{"title":"Topcoats \u0026 Deck Paints","description":"","products":[{"product_id":"hempel-silic-one-propeller-kit","title":"Hempel Silic One Propeller Kit","description":"\u003cp\u003e\u003cstrong\u003eHempel’s Silic One Propeller Kit\u003c\/strong\u003e is a biocide-free fouling-release system for marine propellers and stern gear below the waterline. The kit contains 375ml of Hempel’s Silic One Tiecoat 27450 and 375ml of black Hempel’s Silic One 77450. Its silicone and hydrogel technology creates a smooth, low-friction surface that makes it difficult for fouling organisms to attach and supports self-cleaning while the propeller is in use.\u003c\/p\u003e\n\u003cp\u003eThe Silic One Propeller Kit combines the adhesion stage and the fouling-release topcoat in one 750ml pack. Hempel’s Silic One Tiecoat is a high-solids, silicone-based tiecoat that bonds the primer system to Hempel’s Silic One. The black Silic One topcoat forms the final glossy, low-friction surface.\u003c\/p\u003e\n\u003cp\u003eThis is a fouling-release system rather than a conventional biocidal antifouling. It does not release biocides into the water. Instead, its hydrogel micro-layer gives the coated surface water-like properties, reducing organism attachment and helping growth release as the propeller rotates and the vessel moves through the water.\u003c\/p\u003e\n\u003ch4\u003eKit Contents\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Hempel’s Silic One Tiecoat 27450, Yellow 23410, 375ml\u003c\/li\u003e\n\u003cli\u003e1 x Hempel’s Silic One 77450, Black 19990, 375ml\u003c\/li\u003e\n\u003cli\u003eTotal coating volume: 750ml\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHempel’s Light Primer 45551 is not included.\u003c\/strong\u003e A bare or untreated propeller must be prepared and epoxy primed before the supplied Tiecoat and Silic One topcoat are applied.\u003c\/p\u003e\n\u003ch4\u003eCompatibility and Intended Use\u003c\/h4\u003e\n\u003cp\u003eThe propeller system is intended for exterior use below the waterline. Hempel states that it can be applied to all types of propeller metals and alloys. Epoxy- and glass-fibre-based composites may also be coated when the correct primer system is used.\u003c\/p\u003e\n\u003cp\u003eFor bare or untreated propellers, Hempel’s propeller specification uses two coats of Hempel’s Light Primer, followed by one coat of Hempel’s Silic One Tiecoat and one coat of Hempel’s Silic One. Silic One must not be applied directly to an uncoated surface; it is applied only over the specified Tiecoat.\u003c\/p\u003e\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\u003cp\u003eRemove all existing antifouling from previously coated propellers. Clean the substrate with a suitable detergent such as Hempel’s Pre-Clean. When cleaning aluminium propellers with Hempel’s Pre-Clean, dilute it 1:20 as specified by Hempel.\u003c\/p\u003e\n\u003cp\u003eCreate a clearly perceptible surface profile using 40-grit abrasive paper or another mechanical preparation method; abrasive blasting is preferred where suitable. Wash with fresh water and allow the surface to dry completely. Apply the primer as soon as possible after preparation to reduce the risk of oxidation.\u003c\/p\u003e\n\u003ch4\u003eApplication System\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eApply the first coat of Hempel’s Light Primer, thinned 20% in accordance with the primer instructions.\u003c\/li\u003e\n\u003cli\u003eApply the second coat of Hempel’s Light Primer, thinned 5% in accordance with the primer instructions.\u003c\/li\u003e\n\u003cli\u003eApply one full coat of Hempel’s Silic One Tiecoat 27450.\u003c\/li\u003e\n\u003cli\u003eApply one full coat of Hempel’s Silic One 77450, using as much product as possible without causing runs or sagging.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eStir both supplied coatings thoroughly before use. Apply by brush or roller using soft, even strokes and ensure complete coverage. Neither the Tiecoat nor the Silic One topcoat may be thinned. Hempel’s Thinner 808, product code 08081, is specified for cleaning tools.\u003c\/p\u003e\n\u003cp\u003eThe surface temperature must remain above 10°C during application and curing. Relative humidity must remain between 30% and 85%. Provide sufficient ventilation and avoid condensation on the freshly applied coating.\u003c\/p\u003e\n\u003ch4\u003eOvercoating and Immersion\u003c\/h4\u003e\n\u003cp\u003eAt 20°C, overcoat the first Light Primer coat after 4 hours and within 30 days. Apply the Silic One Tiecoat over the second Light Primer coat after 2–4 hours. Apply the black Silic One topcoat over the Tiecoat after 8–48 hours.\u003c\/p\u003e\n\u003cp\u003eAt 10°C, the corresponding intervals are 8 hours to 60 days, 4–8 hours and 16–48 hours. At 30°C, the intervals are 3 hours to 22 days, 1–2 hours and 4–24 hours.\u003c\/p\u003e\n\u003cp\u003eAfter the final Silic One coat, allow at least 24 hours before immersion at 20°C or 30°C, or at least 36 hours at 10°C. The maximum time before immersion is one month.\u003c\/p\u003e\n\u003ch4\u003eCoverage and Technical Performance\u003c\/h4\u003e\n\u003cp\u003eBoth supplied coatings have a theoretical spreading rate of 10m²\/L at their specified reference film thicknesses. Each 375ml component therefore provides approximately 3.75m² of calculated theoretical coverage. Practical coverage will be lower on complex propeller geometry and where application losses or a heavier non-sag film increase consumption.\u003c\/p\u003e\n\u003cp\u003eThe Tiecoat has a recommended dry film thickness of 70µm and the Silic One topcoat has a recommended dry film thickness of 80µm. Both products have a pot life of approximately 60 minutes at 20°C once the container is opened for use.\u003c\/p\u003e\n\u003ch4\u003eCleaning and Maintenance\u003c\/h4\u003e\n\u003cp\u003eSelf-cleaning is most effective at higher operating speeds, although Hempel states that self-cleaning can also occur at lower speeds with regular use. Where manual cleaning is needed, use a dense sponge or cloth and rinse with fresh water, or use a fresh-water pressure wash within Hempel’s stated limit. Do not use a hard brush or stiff bristles on the silicone surface.\u003c\/p\u003e\n\u003cp\u003eWhere the coating is damaged, rebuild the specified coating system over the affected area. Traditional antifouling will not adhere directly to Silic One; the silicone coating must be removed before changing back to a conventional antifouling system.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHempel Silic One Propeller Kit, part number HP-7745P-99980\u003c\/li\u003e\n\u003cli\u003eBiocide-free silicone and hydrogel fouling-release system\u003c\/li\u003e\n\u003cli\u003eDesigned for propellers and stern gear below the waterline\u003c\/li\u003e\n\u003cli\u003e375ml Silic One Tiecoat 27450 included\u003c\/li\u003e\n\u003cli\u003e375ml black Silic One 77450 topcoat included\u003c\/li\u003e\n\u003cli\u003eTotal supplied coating volume: 750ml\u003c\/li\u003e\n\u003cli\u003eLight Primer is required on bare or untreated surfaces and is not included\u003c\/li\u003e\n\u003cli\u003eSuitable for all types of propeller metals and alloys when correctly primed\u003c\/li\u003e\n\u003cli\u003eAlso suitable for epoxy- and glass-fibre-based composites with the specified primer\u003c\/li\u003e\n\u003cli\u003eLow-friction surface reduces attachment of fouling organisms\u003c\/li\u003e\n\u003cli\u003eSelf-cleaning action increases with propeller movement and vessel speed\u003c\/li\u003e\n\u003cli\u003eTiecoat standard shade: Yellow 23410\u003c\/li\u003e\n\u003cli\u003eTopcoat standard shade: Black 19990\u003c\/li\u003e\n\u003cli\u003eTiecoat volume solids: 67%\u003c\/li\u003e\n\u003cli\u003eTopcoat volume solids: 78 ± 2%\u003c\/li\u003e\n\u003cli\u003eTiecoat reference dry film thickness: 70µm\u003c\/li\u003e\n\u003cli\u003eTopcoat reference dry film thickness: 80µm\u003c\/li\u003e\n\u003cli\u003eTheoretical spreading rate: 10m²\/L for each component\u003c\/li\u003e\n\u003cli\u003eCalculated theoretical system coverage: approximately 3.75m² per kit\u003c\/li\u003e\n\u003cli\u003eApply the supplied coatings by brush or roller\u003c\/li\u003e\n\u003cli\u003eNo thinning permitted for the Tiecoat or Silic One topcoat\u003c\/li\u003e\n\u003cli\u003eTool cleaner: Hempel’s Thinner 808, 08081\u003c\/li\u003e\n\u003cli\u003ePot life: approximately 60 minutes at 20°C for each supplied coating\u003c\/li\u003e\n\u003cli\u003eMinimum surface temperature: above 10°C\u003c\/li\u003e\n\u003cli\u003eApplication and curing humidity range: 30–85%\u003c\/li\u003e\n\u003cli\u003eMinimum immersion time after the final coat: 24 hours at 20°C\u003c\/li\u003e\n\u003cli\u003eMaximum time before immersion: one month\u003c\/li\u003e\n\u003cli\u003eTiecoat Product Data Sheet issued October 2025\u003c\/li\u003e\n\u003cli\u003eSilic One Product Data Sheet issued November 2025\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included in the Hempel Silic One Propeller Kit?\u003c\/strong\u003e\u003cbr\u003eThe kit contains one 375ml tin of Hempel’s Silic One Tiecoat 27450 and one 375ml tin of black Hempel’s Silic One 77450, giving a total supplied volume of 750ml.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Hempel’s Light Primer included?\u003c\/strong\u003e\u003cbr\u003eNo. Light Primer is not included in this kit. Hempel’s propeller specification requires two coats of Light Primer on a bare or untreated propeller before applying the supplied Tiecoat and Silic One topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Silic One a conventional antifouling paint?\u003c\/strong\u003e\u003cbr\u003eNo. It is a biocide-free fouling-release coating. Its silicone and hydrogel surface makes it more difficult for organisms to attach and supports release and self-cleaning during use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich propeller materials are compatible?\u003c\/strong\u003e\u003cbr\u003eHempel states that the propeller system can be used on all types of metals and alloys. Epoxy- and glass-fibre-based composites are also possible when the correct primer is applied first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Silic One be applied directly to bare metal?\u003c\/strong\u003e\u003cbr\u003eNo. The bare substrate must be cleaned, mechanically roughened and coated with the specified Hempel Light Primer system. Silic One itself must be applied only over Hempel’s Silic One Tiecoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should an aluminium propeller be cleaned?\u003c\/strong\u003e\u003cbr\u003eRemove existing antifouling and clean with a suitable detergent. When using Hempel’s Pre-Clean on aluminium, Hempel specifies a 1:20 dilution. Rinse with fresh water, allow the surface to dry and prime promptly after abrasion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat abrasive should be used?\u003c\/strong\u003e\u003cbr\u003eHempel specifies 40-grit abrasive paper or another mechanical method that creates a clearly perceptible roughness. Abrasive blasting is preferred where appropriate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats are required for a bare propeller?\u003c\/strong\u003e\u003cbr\u003eThe propeller-specific Hempel system comprises two coats of Light Primer, one full coat of Silic One Tiecoat and one full coat of Silic One topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Tiecoat or topcoat be thinned?\u003c\/strong\u003e\u003cbr\u003eNo. Hempel states that thinning is not allowed for either supplied product. Use Hempel’s Thinner 808, product code 08081, for cleaning application tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much area does the kit cover?\u003c\/strong\u003e\u003cbr\u003eEach component has a theoretical spreading rate of 10m²\/L. A 375ml tin therefore covers approximately 3.75m² theoretically at the specified film thickness, making the calculated theoretical system coverage approximately 3.75m². Practical coverage will be lower on propellers because of their shape and application losses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the overcoating interval at 20°C?\u003c\/strong\u003e\u003cbr\u003eApply the second Light Primer coat 4 hours to 30 days after the first. Apply the Tiecoat 2–4 hours after the second primer coat, then apply Silic One 8–48 hours after the Tiecoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can the propeller be immersed?\u003c\/strong\u003e\u003cbr\u003eAt 20°C or 30°C, wait at least 24 hours after the final coat. At 10°C, wait at least 36 hours. In all cases, immerse within one month.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if the Tiecoat-to-topcoat interval is exceeded?\u003c\/strong\u003e\u003cbr\u003eApply a fresh coat of Silic One Tiecoat before continuing with the Silic One topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Silic One self-clean at low speed?\u003c\/strong\u003e\u003cbr\u003eSelf-cleaning is most effective at higher speed, but Hempel states that it can also occur at lower speed with constant use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the coated propeller be cleaned?\u003c\/strong\u003e\u003cbr\u003eUse a dense sponge or cloth followed by a fresh-water rinse, or a suitable fresh-water pressure wash. Do not use a hard brush, stiff bristles or similarly aggressive cleaning tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan traditional antifouling be applied over Silic One?\u003c\/strong\u003e\u003cbr\u003eNo. Only compatible fouling-release coatings will adhere to Silic One. Remove the silicone system before changing to a traditional antifouling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the products be stored?\u003c\/strong\u003e\u003cbr\u003eStore in original, tightly closed containers at a minimum of 5°C in a dry, shaded, cool and well-ventilated area, protected from direct sunlight, rain, snow, heat and ignition sources.\u003c\/p\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 39.356%;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 60.644%;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eProduct Name\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel's Silic One Propeller Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eProduct Category\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eBiocide-Free Propeller Fouling-Release System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eIntended Area\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eExterior, Below the Waterline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePrimary Application\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMarine Propellers and Stern Gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTotal Supplied Volume\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e750ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eKit Component 1\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel's Silic One Tiecoat 27450, 375ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eKit Component 2\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel's Silic One 77450 Black Topcoat, 375ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eLight Primer Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePrimer Requirement\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eTwo Coats of Hempel's Light Primer on Bare or Untreated Propellers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eCompatible Propeller Materials\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eAll Types of Metals and Alloys When Correctly Primed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eAdditional Compatible Materials\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eEpoxy- and Glass-Fibre-Based Composites with the Specified Primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eFouling-Control Method\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eSilicone and Hydrogel Fouling Release; Biocide-Free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eSelf-Cleaning Behaviour\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMost Effective at Higher Speed; Possible at Lower Speed with Constant Use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eExisting Antifouling\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eRemove Before Applying the Propeller System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eCleaning Product\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eSuitable Detergent such as Hempel's Pre-Clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePre-Clean Dilution for Aluminium\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e1:20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eMechanical Preparation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e40-Grit Abrasive Paper or Other Mechanical Method; Abrasive Blasting Preferred\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePost-Abrasion Cleaning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eWash with Fresh Water and Allow to Dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eOxidation Control\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eApply Primer as Soon as Possible After Surface Preparation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePropeller System - Coat 1\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel's Light Primer, Thinned 20%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePropeller System - Coat 2\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel's Light Primer, Thinned 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePropeller System - Coat 3\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eOne Full Coat of Silic One Tiecoat 27450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePropeller System - Coat 4\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eOne Full Coat of Silic One 77450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Product Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e27450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Standard Shade \/ Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eYellow \/ Cream 23410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Finish\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eSemi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Volume Solids\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e67%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Specific Gravity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e1.2kg\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Reference Dry Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e70µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Recommended Wet Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e105µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Theoretical Spreading Rate\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e10m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Approximate Theoretical Coverage per 375ml\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e3.75m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Application Method\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eBrush or Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Number of Coats\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eOne Full Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Thinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eNot Permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Cleaner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel's Thinner 808, 08081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Pot Life at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e60 Minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Hard Dry at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e3 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Hard Dry at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e1½ Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Hard Dry at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e1 Hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Fully Cured at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e4 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Fully Cured at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e2 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Fully Cured at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e1 Day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Flash Point\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e33°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat EU VOC Content\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e232g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Shelf Life at 25°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e18 Months in Original Unopened Container\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat PDS Issue\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eOctober 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Product Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e77450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Standard Shade \/ Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eJet Black \/ Black 19990\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Finish\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eGlossy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Volume Solids\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e78 ± 2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Specific Gravity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e1kg\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Reference Dry Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e80µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Recommended Wet Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e102µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Theoretical Spreading Rate\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e10m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Approximate Theoretical Coverage per 375ml\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e3.75m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Application Method\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eBrush or Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Thinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eNot Permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Cleaner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel's Thinner 808, 08081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Pot Life at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e60 Minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Hard Dry at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e4 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Hard Dry at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e2 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Hard Dry at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e1 Hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Fully Cured at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e5 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Fully Cured at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e3 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Fully Cured at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e2 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Flash Point\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e47°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat EU VOC Content\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e117g\/L; Value May Vary by Shade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat Shelf Life at 25°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e18 Months in Original Unopened Container\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTopcoat PDS Issue\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eNovember 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eMinimum Surface Temperature\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eAbove 10°C During Application and Curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e30–85% During Application and Curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eVentilation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMaintain Sufficient Ventilation During Application, Drying and Curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eCondensation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eAvoid Condensation on Freshly Applied Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eFirst Light Primer Overcoat at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 8 Hours; Maximum 60 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eFirst Light Primer Overcoat at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 4 Hours; Maximum 30 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eFirst Light Primer Overcoat at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 3 Hours; Maximum 22 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eSecond Light Primer to Tiecoat at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 4 Hours; Maximum 8 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eSecond Light Primer to Tiecoat at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 2 Hours; Maximum 4 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eSecond Light Primer to Tiecoat at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 1 Hour; Maximum 2 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat to Silic One at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 16 Hours; Maximum 48 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat to Silic One at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 8 Hours; Maximum 48 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat to Silic One at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eMinimum 4 Hours; Maximum 24 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTiecoat Interval Exceeded\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eApply a New Coat of Tiecoat Before the Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eMinimum Immersion Time at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e36 Hours After Final Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eMinimum Immersion Time at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e24 Hours After Final Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eMinimum Immersion Time at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e24 Hours After Final Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eMaximum Time Before Immersion\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e1 Month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eApplication Quantity Guidance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eApply as Much Paint as Possible Without Sagging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eRoutine Cleaning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eDense Sponge or Cloth and Fresh-Water Rinse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003ePressure Washing\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eFresh Water; Maximum 200 bar per Topcoat PDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eCleaning Restriction\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eDo Not Use a Hard Brush or Stiff Bristles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTraditional Antifouling Compatibility\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eTraditional Antifouling Will Not Adhere Directly; Remove Silic One First\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eRepair Method\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eRebuild the Specified Coating System over the Damaged Area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eTool Cleaner for Supplied Coatings\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eHempel's Thinner 808, 08081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eMinimum Storage Temperature\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003e5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eDry, Shaded, Cool and Well Ventilated; Protect from Sunlight, Rain, Snow, Heat and Ignition Sources\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 39.356%;\"\u003eContainer Storage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 60.644%;\"\u003eKeep Tightly Closed and Handle with Care\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Hempel Blakes","offers":[{"title":"Default Title","offer_id":46501135974677,"sku":"MA-H7745P-99980-750ML","price":38.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/SilicOnePropellerKit_1_b14d3da6-5f70-49f4-9a7b-35c2c8cbf301.png?v=1773134612"},{"product_id":"hempel-bilge-locker-topcoat-paint","title":"Hempel Bilge \u0026 Locker Topcoat Paint","description":"\u003cp\u003e\u003cstrong\u003eHempel Bilge \u0026amp; Locker Paint 5112B\u003c\/strong\u003e is a high-opacity semi-gloss marine topcoat for bilges, lockers and working areas above the waterline. Suitable for glass fibre, wood and steel, it provides durable resistance to water and oil. It is not suitable for permanent immersion.\u003c\/p\u003e\n\u003cp\u003eHempel Bilge \u0026amp; Locker Paint 5112B is a high-opacity semi-gloss marine finishing coat developed for protecting and decorating bilges, lockers and other working spaces above the waterline. Its durable formulation provides good resistance to water and oil while producing a clean, semi-gloss finish.\u003c\/p\u003e\n\u003cp\u003eSuitable for properly prepared glass fibre, wood and steel, the paint can be used on interior and exterior areas of boats above the waterline. Uncoated surfaces should be cleaned, sanded and primed with the appropriate Hempel primer. Glass fibre surfaces should be vigorously abraded before application.\u003c\/p\u003e\n\u003cp\u003eThe coating can be applied by brush, roller, paint pad or spray. Apply two to three coats for the recommended system, sanding and removing dust between coats where a smoother finish is required. Use Hempel Thinner 811 for brush, roller or paint pad application and Hempel Thinner 808 for spray application.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-opacity semi-gloss marine topcoat\u003c\/li\u003e\n\u003cli\u003eDurable coating with good water and oil resistance\u003c\/li\u003e\n\u003cli\u003eDesigned for bilges, lockers and marine working areas\u003c\/li\u003e\n\u003cli\u003eSuitable for glass fibre, wood and steel\u003c\/li\u003e\n\u003cli\u003eFor interior and exterior use above the waterline\u003c\/li\u003e\n\u003cli\u003eNot suitable for permanent immersion\u003c\/li\u003e\n\u003cli\u003eTheoretical coverage of 11m² per litre\u003c\/li\u003e\n\u003cli\u003eApply by brush, roller, paint pad or spray\u003c\/li\u003e\n\u003cli\u003eUse Hempel Thinner 811 for brush, roller or paint pad application\u003c\/li\u003e\n\u003cli\u003eUse Hempel Thinner 808 for spray application\u003c\/li\u003e\n\u003cli\u003eRecommended application of two to three coats\u003c\/li\u003e\n\u003cli\u003eTouch dry in approximately three hours at 20°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Hempel Bilge \u0026amp; Locker Paint 5112B used for?\u003c\/strong\u003e\u003cbr\u003eIt is used as a decorative and protective semi-gloss finishing coat for bilges, lockers and other marine working areas above the waterline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surfaces can it be applied to?\u003c\/strong\u003e\u003cbr\u003eIt is suitable for properly prepared glass fibre, also known as GRP, wood and steel. Glass fibre should be vigorously abraded before application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used below the waterline?\u003c\/strong\u003e\u003cbr\u003eNo. It is specified for use above the waterline and is not suitable for permanent immersion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much area does it cover?\u003c\/strong\u003e\u003cbr\u003eThe theoretical spreading rate is 11m² per litre at the recommended 40-micron dry film thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich thinner should be used?\u003c\/strong\u003e\u003cbr\u003eUse Hempel Thinner 811 for brush, roller or paint pad application and Hempel Thinner 808 for spray application.\u003c\/p\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 33.6315%;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 66.3685%;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHigh-Opacity Marine Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eSemi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eIntended Use\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eBilges, Lockers and Marine Working Areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSuitable Surfaces\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eGlass Fibre, Wood and Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eApplication Area\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eInterior and Exterior Above the Waterline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eWater Resistance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eOil Resistance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTheoretical Coverage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e11m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eDry Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e40 Microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eApplication Methods\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eBrush, Roller, Paint Pad or Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eBrush, Roller or Paint Pad Thinner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel Thinner 811, Maximum 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSpray Thinner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel Thinner 808, Maximum 10–15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eRecommended Coats\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e2–3 Coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTouch Dry\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e3 Hours at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eRecommended Previous Coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel Wood Impreg 02362 for New Wood or Hempel Primer Undercoat 13201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePermanent Immersion\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eNot Suitable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Hempel Blakes","offers":[{"title":"750ml \/ Light Grey","offer_id":46501140594965,"sku":"MA-H5112B-19500-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Mid Grey","offer_id":46501140627733,"sku":"MA-H5112B-11480-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ White","offer_id":46501140660501,"sku":"MA-H5112B-10000-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Light Grey","offer_id":56543895454073,"sku":"MA-H5112B-19500-2.5L","price":53.98,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Mid Grey","offer_id":56543895486841,"sku":"MA-H5112B-11480-2.5L","price":53.98,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ White","offer_id":56543895519609,"sku":"MA-H5112B-10000-2.5L","price":53.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/Bilge-_-Locker-white.jpg?v=1704814478"},{"product_id":"hempel-brilliant-gloss-topcoat-paint","title":"Hempel Brilliant Gloss Topcoat Paint","description":"\u003cp\u003e\u003cstrong\u003eHempel Brilliant Gloss 53200\u003c\/strong\u003e is a 750ml high-gloss modified alkyd marine topcoat for wood, steel and glass fibre surfaces above the waterline. Its flexible finish provides colour and gloss retention while resisting salt water and environmental pollutants.\u003c\/p\u003e\n\u003cp\u003eHempel Brilliant Gloss 53200 is a high-gloss marine finishing coat developed for protecting and decorating interior and exterior boat surfaces above the waterline. Its modified alkyd formulation provides a flexible finish with strong colour and gloss retention.\u003c\/p\u003e\n\u003cp\u003eSuitable for properly prepared wood, steel and glass fibre, the paint can be used on areas including topsides, cabins, superstructures and marine trim. Uncoated surfaces should be sanded, cleaned and primed with the appropriate Hempel primer before application.\u003c\/p\u003e\n\u003cp\u003eThe coating can be applied by brush, roller, paint pad or spray. Apply two to three coats for the recommended system, sanding and removing dust between coats where a smoother finish is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-gloss modified alkyd marine topcoat\u003c\/li\u003e\n\u003cli\u003eFlexible coating with strong colour and gloss retention\u003c\/li\u003e\n\u003cli\u003eResistant to salt water and environmental pollutants\u003c\/li\u003e\n\u003cli\u003eSuitable for wood, steel and glass fibre\u003c\/li\u003e\n\u003cli\u003eFor interior and exterior use above the waterline\u003c\/li\u003e\n\u003cli\u003eTheoretical coverage of 11.2m² per litre\u003c\/li\u003e\n\u003cli\u003eApply by brush, roller, paint pad or spray\u003c\/li\u003e\n\u003cli\u003eUse Hempel Thinner 811 for brush, roller or paint pad application\u003c\/li\u003e\n\u003cli\u003eUse Hempel Thinner 808 for spray application\u003c\/li\u003e\n\u003cli\u003eRecommended application of two to three coats\u003c\/li\u003e\n\u003cli\u003eTouch dry in approximately four hours at 20°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Hempel Brilliant Gloss 53200 used for?\u003c\/strong\u003e\u003cbr\u003eIt is used as a decorative and protective high-gloss finishing coat on interior and exterior marine surfaces above the waterline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surfaces can it be applied to?\u003c\/strong\u003e\u003cbr\u003eIt is suitable for properly prepared and primed wood, steel and glass fibre, also known as GRP.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used below the waterline?\u003c\/strong\u003e\u003cbr\u003eNo. It is specified for use above the waterline and is not intended for permanently immersed surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much area will a 750ml tin cover?\u003c\/strong\u003e\u003cbr\u003eA 750ml tin provides approximately 8.4m² of theoretical coverage, based on a spreading rate of 11.2m² per litre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich thinner should be used?\u003c\/strong\u003e\u003cbr\u003eUse Hempel Thinner 811 for brush, roller or paint pad application and Hempel Thinner 808 for spray application.\u003c\/p\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 45.6172%;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 54.3828%;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eHempel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eModified Alkyd Marine Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003ePack Size\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003e750ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eHigh Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eSuitable Surfaces\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eWood, Steel and Glass Fibre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eApplication Area\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eInterior and Exterior Above the Waterline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eTheoretical Coverage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003e11.2m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eDry Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003e50 Microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eApplication Methods\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eBrush, Roller, Paint Pad or Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eBrush, Roller or Paint Pad Thinner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eHempel Thinner 811, Maximum 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eSpray Thinner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eHempel Thinner 808, Maximum 10–15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eRecommended Coats\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003e2–3 Coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eTouch Dry\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003e4 Hours at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 45.6172%;\"\u003eRecommended Previous Coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 54.3828%;\"\u003eHempel Primer Undercoat 13201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Hempel Blakes","offers":[{"title":"375ml \/ Pure White","offer_id":56559061434745,"sku":"MA-H53200-10231-375ML","price":16.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Black","offer_id":46501140988181,"sku":"MA-H53200-19990-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Cobalt Blue","offer_id":46501141086485,"sku":"MA-H53200-34161-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Cream","offer_id":46501141119253,"sku":"MA-H53200-21401-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Flag Blue","offer_id":46501141152021,"sku":"MA-H53200-35141-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Marine Green","offer_id":46501141217557,"sku":"MA-H53200-46121-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Matterhorn White","offer_id":46501141250325,"sku":"MA-H53200-10121-750ML","price":24.95,"currency_code":"GBP","in_stock":false},{"title":"750ml \/ Off White","offer_id":46501141283093,"sku":"MA-H53200-10381-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Pale Grey","offer_id":46501141315861,"sku":"MA-H53200-12011-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Polar White","offer_id":46501141348629,"sku":"MA-H53200-10501-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Pure White","offer_id":46501141381397,"sku":"MA-H53200-10231-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Radiant Red","offer_id":46501141414165,"sku":"MA-H53200-54121-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Souvenirs Blue","offer_id":46501141479701,"sku":"MA-H53200-32800-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Survival Orange","offer_id":46501141512469,"sku":"MA-H53200-50190-750ML","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Town Grey","offer_id":46501141545237,"sku":"MA-H53200-10141-750ML","price":24.95,"currency_code":"GBP","in_stock":false},{"title":"2.5 Litre \/ Pure White","offer_id":56559061467513,"sku":"MA-H53200-10231-2.5L","price":64.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/Hempel-HP-53200-10381.jpg?v=1704810894"},{"product_id":"hempel-non-slip-deck-coating-paint-750ml","title":"Hempel Non-Slip Deck Coating Topcoat Paint - 750ml","description":"\u003cp\u003e\u003cstrong\u003eHempel’s Non-Slip Deck Coating 56251\u003c\/strong\u003e is a quick-drying acrylic marine topcoat containing fine granules that create a textured anti-slip finish. It is suitable for glass fibre or GRP, wood and steel on interior and exterior surfaces above the waterline. The theoretical spreading rate is 9.2m² per litre at a recommended dry film thickness of 50 microns.\u003c\/p\u003e\n\u003cp\u003eDeveloped for boat decks and other above-waterline areas where additional traction is required, the integrated granules create a consistent textured finish without requiring a separately broadcast anti-slip aggregate. The coating provides good resistance to weathering and abrasion when applied as part of a correctly specified marine coating system.\u003c\/p\u003e\n\u003cp\u003eHempel lists Hempel’s Primer Undercoat and Hempel’s Light Primer as the recommended previous coats. New, bare, repaired or exposed substrates should therefore be prepared and primed using the appropriate Hempel system. Existing compatible coatings must be sound, clean and dry before overcoating. Where the maximum overcoating interval has been exceeded, the surface must be roughened to maintain intercoat adhesion.\u003c\/p\u003e\n\u003cp\u003eStir the coating thoroughly before use and apply it by brush, roller or paint pad. Hempel’s Thinner 808, product code 08081, is specified for thinning and tool cleaning. Thinning should be kept to an absolute minimum and must not exceed 5% by volume. Avoid excessive film thickness, as this can affect drying and coating performance.\u003c\/p\u003e\n\u003cp\u003eApply only to a clean, dry surface with a temperature at least 3°C above the dew point. Relative humidity must remain below 85% during drying and curing, and sufficient ventilation must be maintained. At 20°C, the coating is touch dry in approximately two hours and ready to sand in approximately three hours.\u003c\/p\u003e\n\u003cp\u003eAt 20°C, the normal overcoating interval is three to 72 hours. At 10°C, the interval is six hours to six days. Any masking tape used to define deck areas should be removed while the coating is still wet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor marine deck applications only. This product is not intended for domestic or household decking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eQuick-drying acrylic marine deck topcoat\u003c\/li\u003e\n\u003cli\u003eOfficial Hempel product code 56251\u003c\/li\u003e\n\u003cli\u003eContains integrated fine anti-slip granules\u003c\/li\u003e\n\u003cli\u003eCreates a textured surface for increased traction\u003c\/li\u003e\n\u003cli\u003eNo separately broadcast anti-slip aggregate required\u003c\/li\u003e\n\u003cli\u003eGood resistance to weathering and abrasion\u003c\/li\u003e\n\u003cli\u003eSuitable for glass fibre and GRP\u003c\/li\u003e\n\u003cli\u003eSuitable for wood and steel\u003c\/li\u003e\n\u003cli\u003eFor interior and exterior marine surfaces\u003c\/li\u003e\n\u003cli\u003eFor use above the waterline only\u003c\/li\u003e\n\u003cli\u003eIntended for boat decks and marine walk-on areas\u003c\/li\u003e\n\u003cli\u003eNot intended for domestic household decking\u003c\/li\u003e\n\u003cli\u003eStandard shade White 10000\u003c\/li\u003e\n\u003cli\u003eFlat gloss classification in the current Product Data Sheet\u003c\/li\u003e\n\u003cli\u003eTheoretical coverage of 9.2m² per litre\u003c\/li\u003e\n\u003cli\u003eRecommended dry film thickness of 50 microns\u003c\/li\u003e\n\u003cli\u003eRecommended wet film thickness of 109 microns\u003c\/li\u003e\n\u003cli\u003eApply by brush, roller or paint pad\u003c\/li\u003e\n\u003cli\u003eMaximum thinning of 5% by volume\u003c\/li\u003e\n\u003cli\u003eUse Hempel’s Thinner 808, product code 08081\u003c\/li\u003e\n\u003cli\u003eHempel’s Thinner 808 is also specified for tool cleaning\u003c\/li\u003e\n\u003cli\u003eRecommended over Hempel’s Primer Undercoat\u003c\/li\u003e\n\u003cli\u003eAlso compatible over Hempel’s Light Primer\u003c\/li\u003e\n\u003cli\u003eTouch dry in approximately two hours at 20°C\u003c\/li\u003e\n\u003cli\u003eTouch dry in approximately four hours at 10°C\u003c\/li\u003e\n\u003cli\u003eReady to sand in approximately three hours at 20°C\u003c\/li\u003e\n\u003cli\u003eOvercoating interval of three to 72 hours at 20°C\u003c\/li\u003e\n\u003cli\u003eOvercoating interval of six hours to six days at 10°C\u003c\/li\u003e\n\u003cli\u003eSurface temperature must be at least 3°C above the dew point\u003c\/li\u003e\n\u003cli\u003eRelative humidity must remain below 85% during drying and curing\u003c\/li\u003e\n\u003cli\u003eShelf life of 60 months at 25°C in original unopened containers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Hempel’s Non-Slip Deck Coating 56251 used for?\u003c\/strong\u003e\u003cbr\u003eIt is used to create a textured anti-slip finishing coat on marine surfaces above the waterline. Typical applications include boat decks and other walk-on areas where additional traction is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich substrates are compatible with the coating?\u003c\/strong\u003e\u003cbr\u003eHempel specifies glass fibre or GRP, wood and steel. Each substrate must be correctly prepared and incorporated into an appropriate Hempel primer and topcoat system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used below the waterline?\u003c\/strong\u003e\u003cbr\u003eNo. Hempel specifies the coating for interior and exterior use above the waterline only. It is not an antifouling or permanently immersed coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the coating create an anti-slip finish?\u003c\/strong\u003e\u003cbr\u003eFine granules are already incorporated into the acrylic topcoat. When the coating is stirred and applied evenly, these granules create the textured finished surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the coating guarantee a completely non-slip surface?\u003c\/strong\u003e\u003cbr\u003eNo coating can guarantee slip prevention in every condition. The textured finish is designed to improve traction, but performance also depends on correct application, coating wear and whether the deck is contaminated by oil, fuel, mud, algae or other substances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Hempel’s Non-Slip Deck Coating require a primer?\u003c\/strong\u003e\u003cbr\u003eHempel lists Hempel’s Primer Undercoat and Hempel’s Light Primer as the recommended previous coats. Bare, repaired or exposed surfaces should be primed using the appropriate system rather than treating the deck coating as a universal direct-to-substrate product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be applied over an existing painted deck?\u003c\/strong\u003e\u003cbr\u003eIt may be applied over a sound and compatible existing coating once the surface has been properly cleaned, dried and prepared. Loose, damaged or incompatible coatings must be removed or repaired. If the relevant maximum overcoating interval has been exceeded, roughen the surface before recoating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it provide corrosion protection for steel?\u003c\/strong\u003e\u003cbr\u003eHempel identifies this product as a finishing topcoat rather than a standalone anticorrosive primer. Steel protection therefore depends on correct surface preparation and the specified underlying primer system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much area does one litre cover?\u003c\/strong\u003e\u003cbr\u003eThe current theoretical spreading rate is 9.2m² per litre at the recommended 50-micron dry film thickness. Actual coverage will vary with the surface profile, application method and normal coating losses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich thinner should be used?\u003c\/strong\u003e\u003cbr\u003eUse Hempel’s Thinner 808, product code 08081. It is specified for both thinning the coating and cleaning application tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much thinner can be added?\u003c\/strong\u003e\u003cbr\u003eThe maximum permitted thinning is 5% by volume for brush, roller or paint-pad application. Hempel advises keeping thinning to an absolute minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the coating be applied?\u003c\/strong\u003e\u003cbr\u003eStir it thoroughly before and during application, then apply it evenly with a brush, roller or paint pad. Avoid applying an excessively thick film, as this can affect drying and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take to dry?\u003c\/strong\u003e\u003cbr\u003eAt 20°C, the coating is touch dry in approximately two hours and ready to sand after approximately three hours. At 10°C, it is touch dry in approximately four hours. Drying depends on ventilation, temperature, humidity and applied film thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the overcoating interval?\u003c\/strong\u003e\u003cbr\u003eAt 20°C, the minimum overcoating interval is three hours and the maximum is 72 hours. At 10°C, the interval is six hours to six days. Roughen the surface if the maximum interval is exceeded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan petrol, diesel or oil be left on the coated surface?\u003c\/strong\u003e\u003cbr\u003eNo. Petrol, diesel, oil and acetone should not be allowed to pool because their solvents can damage the coating. Remove spills with a suitable boat shampoo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used on household decking?\u003c\/strong\u003e\u003cbr\u003eNo. This product is intended for marine deck applications and is not suitable for domestic or household decking.\u003c\/p\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 37.9249%;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 62.0751%;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eHempel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eProduct Name\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eHempel’s Non-Slip Deck Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eProduct Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e56251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eQuick-Drying Marine Deck Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eFormulation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eAcrylic Paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eAnti-Slip Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eIntegrated Fine Granules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eFinished Surface\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eTextured Anti-Slip Finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eGloss Classification\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eProduct Description Gloss Reference\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eDescribed by Hempel as Semi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eStandard Shade \/ Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eWhite 10000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eSuitable Surfaces\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eGlass Fibre \/ GRP, Wood and Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eApplication Area\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eInterior and Exterior Above the Waterline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003ePermanent Immersion\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eNot Suitable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eIntended Market\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eMarine Deck Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eHousehold Decking\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eNot Intended for Domestic or Household Decking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eResistance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eGood Resistance to Weathering and Abrasion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eTheoretical Coverage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e9.2m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eVolume Solids\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e46 ± 2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eSpecific Gravity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e1.3kg\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eRecommended Dry Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e50 Microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eRecommended Wet Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e109 Microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eApplication Methods\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eBrush, Roller or Paint Pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eMaximum Brush Thinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e5% by Volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eMaximum Roller Thinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e5% by Volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eMaximum Paint-Pad Thinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e5% by Volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eThinning Guidance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eKeep Thinning to an Absolute Minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eRecommended Thinner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eHempel’s Thinner 808, 08081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eTool Cleaner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eHempel’s Thinner 808, 08081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eMixing\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eStir Well Before Use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eSurface Cleanliness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eRemove Oil, Grease and Other Contaminants with Suitable Detergent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eApplication Surface Condition\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eClean and Dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eSurface Temperature\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eAt Least 3°C Above the Dew Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eMaximum Relative Humidity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eBelow 85% During Drying and Curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eRecommended Previous Coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eHempel’s Primer Undercoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eAlternative Previous Coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eHempel’s Light Primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eRecommended Subsequent Coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eTouch Dry at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e4 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eTouch Dry at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e2 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eReady to Sand at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e3 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eOvercoating Interval at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eMinimum 6 Hours; Maximum 6 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eOvercoating Interval at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eMinimum 3 Hours; Maximum 72 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eMaximum Overcoating Interval Exceeded\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eRoughen Surface to Ensure Intercoat Adhesion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eMasking Tape Removal\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eRemove While Coating Is Still Wet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eDrying Conditions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eMaintain Sufficient Ventilation and Avoid Condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eFuel and Solvent Spills\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eDo Not Allow Petrol, Diesel, Oil or Acetone to Pool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eSpill Cleaning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eUse a Suitable Boat Shampoo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eFlash Point\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e26°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eEU VOC Content\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e477g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eColour Stability Note\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eMay Be Affected by Chemicals, High Temperatures or Inadequate Ventilation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eShelf Life at 25°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e60 Months in Original Unopened Containers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eMinimum Storage Temperature\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eDry, Shaded, Cool and Well Ventilated; Protect from Sunlight, Rain and Snow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eGlobal Warming Potential\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003e9g CO₂e\/m² at 1µm Dry Film Thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 37.9249%;\"\u003eProduct Data Sheet Issue Date\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 62.0751%;\"\u003eOctober 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Hempel Blakes","offers":[{"title":"Light Grey","offer_id":46501143019797,"sku":"MA-H56251-19500-750ML","price":22.98,"currency_code":"GBP","in_stock":true},{"title":"Mid Grey","offer_id":46501143052565,"sku":"MA-H56251-11480-750ML","price":22.98,"currency_code":"GBP","in_stock":true},{"title":"Navy Blue","offer_id":46501143085333,"sku":"MA-H56251-30100-750ML","price":22.98,"currency_code":"GBP","in_stock":true},{"title":"Pale Cream","offer_id":46501143118101,"sku":"MA-H56251-22210-750ML","price":22.98,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":46501143150869,"sku":"MA-H56251-10000-750ML","price":22.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/products\/non-slip-s-l1600-20-2-m.jpg?v=1695912338"},{"product_id":"hempel-multicoat-primer-and-topcoat","title":"Hempel MultiCoat Primer And Topcoat Paint","description":"\u003cp\u003e\u003cstrong\u003eHempel’s Multicoat 51120\u003c\/strong\u003e is a high-opacity, semi-gloss alkyd marine primer and topcoat for glass fibre, wood and steel. Designed for interior and exterior areas above the waterline, it can be used as a complete coating system and provides good resistance to sunlight, water and oil. Its theoretical coverage is 11m² per litre at the recommended 40-micron dry film thickness.\u003c\/p\u003e\n\u003cp\u003eHempel’s Multicoat combines the functions of a primer and finishing coat, reducing the number of separate products required for suitable above-waterline projects. It can be used on correctly prepared external and internal marine surfaces, including deck structures, lockers and dry bilge areas that are not subject to permanent immersion. For walked-on deck surfaces, a suitable anti-slip additive or dedicated non-slip coating system is required.\u003c\/p\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free from oil, grease and other contaminants. Bare glass fibre, wood and steel should be prepared according to Hempel’s applicable primer instructions. Previously painted surfaces must be abraded, cleaned and dried before recoating. Where a separate undercoat is required, Hempel lists Hempel’s Primer Undercoat as the recommended previous coat.\u003c\/p\u003e\n\u003cp\u003eWhen using Multicoat as a primer, apply the first coat thinned by no more than 10% with the specified Hempel thinner. For use as a topcoat, apply two to three coats. Sanding between coats and complete dust removal are recommended where a smoother finish is required.\u003c\/p\u003e\n\u003cp\u003eApply by brush, roller or paint pad, with thinning limited to a maximum of 5% for normal topcoat application. Use Hempel’s Thinner 811 (No. 1), product code 08111, for brush, roller and paint-pad application. Hempel’s Thinner 808 (No. 3), product code 08081, is the spray thinner for Hempel one-component topcoats; contact Hempel for Multicoat spray-application parameters.\u003c\/p\u003e\n\u003cp\u003eAt 20°C, Hempel’s Multicoat is touch dry in approximately three hours and ready to sand after 24 hours. The normal overcoating interval at 20°C is eight to 72 hours. Maintain adequate ventilation during application and drying, and keep relative humidity below 85%.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-opacity marine primer and topcoat\u003c\/li\u003e\n\u003cli\u003eOfficial Hempel product code 51120\u003c\/li\u003e\n\u003cli\u003eAlkyd paint formulation\u003c\/li\u003e\n\u003cli\u003eSemi-gloss finish\u003c\/li\u003e\n\u003cli\u003eCan be used as a complete coating system\u003c\/li\u003e\n\u003cli\u003eSuitable for glass fibre, wood and steel\u003c\/li\u003e\n\u003cli\u003eFor interior and exterior use above the waterline\u003c\/li\u003e\n\u003cli\u003eGood resistance to sunlight, water and oil\u003c\/li\u003e\n\u003cli\u003eStandard shade White 10000\u003c\/li\u003e\n\u003cli\u003eTheoretical coverage of 11m² per litre\u003c\/li\u003e\n\u003cli\u003eRecommended dry film thickness of 40 microns\u003c\/li\u003e\n\u003cli\u003eRecommended wet film thickness of 87 microns\u003c\/li\u003e\n\u003cli\u003eApply by brush, roller or paint pad\u003c\/li\u003e\n\u003cli\u003eSpray application possible with guidance from Hempel\u003c\/li\u003e\n\u003cli\u003eUse Hempel’s Thinner 811 for brush, roller or paint-pad application\u003c\/li\u003e\n\u003cli\u003eUse Hempel’s Thinner 808 as the spray thinner\u003c\/li\u003e\n\u003cli\u003eMaximum normal topcoat thinning of 5%\u003c\/li\u003e\n\u003cli\u003eMaximum first-coat thinning of 10% when used as a primer\u003c\/li\u003e\n\u003cli\u003eApply two to three coats when used as a topcoat\u003c\/li\u003e\n\u003cli\u003eSanding between coats recommended for a smoother finish\u003c\/li\u003e\n\u003cli\u003eTouch dry in approximately three hours at 20°C\u003c\/li\u003e\n\u003cli\u003eReady to sand after approximately 24 hours at 20°C\u003c\/li\u003e\n\u003cli\u003eOvercoating interval of eight to 72 hours at 20°C\u003c\/li\u003e\n\u003cli\u003eRelative humidity must remain below 85% during drying and curing\u003c\/li\u003e\n\u003cli\u003eSurface temperature must be at least 3°C above the dew point\u003c\/li\u003e\n\u003cli\u003eShelf life of 60 months at 25°C in unopened containers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Hempel’s Multicoat 51120 used for?\u003c\/strong\u003e\u003cbr\u003eIt is used as a combined primer and semi-gloss topcoat on glass fibre, wood and steel. It is intended for interior and exterior marine surfaces above the waterline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Hempel’s Multicoat be used as both a primer and topcoat?\u003c\/strong\u003e\u003cbr\u003eYes. Hempel states that it can be used as a complete coating system. When it is used as the primer, the first coat may be thinned by up to 10%. Apply two to three coats when using it as a topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich surfaces are compatible with Hempel’s Multicoat?\u003c\/strong\u003e\u003cbr\u003eIt is suitable for correctly prepared glass fibre, wood and steel. Bare substrates must be prepared in accordance with Hempel’s relevant primer instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be applied directly to bare wood?\u003c\/strong\u003e\u003cbr\u003eBare wood must first be prepared according to Hempel’s primer instructions. On a suitably prepared substrate, the first Multicoat coat may be used as the primer coat and thinned by no more than 10%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Hempel’s Multicoat be used below the waterline?\u003c\/strong\u003e\u003cbr\u003eNo. It is specified for interior and exterior use above the waterline and should not be used as a permanently immersed coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats should be applied?\u003c\/strong\u003e\u003cbr\u003eWhen used as a topcoat, Hempel specifies two to three coats. The first coat may be thinned by up to 10% when the product is being used as a primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much area does one litre cover?\u003c\/strong\u003e\u003cbr\u003eThe current theoretical spreading rate is 11m² per litre at a recommended dry film thickness of 40 microns. Actual coverage will vary according to the surface profile, application method and coating losses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich thinner should be used for brush or roller application?\u003c\/strong\u003e\u003cbr\u003eUse Hempel’s Thinner 811 (No. 1), product code 08111. It is a thinner and tool cleaner for Hempel one-component primers, topcoats and varnishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich thinner should be used for spray application?\u003c\/strong\u003e\u003cbr\u003eUse Hempel’s Thinner 808 (No. 3), product code 08081. It is Hempel’s spray thinner and tool cleaner for one-component topcoats. Multicoat spray parameters should be confirmed with Hempel before application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does Hempel’s Multicoat take to dry?\u003c\/strong\u003e\u003cbr\u003eIt is touch dry in approximately six hours at 10°C or three hours at 20°C. At 20°C, it is ready to sand after approximately 24 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the overcoating interval?\u003c\/strong\u003e\u003cbr\u003eAt 20°C, the minimum overcoating interval is eight hours and the maximum is 72 hours. At 10°C, the interval is 16 hours to five and a half days. If the maximum interval is exceeded, roughen the surface before recoating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Hempel’s Multicoat be used on decks?\u003c\/strong\u003e\u003cbr\u003eIt may be used as an above-waterline coating, but a smooth semi-gloss coating alone is not suitable where slip resistance is required. Use a suitable anti-slip additive or dedicated non-slip coating system on walked-on areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes its oil resistance mean spills can be left on the surface?\u003c\/strong\u003e\u003cbr\u003eNo. Petrol, diesel, oil and acetone spills should not be allowed to pool because their solvents can damage the coating. Remove spills using a suitable boat shampoo.\u003c\/p\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 35.5993%;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 64.4007%;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eHempel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eProduct Name\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eHempel’s Multicoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eProduct Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e51120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eHigh-Opacity Primer and Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eFormulation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eAlkyd Paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eStandard Shade \/ Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eWhite 10000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eSemi-Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eSuitable Surfaces\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eGlass Fibre, Wood and Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eApplication Area\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eInterior and Exterior Above the Waterline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eComplete Coating System\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eResistance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eGood Resistance to Sunlight, Water and Oil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eTheoretical Coverage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e11m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eVolume Solids\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e46 ± 2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eSpecific Gravity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e1.2kg\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eRecommended Dry Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e40 Microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eRecommended Wet Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e87 Microns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eApplication Methods\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eBrush, Roller or Paint Pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eSpray Application\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003ePossible; Contact Hempel for Parameters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eBrush \/ Roller Thinner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eHempel’s Thinner 811 (No. 1), 08111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eSpray Thinner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eHempel’s Thinner 808 (No. 3), 08081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eMaximum Brush Thinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eMaximum Roller Thinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eMaximum Paint-Pad Thinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eFirst Coat When Used as Primer\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eMaximum 10% Thinning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eTopcoat System\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eApply 2–3 Coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eBare Surface Preparation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003ePrepare According to Hempel’s Primer Instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003ePreviously Coated Surface Preparation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eAbrade, Clean and Dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eGeneral Cleaning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eRemove Oil, Grease and Contaminants with Suitable Detergent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eSanding Between Coats\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eRecommended for a Smooth Finish; Remove Dust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eApplication Surface Temperature\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eAt Least 3°C Above the Dew Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eMaximum Relative Humidity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eBelow 85% During Drying and Curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eRecommended Previous Coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eHempel’s Primer Undercoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eRecommended Subsequent Coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eTouch Dry at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e6 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eTouch Dry at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e3 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eReady to Sand at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e24 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eOvercoating Interval at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eMinimum 16 Hours; Maximum 5½ Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eOvercoating Interval at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eMinimum 8 Hours; Maximum 72 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eMaximum Interval Exceeded\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eRoughen Surface Before Overcoating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eFlash Point\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e39°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eEU VOC Content\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e440g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eShelf Life at 25°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e60 Months in Original Unopened Containers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eMinimum Storage Temperature\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003e5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 35.5993%;\"\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 64.4007%;\"\u003eDry, Shaded, Cool and Well Ventilated; Protect from Direct Sunlight, Rain and Snow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Hempel Blakes","offers":[{"title":"750ml \/ Black","offer_id":46501148229909,"sku":"MA-H51120-19990-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Light Blue","offer_id":46501148262677,"sku":"MA-H51120-33390-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Light Grey","offer_id":46501148295445,"sku":"MA-H51120-19500-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Mid Grey","offer_id":46501148328213,"sku":"MA-H51120-11480-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Navy Blue","offer_id":46501148360981,"sku":"MA-H51120-30100-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Pale Cream","offer_id":46501148393749,"sku":"MA-H51120-22210-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Pillarbox Red","offer_id":46501148426517,"sku":"MA-H51120-50800-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ White","offer_id":46501148459285,"sku":"MA-H51120-10000-750ML","price":20.98,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Black","offer_id":56538255065465,"sku":"MA-H51120-19990-2.5L","price":52.98,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ White","offer_id":56538255098233,"sku":"MA-H51120-10000-2.5L","price":52.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/Multicoat-black.jpg?v=1704892025"},{"product_id":"hempel-silic-one-topcoat-paint","title":"Hempel Silic One Topcoat Paint","description":"\u003cp\u003e\u003cstrong\u003eHempel’s Silic One 77450\u003c\/strong\u003e is a biocide-free, high-solids fouling-release topcoat for glass fibre (GRP), steel, aluminium and plywood boats below the waterline. Its silicone and hydrogel technology creates a smooth, low-friction surface that makes it difficult for fouling organisms to attach and easier for growth to release when the boat is in motion. The theoretical spreading rate is 10m²\/L at the recommended 80µm dry film thickness.\u003c\/p\u003e\n\u003cp\u003eHempel’s Silic One is the final topcoat within Hempel’s multi-stage Silic One system. It must be applied over Hempel’s Silic One Tiecoat and must not be applied directly to a bare hull, Hempel’s Light Primer or Hempel’s Conversion Primer. The correct system order is primer, Silic One Tiecoat, then Silic One.\u003c\/p\u003e\n\u003cp\u003eHempel states a service life of two years on the hull when the system is correctly applied and maintained. For the initial application, two coats of Silic One are required. Seasonal maintenance can be completed with one full Silic One recoat every two years, or with Hempel’s Infinity recharger for an additional season where the existing silicone coating remains in suitable condition.\u003c\/p\u003e\n\u003ch4\u003eSuitable Substrates and Intended Use\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eGlass fibre (GRP)\u003c\/li\u003e\n\u003cli\u003eSteel\u003c\/li\u003e\n\u003cli\u003eAluminium\u003c\/li\u003e\n\u003cli\u003ePlywood\u003c\/li\u003e\n\u003cli\u003eMarine hulls and propellers\u003c\/li\u003e\n\u003cli\u003eExterior areas below the waterline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe current Hempel Product Data Sheet specifically lists glass fibre, steel, aluminium and plywood. It does not support the broader description “all substrates except wood”; solid timber is not listed, while plywood is explicitly included.\u003c\/p\u003e\n\u003ch4\u003eRequired Silic One System\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eFor a boat without antifouling:\u003c\/strong\u003e clean the surface with a suitable detergent, abrade with dry P120 abrasive paper, clean with fresh water and allow it to dry. Apply the specified Hempel Light Primer system, followed by one complete coat of Hempel’s Silic One Tiecoat and two coats of Hempel’s Silic One. New gelcoat must be epoxy primed to a minimum 300µm dry film thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor sound existing antifouling:\u003c\/strong\u003e remove loose or brittle material, abrade the remaining coating, rinse carefully with fresh water and allow it to dry. Apply Hempel’s Conversion Primer, followed by one complete coat of Hempel’s Silic One Tiecoat and two coats of Hempel’s Silic One.\u003c\/p\u003e\n\u003cp\u003eWhere the existing coating system is damaged or incompatible, remove it back to a sound substrate or suitable two-component primer and rebuild the Hempel system specified for that substrate.\u003c\/p\u003e\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\u003cp\u003eStir well before use. Apply by brush or short-haired or felt roller using soft, even strokes. Fully load the application tool and apply the maximum specified film thickness without creating runs or sagging. Pour the paint into a tray and replace the lid during application because the product is sensitive to humidity.\u003c\/p\u003e\n\u003cp\u003eDo not thin Hempel’s Silic One. Hempel’s Thinner 808, product code 08081, is specified for cleaning tools only. Pot life is approximately 60 minutes at 20°C, and Hempel advises using an opened tin within one hour rather than storing it for later use.\u003c\/p\u003e\n\u003cp\u003eThe surface temperature must remain above 10°C during application and curing. Relative humidity must remain between 30% and 85%. Avoid application where rain is expected, provide adequate ventilation and prevent condensation on the freshly applied coating.\u003c\/p\u003e\n\u003ch4\u003eFilm Thickness and Coverage\u003c\/h4\u003e\n\u003cp\u003eThe recommended dry film thickness is 80µm and the corresponding wet film thickness is 102µm. The theoretical spreading rate is 10m²\/L. This equals approximately 3.75m² per 375ml tin or 7.5m² per 750ml tin under theoretical conditions. Practical coverage will be lower where surface profile, hull shape and application losses increase consumption.\u003c\/p\u003e\n\u003ch4\u003eOvercoating and Immersion\u003c\/h4\u003e\n\u003cp\u003eApply Hempel’s Silic One Tiecoat over Hempel’s Light Primer or Conversion Primer within 4–8 hours at 10°C, 2–4 hours at 20°C or 1–2 hours at 30°C. Apply the first Silic One coat over the Tiecoat within 16–48 hours at 10°C, 8–48 hours at 20°C or 4–24 hours at 30°C. If the maximum Tiecoat interval is exceeded, apply a fresh Tiecoat before continuing.\u003c\/p\u003e\n\u003cp\u003eFor the second Silic One coat during the initial application, Hempel’s 2026 system guide gives minimum intervals of 16 hours at 10°C, 16 hours at 20°C and 8 hours at 30°C, with no stated maximum. If more than 48 hours has elapsed, clean with a suitable detergent, rinse with fresh water, allow the surface to dry and overcoat as soon as possible.\u003c\/p\u003e\n\u003cp\u003eThe November 2025 Product Data Sheet lists a 16-hour minimum self-overcoating interval at all three temperatures, while the 2026 system guide lists eight hours at 30°C. Follow the current label, project specification or application instructions supplied with the product where the documents differ.\u003c\/p\u003e\n\u003cp\u003eAfter the final coat, allow at least 36 hours before immersion at 10°C or 24 hours at 20°C and 30°C. Launch within one month.\u003c\/p\u003e\n\u003ch4\u003eCleaning, Maintenance and Repair\u003c\/h4\u003e\n\u003cp\u003eHigh-speed motor boats can benefit from self-cleaning while under way. Slow-speed boats and sailing boats may require manual cleaning to keep the surface free from fouling and maintain low friction. Use a dense sponge or cloth followed by a fresh-water rinse, or pressure wash with fresh water at no more than 200 bar. Do not use a hard brush, stiff bristles or similarly aggressive tools.\u003c\/p\u003e\n\u003cp\u003eFor seasonal maintenance, clean with a soft sponge and soap, rinse with fresh water and allow the surface to dry. Apply one full coat of Silic One to the entire underwater area when recoating. If minor damage exposes the yellow Tiecoat, apply one Silic One coat over an area slightly larger than the damage. Deeper damage requires the affected primer, Tiecoat and topcoat stages to be rebuilt.\u003c\/p\u003e\n\u003cp\u003eTraditional antifouling will not adhere directly to Silic One. Remove the silicone system before changing back to a conventional antifouling coating.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOfficial Hempel product code 77450\u003c\/li\u003e\n\u003cli\u003eBiocide-free, high-solids fouling-release topcoat\u003c\/li\u003e\n\u003cli\u003eSilicone and hydrogel technology\u003c\/li\u003e\n\u003cli\u003eSmooth, glossy, low-friction coating surface\u003c\/li\u003e\n\u003cli\u003eSuitable for glass fibre, steel, aluminium and plywood\u003c\/li\u003e\n\u003cli\u003eSuitable for hulls and propellers\u003c\/li\u003e\n\u003cli\u003eFor exterior use below the waterline\u003c\/li\u003e\n\u003cli\u003eMust be applied over Hempel’s Silic One Tiecoat\u003c\/li\u003e\n\u003cli\u003eCompatible system primers: Hempel’s Light Primer or Conversion Primer\u003c\/li\u003e\n\u003cli\u003eTwo Silic One coats required for initial application\u003c\/li\u003e\n\u003cli\u003eOne full Silic One recoat every two years for routine system maintenance\u003c\/li\u003e\n\u003cli\u003eHempel’s Infinity may be used as an alternative seasonal recharge where suitable\u003c\/li\u003e\n\u003cli\u003eStandard Product Data Sheet shade: Jet Black \/ Black 19990\u003c\/li\u003e\n\u003cli\u003eAdditional current UK options: Red 59151 and True Blue 30390\u003c\/li\u003e\n\u003cli\u003eGlossy finish\u003c\/li\u003e\n\u003cli\u003eVolume solids: 78 ± 2%\u003c\/li\u003e\n\u003cli\u003eSpecific gravity: 1kg\/L\u003c\/li\u003e\n\u003cli\u003eRecommended dry film thickness: 80µm\u003c\/li\u003e\n\u003cli\u003eRecommended wet film thickness: 102µm\u003c\/li\u003e\n\u003cli\u003eTheoretical spreading rate: 10m²\/L\u003c\/li\u003e\n\u003cli\u003eApply by brush or short-haired or felt roller\u003c\/li\u003e\n\u003cli\u003eNo thinning permitted\u003c\/li\u003e\n\u003cli\u003eTool cleaner: Hempel’s Thinner 808, 08081\u003c\/li\u003e\n\u003cli\u003ePot life: approximately 60 minutes at 20°C\u003c\/li\u003e\n\u003cli\u003eHard dry in approximately two hours at 20°C\u003c\/li\u003e\n\u003cli\u003eFully cured in approximately three days at 20°C\u003c\/li\u003e\n\u003cli\u003eMinimum immersion time: 24 hours at 20°C\u003c\/li\u003e\n\u003cli\u003eMaximum time before immersion: one month\u003c\/li\u003e\n\u003cli\u003eFlash point: 47°C\u003c\/li\u003e\n\u003cli\u003eEU VOC content: 117g\/L; value may vary by shade\u003c\/li\u003e\n\u003cli\u003eShelf life: 18 months at 25°C in original unopened containers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Hempel’s Silic One 77450?\u003c\/strong\u003e\u003cbr\u003eIt is the biocide-free fouling-release topcoat in Hempel’s Silic One system. Silicone and hydrogel technology create a smooth, low-friction surface that reduces the ability of fouling organisms to attach firmly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Silic One the Tiecoat?\u003c\/strong\u003e\u003cbr\u003eNo. Hempel’s Silic One 77450 is the final fouling-release topcoat. Hempel’s Silic One Tiecoat 27450 is a separate intermediate product applied between Light Primer or Conversion Primer and Silic One.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Silic One be applied directly over Light Primer?\u003c\/strong\u003e\u003cbr\u003eNo. The correct sequence is Hempel’s Light Primer or Conversion Primer, then Hempel’s Silic One Tiecoat, then Hempel’s Silic One.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be applied directly to bare GRP, steel, aluminium or plywood?\u003c\/strong\u003e\u003cbr\u003eNo. The Product Data Sheet states that it is not for uncoated surfaces. Prepare and prime the substrate with the specified Hempel primer system before applying Silic One Tiecoat and Silic One.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich substrates are suitable?\u003c\/strong\u003e\u003cbr\u003eHempel specifies glass fibre, steel, aluminium and plywood below the waterline. Solid timber is not listed in the current Product Data Sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Hempel Silic One copper-free?\u003c\/strong\u003e\u003cbr\u003eThe current Hempel Product Data Sheet verifies that Silic One is biocide-free, but it does not separately state a copper-free claim. The verified product wording should therefore use “biocide-free”.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats are required?\u003c\/strong\u003e\u003cbr\u003eApply two coats when installing Silic One for the first time. For routine full maintenance, Hempel specifies one Silic One coat every two years, subject to the condition and operating environment of the existing system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much area does one litre cover?\u003c\/strong\u003e\u003cbr\u003eThe theoretical spreading rate is 10m²\/L at 80µm dry film thickness. A 375ml tin covers approximately 3.75m² and a 750ml tin approximately 7.5m² theoretically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan Hempel Silic One be thinned?\u003c\/strong\u003e\u003cbr\u003eNo. Thinning is not permitted. Use Hempel’s Thinner 808, product code 08081, for cleaning tools only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long can an opened tin be used?\u003c\/strong\u003e\u003cbr\u003eThe pot life is approximately 60 minutes at 20°C. Hempel advises opening the tin immediately before use, using it within one hour and not storing an opened tin for later application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does Silic One take to dry?\u003c\/strong\u003e\u003cbr\u003eAt the recommended film thickness, it is hard dry in approximately four hours at 10°C, two hours at 20°C or one hour at 30°C. Full cure is approximately five, three or two days respectively.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can the boat be launched?\u003c\/strong\u003e\u003cbr\u003eWait at least 36 hours after the final coat at 10°C or 24 hours at 20°C and 30°C. Launch within one month.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Silic One self-clean at low speed?\u003c\/strong\u003e\u003cbr\u003eSelf-cleaning is most effective at higher speed. Hempel states that it can also occur at lower speed with constant use, but slow-speed boats and sailing boats may require regular gentle cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan a clean Silic One coating reduce drag?\u003c\/strong\u003e\u003cbr\u003eHempel states that keeping the surface free from fouling reduces friction, which can support increased speed and lower fuel or energy use compared with a fouled hull. Actual results depend on the vessel, operating profile and condition of the coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the coating be cleaned?\u003c\/strong\u003e\u003cbr\u003eUse a dense sponge or cloth and rinse with fresh water, or use a fresh-water pressure washer at no more than 200 bar. Do not use hard brushes or stiff bristles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan traditional antifouling be applied over Silic One?\u003c\/strong\u003e\u003cbr\u003eNo. Conventional antifouling will not adhere directly to the silicone surface. Remove the Silic One system before changing to a traditional antifouling coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is damaged Silic One repaired?\u003c\/strong\u003e\u003cbr\u003eIf only the black, red or blue topcoat is damaged and the yellow Tiecoat remains visible, apply one Silic One coat over an area slightly larger than the damage. If the damage penetrates deeper, rebuild the required primer, Tiecoat and topcoat stages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat maintenance choices are available after the first application?\u003c\/strong\u003e\u003cbr\u003eHempel specifies either a full one-coat Silic One reapplication every two years or a Hempel’s Infinity recharge for an additional season where the existing system is in good condition. More frequent maintenance may be needed in severe fouling conditions or after prolonged storage ashore.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the product be stored?\u003c\/strong\u003e\u003cbr\u003eStore unopened tins at a minimum of 5°C in a dry, shaded, cool and well-ventilated place, protected from direct sunlight, rain, snow, heat and ignition sources. Keep containers tightly closed.\u003c\/p\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 33.6315%;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 66.3685%;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eProduct Name\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel’s Silic One\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eHempel Product Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e77450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eProduct Category\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eBiocide-Free Fouling-Release Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSystem Position\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eFinal Topcoat Applied over Hempel’s Silic One Tiecoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTechnology\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eSilicone with Hydrogel Micro-Layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eBiocide-Free\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSuitable Substrates\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eGlass Fibre (GRP), Steel, Aluminium and Plywood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSolid Timber Suitability\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eNot Listed in the Current Product Data Sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eApplication Area\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eExterior, Below the Waterline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSuitable Components\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHull and Propellers within the Specified System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePrevious Coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel’s Silic One Tiecoat 27450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eDirect-to-Bare-Substrate Application\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eNot Permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eNew \/ Bare System\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eLight Primer, Silic One Tiecoat, Then 2 Coats of Silic One\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSound Existing Antifouling System\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eConversion Primer, Silic One Tiecoat, Then 2 Coats of Silic One\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eNew Gelcoat Primer Requirement\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eEpoxy Prime to a Minimum 300µm Dry Film Thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eInitial Silic One Coats\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e2 Coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eRoutine Full Recoat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e1 Coat Every 2 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eAlternative Seasonal Maintenance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel’s Infinity Recharge Where the Existing System Is in Suitable Condition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eStated Hull Service Life\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e2 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eStandard Product Data Sheet Shade \/ Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eJet Black \/ Black 19990\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eGlossy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eVolume Solids\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e78 ± 2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSpecific Gravity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e1kg\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eRecommended Dry Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e80µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eRecommended Wet Film Thickness\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e102µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTheoretical Spreading Rate\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e10m²\/L at 80µm DFT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePack Size\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e375ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eCalculated Theoretical Coverage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eApproximately 3.75m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePack Size\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e750ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eCalculated Theoretical Coverage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eApproximately 7.5m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eApplication Method\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eBrush or Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eRecommended Roller\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eShort-Haired or Felt Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eThinning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eNot Permitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTool Cleaner\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eHempel’s Thinner 808, 08081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePot Life at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e60 Minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eOpened Tin Guidance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eOpen Immediately Before Use; Use within 1 Hour; Do Not Store for Later Use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eMinimum Surface Temperature\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eAbove 10°C During Application and Curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e30–85% During Application and Curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eWeather Restriction\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eAvoid Application Where Rain Is Expected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePrimer to Tiecoat at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eMinimum 4 Hours; Maximum 8 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePrimer to Tiecoat at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eMinimum 2 Hours; Maximum 4 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePrimer to Tiecoat at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eMinimum 1 Hour; Maximum 2 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTiecoat to First Silic One Coat at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eMinimum 16 Hours; Maximum 48 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTiecoat to First Silic One Coat at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eMinimum 8 Hours; Maximum 48 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTiecoat to First Silic One Coat at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eMinimum 4 Hours; Maximum 24 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTiecoat Interval Exceeded\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eApply a Fresh Coat of Silic One Tiecoat Before Continuing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFirst to Second Silic One Coat at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eMinimum 16 Hours; No Maximum Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFirst to Second Silic One Coat at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eMinimum 16 Hours; No Maximum Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFirst to Second Silic One Coat at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e2026 Guide: Minimum 8 Hours; November 2025 PDS: Minimum 16 Hours; Follow Current Supplied Instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eSelf-Overcoating after 48 Hours\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eDetergent Clean, Fresh-Water Rinse, Dry and Overcoat as Soon as Possible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eHard Dry at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e4 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eHard Dry at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e2 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eHard Dry at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e1 Hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFully Cured at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e5 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFully Cured at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e3 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFully Cured at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e2 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eMinimum Immersion Time at 10°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e36 Hours after Final Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eMinimum Immersion Time at 20°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e24 Hours after Final Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eMinimum Immersion Time at 30°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e24 Hours after Final Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eMaximum Time Before Immersion\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e1 Month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eGeneral Cleaning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eDense Sponge or Cloth and Fresh-Water Rinse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003ePressure Washing\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eFresh Water, Maximum 200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eCleaning Restriction\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eDo Not Use a Hard Brush, Stiff Bristles or Similar Tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eTraditional Antifouling Compatibility\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eRemove Silic One Before Converting to Traditional Antifouling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eMinor Topcoat Damage\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eApply 1 Silic One Coat over an Area Slightly Larger than the Damage Where Yellow Tiecoat Remains Visible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eFlash Point\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e47°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eEU VOC Content\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e117g\/L; Value May Vary by Shade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eShelf Life at 25°C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e18 Months in Original Unopened Containers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eMinimum Storage Temperature\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003e5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 33.6315%;\"\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 66.3685%;\"\u003eDry, Shaded, Cool and Well Ventilated; Protect from Sunlight, Rain, Snow, Heat and Ignition Sources\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Hempel Blakes","offers":[{"title":"375ml \/ Black","offer_id":56564091421049,"sku":"MA-H77450-19990-375ML","price":24.95,"currency_code":"GBP","in_stock":false},{"title":"750ml \/ Black","offer_id":46501150687509,"sku":"MA-H77450-19990-750ML","price":38.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Red","offer_id":46501150720277,"sku":"MA-H77450-59151-750ML","price":38.98,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ True Blue","offer_id":46501150753045,"sku":"MA-H77450-30390-750ML","price":38.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/hempel-silic-one-biocide-free-antifouling.jpg?v=1695911848"},{"product_id":"international-matting-additive-free-boat-paint-guide-af-5-60500","title":"International Matting Additive For One Pack Finishes \u0026 Varnishes - 750ml","description":"\u003cp\u003eTransform your International Paint finishes and varnishes with customizable gloss control. This versatile matting additive lets you dial in the perfect finish, from glossy to satin to completely flat, by adjusting the mix ratio. \u003c\/p\u003e\n\u003cp\u003eBlend 1:1 with Toplac for a satin effect comparable to Goldspar, or go up to 25:75 for a deep matt appearance. Whether you're seeking subtle sophistication or bold matte character, this 750ml additive gives you the creative freedom to achieve professional results that truly elevate your paintwork.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor interior and exterior use.\u003c\/li\u003e\n\u003cli\u003eCreates a variety of gloss, satin or matt effects\u003c\/li\u003e\n\u003cli\u003eSuitable to add to one pack finishes and varnishes\u003c\/li\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003e25% addition of the Matting Additive by volume to achieve up to a 30% reduction in gloss\u003c\/li\u003e\n\u003cli\u003e50% addition of the Matting Additive by volume to achieve up to a 80% reduction in gloss\u003c\/li\u003e\n\u003cli\u003e75% addition of the Matting Additive by volume to achieve up to a 95% reduction in gloss\u003c\/li\u003e\n\u003cli\u003eThinners:  International Thinners No 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/specialtycoatings.brand.akzonobel.com\/m\/57b8f2441f27d0c6\/original\/Matting_Additive_eng_A4_20170727.pdf\" target=\"_blank\" title=\"International Matting Additive Data Sheet\" rel=\"noopener\"\u003eProduct Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/prdakzopreloadersa.blob.core.windows.net\/public\/A6FD275CC10B1EEF8B98C61A19B31CAC\/YY_GB_EN_YMA715_MATTING_ADDITIVE.pdf\" target=\"_blank\" title=\"International Matting Additive Safety Data Sheet\" rel=\"noopener\"\u003eSafety Information Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"International","offers":[{"title":"Default Title","offer_id":46501230444821,"sku":"BR-IPYMA715750AA","price":24.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/5-60524.jpg?v=1706010206"},{"product_id":"international-non-slip-additive-granuals-20g","title":"International Non-Slip Additive For Finishes \u0026 Varnishes - 20g","description":"\u003ch2\u003eInternational Non-Slip Additive for Marine Paint\u003c\/h2\u003e\n\u003cp\u003eInternational Non-Slip Additive for Marine Paint is a synthetic non-slip additive designed to create a slip-resistant finish on painted marine surfaces. It is formulated for use with International Paint topcoat systems, including Toplac and Perfection, and is suitable for decks, cockpit soles, steps, companionways and other painted walking surfaces where extra grip is required.\u003c\/p\u003e\n\u003cp\u003eThe virtually colourless granular formula helps preserve the selected paint colour while adding surface texture. Intergrip can be mixed directly into compatible paint before application or sprinkled evenly onto wet paint to create a non-slip finish.\u003c\/p\u003e\n\u003ch3\u003eWhat is International Non-Slip Additive for Marine Paint used for?\u003c\/h3\u003e\n\u003cp\u003eInternational Non-Slip Additive for Marine Paint is used to add non-slip texture to compatible marine paints and varnishes, helping create safer walking surfaces on boats and other painted areas exposed to foot traffic.\u003c\/p\u003e\n\u003ch3\u003eCompatible Paint Systems\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInternational Toplac\u003c\/li\u003e\n\u003cli\u003eInternational Perfection\u003c\/li\u003e\n\u003cli\u003eCompatible International Paint topcoat finishes and varnishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCreates a non-slip surface finish when added to or sprinkled onto paint\u003c\/li\u003e\n\u003cli\u003eDesigned for use with International Toplac and International Perfection\u003c\/li\u003e\n\u003cli\u003eSynthetic granular formula remains virtually colourless\u003c\/li\u003e\n\u003cli\u003eHelps maintain the appearance of the selected paint colour\u003c\/li\u003e\n\u003cli\u003eDoes not affect normal paint drying times\u003c\/li\u003e\n\u003cli\u003eAllows compatible finishes to be applied as normal\u003c\/li\u003e\n\u003cli\u003eSuitable for marine decks, steps, cockpit areas and other painted walking surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMix Intergrip into Toplac or Perfection before application, or sprinkle directly onto wet paint.\u003c\/li\u003e\n\u003cli\u003eUse 1 sachet for each 750ml of paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\" class=\"spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 27.5492%;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 72.4508%;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eInternational\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eProduct Category\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eNon-Slip Paint Additive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eFormula Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eSynthetic Granular Additive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eCompatible Paints\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eInternational Toplac, International Perfection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eCompatible Finish Types\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eTopcoat Finishes and Varnishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eApplication Method\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eMix into paint or sprinkle onto wet paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eFinish Effect\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eCreates a Non-Slip Surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eColour\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eVirtually Colourless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eDrying Time Effect\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eDoes Not Affect Normal Drying Times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eMixing Ratio\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003e1 Sachet per 750ml of Paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 27.5492%;\"\u003eTypical Uses\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 72.4508%;\"\u003eDecks, Steps, Cockpit Soles, Companionways and Painted Walking Surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"International","offers":[{"title":"Default Title","offer_id":46501231755541,"sku":"BR-IPYMA9051EA","price":6.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/s-l500_6e0c3b62-b69d-4f81-acc2-d19a3210378e.webp?v=1756303807"},{"product_id":"international-danboline-bilge-and-locker-paint","title":"International Danboline Bilge \u0026 Locker Topcoat Paint","description":"\u003cp\u003eProtect your vessel's interior with International Danboline, a robust topcoat formulated to withstand the harshest marine conditions. This versatile paint adheres to wood, steel, aluminium, and GRP, making it perfect for bilges, lockers, engine rooms, and bulkheads.\u003c\/p\u003e\n\u003cp\u003eThe high-opacity formula delivers exceptional coverage and a striking high-sheen finish that resists moisture, oil, and fuel damage. \u003c\/p\u003e\n\u003cp\u003eBuilt for durability, Danboline maintains its appearance with minimal effort; simply wipe clean and it looks as good as new. Choose the paint that marine professionals trust for long-lasting protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh opacity for excellent covering power\u003c\/li\u003e\n\u003cli\u003eHard wearing\u003c\/li\u003e\n\u003cli\u003eSuitable for glass fibre, wood, aluminium, and steel.\u003c\/li\u003e\n\u003cli\u003eFor added protection against moisture absorption and osmosis in bilges, use Gelshield 200\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eArea: Above the waterline\u003c\/li\u003e\n\u003cli\u003eCoverage: 11m2 Per Litre\u003c\/li\u003e\n\u003cli\u003eThinners:  International Thinners No 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/specialtycoatings.brand.akzonobel.com\/m\/18ee4c37cef30162\/original\/Danboline_eng_A4_20230731.pdf\" title=\"International Danboline Data Sheet\" rel=\"noopener\" target=\"_blank\"\u003eProduct Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/prdakzopreloadersa.blob.core.windows.net\/public\/4E8F22E7220C1EEF8EBFD945D907147D\/YY_GB_EN_YMA100_DANBOLINE_GREY_YMA100_750AA_GREY.pdf\" title=\"International Danboline Safety Data Sheet\" rel=\"noopener\" target=\"_blank\"\u003eSafety Information Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"International","offers":[{"title":"750ml \/ Grey","offer_id":46501244338453,"sku":"BR-IPYMA100750EU","price":25.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ White","offer_id":46501244371221,"sku":"BR-IPYMA102750EU","price":25.95,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Grey","offer_id":55673138676089,"sku":"BR-IPYMA1002.5EU","price":65.99,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ White","offer_id":55673138708857,"sku":"BR-IPYMA1022.5EU","price":65.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/danboline.jpg?v=1758116647"},{"product_id":"international-interdeck-non-slip-deck-paint","title":"International Interdeck Non Slip Deck Paint","description":"\u003cp\u003eKeep your deck safe and protected with International Interdeck, a premium slip-resistant polyurethane paint formulated for demanding marine environments. Mineral-reinforced technology bonds to any substrate, delivering a hard-wearing surface that resists foot traffic and weathering.\u003c\/p\u003e\n\u003cp\u003eThe low sheen finish eliminates harsh glare whilst maintaining visual appeal, no primer needed, just brush or roll straight from the tin. \u003c\/p\u003e\n\u003cp\u003eAvailable in multiple colours, Interdeck combines practical safety with lasting durability, giving you peace of mind on every voyage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlip-resistant deck paint that’s suitable for all substrates\u003c\/li\u003e\n\u003cli\u003eContains fine mineral additive for hard wearing, non-slip surface\u003c\/li\u003e\n\u003cli\u003eLow sheen finish prevents sunlight dazzle\u003c\/li\u003e\n\u003cli\u003eArea: Above the waterline\u003c\/li\u003e\n\u003cli\u003eFinish: Low sheen\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo. of coats: 1-2\u003c\/li\u003e\n\u003cli\u003eSubstrates: GRP, Wood*, Steel*, Aluminium* (*over suitable primers)\u003c\/li\u003e\n\u003cli\u003eApplication: Brush, roller\u003c\/li\u003e\n\u003cli\u003eCoverage: 9.5m2 Per Litre\u003c\/li\u003e\n\u003cli\u003eThinners:  International Thinners No 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/specialtycoatings.brand.akzonobel.com\/m\/464b10a08bad9957\/original\/Interdeck_eng_A4_20240620.pdf\" target=\"_blank\" title=\"International Interdeck Data Sheet\" rel=\"noopener\"\u003eProduct Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/prdakzopreloadersa.blob.core.windows.net\/public\/7395EE25AE731FE0B6CEFA2649E809A1\/YY_GB_EN_YJB000_INTERDECK_WHITE.pdf\" target=\"_blank\" title=\"International Interdeck Safety Data Sheet\" rel=\"noopener\"\u003eSafety Information Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"International","offers":[{"title":"Cream","offer_id":46501246992661,"sku":"BR-IPYJC089750AA","price":28.5,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":46501247025429,"sku":"BR-IPYJF684750EU","price":28.5,"currency_code":"GBP","in_stock":true},{"title":"Sand Beige","offer_id":46501247058197,"sku":"BR-IPYJG009750EU","price":28.5,"currency_code":"GBP","in_stock":true},{"title":"Squall Blue","offer_id":46501247090965,"sku":"BR-IPYJB923750EU","price":28.5,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":46501247123733,"sku":"BR-IPYJB000750AA","price":28.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/International-Interdeck.jpg?v=1706005954"},{"product_id":"international-super-gloss-hs-topcoat-paint-750ml","title":"International Super Gloss HS Topcoat Paint - 750ml","description":"\u003cp\u003eInternational Super Gloss HS is a premium yacht topcoat that combines high-solids resin technology with low-VOC formulation to deliver a stunning gloss finish with minimal environmental impact. Engineered for effortless roller application, Super Gloss HS achieves full coverage in just one or two coats; even in cooler conditions. \u003c\/p\u003e\n\u003cp\u003eThe reduced solvent content cuts odour and emissions while maintaining exceptional durability and performance. Skip the tipping-off process and enjoy a professional-grade, high-gloss topside finish without the labour-intensive techniques traditional paints demand.\u003c\/p\u003e\n\u003cp\u003eIdeal for boat owners seeking superior results with less effort and lower environmental footprint.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA one part high gloss finish designed for roller application\u003c\/li\u003e\n\u003cli\u003eEasy to apply with a roller or a brush\u003c\/li\u003e\n\u003cli\u003eApply by roller without the need for tipping off\u003c\/li\u003e\n\u003cli\u003eHigh solid resin technology\u003c\/li\u003e\n\u003cli\u003eLow VOC formula for low level emissions\u003c\/li\u003e\n\u003cli\u003eMore paint and less solvent for reduced odour and emissions\u003c\/li\u003e\n\u003cli\u003eGreat temperature tolerances\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires 1 to 3 coats, level of opacity dependant on the paint colour or substrate being painted\u003c\/li\u003e\n\u003cli\u003eCoverage: 12m2 Per Litre\u003c\/li\u003e\n\u003cli\u003eThinners:  International Thinners No 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/specialtycoatings.brand.akzonobel.com\/m\/1401d89b8b54c4a4\/original\/Super_Gloss_HS_eng_A4_20211109.pdf\" target=\"_blank\" title=\"International Super Gloss HS Data Sheet\" rel=\"noopener\"\u003eProduct Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/prdakzopreloadersa.blob.core.windows.net\/public\/C9158E3CECB71FD080FAF5E571B291CB\/YY_GB_EN_YFA100_SUPER_GLOSS_HS_WHITE.pdf\" target=\"_blank\" title=\"International Super Gloss HS Safety Data Sheet\" rel=\"noopener\"\u003eSafety Information Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable class=\"sales-table body-copy-rg\" height=\"271\" style=\"width: 60.5357%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 59.2058%;\"\u003eColour\u003c\/th\u003e\n\u003cth style=\"width: 40.4332%;\"\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eWhite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eBlack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eWhale Grey\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eOcean Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eLighthouse Red\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA233\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eThames Green\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA239\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eBahama Beige\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA243\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eArctic White\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA248\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003ePearl White\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA253\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.2058%;\"\u003e\u003cstrong\u003eAtlantic Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.4332%;\"\u003eYFA269\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"International","offers":[{"title":"Arctic White","offer_id":46501248991509,"sku":"BR-IPYFA248750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Atlantic Blue","offer_id":46501249024277,"sku":"BR-IPYFA269750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Bahama Beige","offer_id":46501249057045,"sku":"BR-IPYFA243750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":46501249089813,"sku":"BR-IPYFA190750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Lighthouse Red","offer_id":46501249122581,"sku":"BR-IPYFA233750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Mist Grey","offer_id":55741157540217,"sku":"BR-IPYFA216750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Ocean Blue","offer_id":46501249155349,"sku":"BR-IPYFA210750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Pacific Blue","offer_id":55741157572985,"sku":"BR-IPYFA208750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Pearl White","offer_id":46501249220885,"sku":"BR-IPYFA253750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Thames Green","offer_id":46501249253653,"sku":"BR-IPYFA239750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Storm Grey","offer_id":55741157605753,"sku":"BR-IPYFA224750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"Whale Grey","offer_id":46501249286421,"sku":"BR-IPYFA201750AZUK","price":23.5,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":46501249319189,"sku":"BR-IPYFA100750AZUK","price":23.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/plyfa-international-super-gloss-800.jpg?v=1756982533"},{"product_id":"international-toplac-plus-gloss-topcoat-paint","title":"International Toplac Plus Topcoat Paint","description":"\u003cp\u003eInternational Toplac Plus delivers professional-grade protection and finish for above-waterline surfaces on any vessel. This silicone alkyd enamel combines exceptional gloss with UV-resistant durability, resisting fading and weathering season after season.\u003c\/p\u003e\n\u003cp\u003eThe advanced formulation flows and levels effortlessly, apply by brush or roller without tipping for a flawless result every time. Whether you're a seasoned professional or hands-on boat owner, Toplac Plus simplifies your maintenance routine. Pair it with One UP primer for a complete two-step system that outperforms traditional multi-coat approaches, saving time and delivering superior protection that keeps your boat looking pristine.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved aesthetics over Toplac in terms of Distinction Of Image (DOI) and flow\u003c\/li\u003e\n\u003cli\u003eThe new formula eliminates the need for tipping when using a roller\u003c\/li\u003e\n\u003cli\u003eImproved gloss retention over time\u003c\/li\u003e\n\u003cli\u003eContains UV filters for increased durability\u003c\/li\u003e\n\u003cli\u003eMEKO free\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExcellent gloss levels\u003c\/li\u003e\n\u003cli\u003eSuitable for above the waterline: Hull\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNumber of coats 2-3 coats of 75µm (WFT) Only 1 coat may be required for touch-up\/repair\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTypical shelf life 2 years\u003c\/li\u003e\n\u003cli\u003eSubstrate Suitable for all substrates\u003c\/li\u003e\n\u003cli\u003eCoverage: 12m2 Per Litre\u003c\/li\u003e\n\u003cli\u003eThinners:  International Thinners No 100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/specialtycoatings.brand.akzonobel.com\/m\/7b6d7d05a78a66af\/original\/Toplac_Plus_eng_A4_20231115.pdf\" target=\"_blank\" title=\"International Toplac Plus Data Sheet\" rel=\"noopener\"\u003eProduct Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/prdakzopreloadersa.blob.core.windows.net\/public\/0BC5B267D82E1FD0B7957CB9A9E419B7\/YY_GB_EN_YLK999_TOPLAC_PLUS_JET_BLACK.pdf\" target=\"_blank\" title=\"International Toplac Plus Safety Data Sheet\" rel=\"noopener\"\u003eSafety Information Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable class=\"sales-table body-copy-rg\" height=\"507\" style=\"width: 43.3929%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 66.6065%;\"\u003eColour\u003c\/th\u003e\n\u003cth style=\"width: 33.0325%;\"\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eAtlantic Grey\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK684\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eDonegal Green\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eIvory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK187\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eJet Black\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eMauritius Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK991\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eMediterranean White\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK184\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eOxford Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eRochelle Red\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eSnow White\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eCream\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK027\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003ePlatinum\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK151\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eYellow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eLauderdale Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK936\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eBondi Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK898\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eSapphire Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK830\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eRescue Orange\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK265\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eFire Red\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK504\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eRustic Red\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK501\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eBounty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK292\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eMatterhorn White\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK198\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eFlag Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK990\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 66.6065%;\"\u003e\u003cstrong\u003eOyster White\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33.0325%;\"\u003eYLK194\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"International","offers":[{"title":"750ml \/ Atlantic Grey","offer_id":46501257609493,"sku":"BR-IPYLK684750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Bondi Blue","offer_id":46501257642261,"sku":"BR-IPYLK898750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Bounty Red","offer_id":46501257675029,"sku":"BR-IPYLK292750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Cream","offer_id":46501257707797,"sku":"BR-IPYLK027750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Donegal Green","offer_id":46501257740565,"sku":"BR-IPYLK541750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Fire Red","offer_id":46501257773333,"sku":"BR-IPYLK504750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Flag Blue","offer_id":46501257806101,"sku":"BR-IPYLK990750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Ivory","offer_id":46501257838869,"sku":"BR-IPYLK187750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Jet Black","offer_id":46501257871637,"sku":"BR-IPYLK999750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Lauderdale Blue","offer_id":46501257904405,"sku":"BR-IPYLK936750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Matterhorn White","offer_id":46501257937173,"sku":"BR-IPYLK198750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Mauritius Blue","offer_id":46501257969941,"sku":"BR-IPYLK991750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Mediterranean White","offer_id":46501258002709,"sku":"BR-IPYLK184750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Oxford Blue","offer_id":46501258035477,"sku":"BR-IPYLK993750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Oyster White","offer_id":46501258068245,"sku":"BR-IPYLK194750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Platinum","offer_id":46501258101013,"sku":"BR-IPYLK151750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Rescue Orange","offer_id":46501258133781,"sku":"BR-IPYLK265750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Rochelle Red","offer_id":46501258166549,"sku":"BR-IPYLK299750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Rustic Red","offer_id":46501258199317,"sku":"BR-IPYLK501750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Sapphire Blue","offer_id":46501258232085,"sku":"BR-IPYLK830750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Snow White","offer_id":46501258264853,"sku":"BR-IPYLK000750EU","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Yellow","offer_id":46501258297621,"sku":"BR-IPYLK101750AA","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Mediterranean White","offer_id":55745733001593,"sku":"BR-IPYLK1842.5AA","price":90.95,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Snow White","offer_id":55745733034361,"sku":"BR-IPYLK0002.5AA","price":90.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/products\/Toplac-Plus-Jet-Black-IPYLK999750AA.jpg?v=1695912023"},{"product_id":"polymarine-flexithane-hypalon-inflatable-boat-paint-500ml-ma-53-42-80","title":"Polymarine Flexithane Hypalon Inflatable Boat Paint","description":"\u003cp\u003ePolymarine have formulated a specialist paint called Flexithane for the renovation of inflatable boats made from Hypalon PU and rubber variant fabrics.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFlexithane is matched by Superflex the for same great results on PVC Dinghy Fabrics. Flexithane has excellent adhesion properties and is highly elastomeric with an extreme stretch ratio that will not crack or flake off. Flexithane’s coating properties are highly opaque and normally require only one coat for true colour rendition. A second coat will enhance the smooth satin appearance and improve the lasting durability.\u003c\/p\u003e\n\u003cp\u003eThe Unique Properties of Polymarine Flexithane Paint\u003c\/p\u003e\n\u003cp\u003e*A fully flexible paint formulated for Hypalon PU and rubber variant fabric. *High Adhesion. *Hard Wear and Abrasion Resistance. *Smooth satin finish, will not crack or flake off. *No mixing required, just a vigorous shake or stir. *Apply with a brush, Touch Dry in 5 minutes at 20°C. *Second Coat can be applied when entire surface is Hard Dry in 20 minutes at 20°C. *Full Dry is achieved after 24 hours. *Used for renovating Hypalon inflatable boats and RIBS. *Also used for resealing and preventing rubbing strake and mouldings from powdering. *1 x 500ml Tin is enough to apply two coats of paint on 4 to 5 square metres.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eShake the Paint Tin vigorously prior to application. Add the approximate amount of paint you intend to use in one session to a paint kettle or similar container. Stir the container of paint every few minutes.\u003c\/p\u003e\n\u003cp\u003eBY BRUSH (recommended)\u003c\/p\u003e\n\u003cp\u003eIt is recommended that Flexithane be applied using a good Brush with Natural Bristles. Synthetic Bristles may dissolve due to the solvents present within Flexithane.\u003c\/p\u003e\n\u003cp\u003eROLLERS (not recommended)\u003c\/p\u003e\n\u003cp\u003eUse of Gloss Paint Rollers is not recommended as they’re usually synthetic and prone to breaking down due to solvents, thus spoiling your final finish.\u003c\/p\u003e\n\u003cp\u003eSPRAY PAINTING – Professional use only with appropriate breathing apparatus\u003c\/p\u003e\n\u003cp\u003eSpraying can be done using the Polymarine Flexithane 2681 Thinners, at a mix ratio of 1 Base to a maximum of 15% Thinners. Two spray coats should be applied as a minimum. Refer to SDS for cautionary and safety procedures.\u003c\/p\u003e\n\u003cp\u003eColours:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack (M68)\u003c\/li\u003e\n\u003cli\u003eGrey (P4)\u003c\/li\u003e\n\u003cli\u003eWhite (M86)\u003c\/li\u003e\n\u003cli\u003eOrange (M80)\u003c\/li\u003e\n\u003cli\u003eBlue (J110)\u003c\/li\u003e\n\u003cli\u003eRed (M66)\u003c\/li\u003e\n\u003cli\u003eYellow \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polymarine","offers":[{"title":"White","offer_id":47309773177109,"sku":"MA-53.42.82","price":71.95,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":47309773013269,"sku":"MA-53.42.80","price":71.95,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":47309773078805,"sku":"MA-53.42.81","price":71.95,"currency_code":"GBP","in_stock":true},{"title":"Orange","offer_id":47309773111573,"sku":"MA-53.42.83","price":71.95,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47309773046037,"sku":"MA-53.42.84","price":71.95,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47309773144341,"sku":"MA-53.42.85","price":71.95,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":47309773209877,"sku":"MA-53.42.86","price":71.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/products\/hypaloninflatboatpaint.jpg?v=1696422010"},{"product_id":"polymarine-superflex-pvc-flexible-paint-500ml-ma-53-42-15","title":"Polymarine Superflex PVC Inflatable Boat Paint","description":"\u003cp\u003eA fully flexible paint formulated for renovating PVC and any other PVC variant fabric\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth satin finish, will not crack or flake off\u003c\/li\u003e\n\u003cli\u003eNo mixing required, apply with a brush or gloss roller, touch dry in one hour\u003c\/li\u003e\n\u003cli\u003eSeawater and sunlight resistant\u003c\/li\u003e\n\u003cli\u003eMany uses including hatch covers, PVC fenders, boatcovers, dodgers etc.\u003c\/li\u003e\n\u003cli\u003eSupplied in 500ml containers\u003c\/li\u003e\n\u003cli\u003eCoverage 2.5 sq m per 500ml\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polymarine","offers":[{"title":"Black","offer_id":47309777731861,"sku":"MA-53.42.18","price":70.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47309777764629,"sku":"MA-53.42.16","price":70.99,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":47309777797397,"sku":"MA-53.42.19","price":70.99,"currency_code":"GBP","in_stock":true},{"title":"Midnight Blue","offer_id":47309777830165,"sku":"MA-53.42.23","price":70.99,"currency_code":"GBP","in_stock":true},{"title":"Orange","offer_id":47309777862933,"sku":"MA-53.42.17","price":70.99,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47309777895701,"sku":"MA-53.42.21","price":70.99,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":47309777928469,"sku":"MA-53.42.15","price":70.99,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":47309777961237,"sku":"MA-53.42.20","price":70.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/products\/pvc-flexible-paint-orange2.jpg?v=1696422040"},{"product_id":"tk-colorspray-outboard-engine-marine-spray-paint-evinrude-blue-69-82-af66-40061-1","title":"TK Line Colorspray Engine Spray Paint","description":"\u003cp\u003eA fast-drying, weather resistant spray lacquer perfect for painting and repairs.\u003c\/p\u003e\n\u003cp\u003eThanks to its high resistance to scratching, weathering and temperature, TK Colorspray has quickly become the product of choice for restoring paint on sterns, stern drives, covers and marine engines.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpray paint for engines, fast drying spray lacquer that is fit for painting and repairs.\u003c\/li\u003e\n\u003cli\u003eIt's very weather resistant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinish: Gloss.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePigment: All pigments used are organic, free of heavy metals like Chromium or Lead.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolvent: Nitro-synthetic solvent mixture\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDensity: 1.030 - 1.050 g\/cm3.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eViscosity at 20°C: 28\" - 30\" TF8.70\" - 110\" TF4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolubility: Insoluble in water. Removable with Acetone and\/or nitro solvent.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoverage: With a 400ml can, a coverage of approx. 4m2 can be obtained.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDrying: Fast-drying spray paint. Depending on atmospheric conditions, the dust-dry \u003c\/span\u003e\u003cspan\u003etime varies between 10 \u0026amp; 15 minutes. Complete, thorough drying after 6-8 hours.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TK Line","offers":[{"title":"Aifo Marine Red","offer_id":48398157283605,"sku":"AF-6-40081\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Caterpillar Yellow","offer_id":48398157316373,"sku":"AF-6-40096\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Evinrude Blue 1969-82","offer_id":48398157349141,"sku":"AF-6-40061\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Evinrude Blue XP","offer_id":48398157381909,"sku":"AF-6-40063\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Evinrude Silver 1984","offer_id":48398157414677,"sku":"AF-6-40062\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Honda Grey Metallic","offer_id":48398157447445,"sku":"AF-6-40075\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"G.M \u0026 BMW Silver","offer_id":48398157480213,"sku":"AF-6-40089\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Johnson\/Evinrude White","offer_id":48398157512981,"sku":"AF-6-40055\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Johnson White 1981-83","offer_id":48398157545749,"sku":"AF-6-40056\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Mariner Grey","offer_id":48398157578517,"sku":"AF-6-40053\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Matt Black","offer_id":48398157611285,"sku":"AF-6-40091\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Mercury Black","offer_id":48398157644053,"sku":"AF-6-40052\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Nanni Blue Metallic","offer_id":48398157676821,"sku":"AF-6-40095\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"OMC Red","offer_id":48398157709589,"sku":"AF-6-40049\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Onan Ivory","offer_id":48398157742357,"sku":"AF-6-40084\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Suzuki Black Metallic","offer_id":48398157775125,"sku":"AF-6-40068\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Suzuki Grey","offer_id":48398157807893,"sku":"AF-6-40066\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Suzuki Grey 1989","offer_id":48398157840661,"sku":"AF-6-40067\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Tohatsu Aquamarine Blue","offer_id":48398157873429,"sku":"AF-6-40078\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Tohatsu Grey","offer_id":48398157906197,"sku":"AF-6-40077\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Transparent","offer_id":48398157938965,"sku":"AF-6-40092\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Vetus Yellow","offer_id":48398157971733,"sku":"AF-6-40094\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Volvo Aquamatic","offer_id":48398158004501,"sku":"AF-6-40086\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Volvo Aquamatic 1989","offer_id":48398158037269,"sku":"AF-6-40093\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Volvo Green","offer_id":48398158070037,"sku":"AF-6-40085\/1","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"Volvo Red","offer_id":48398158102805,"sku":"AF-6-40088\/1","price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Volvo SX\/DPX Grey","offer_id":48398158135573,"sku":"AF-6-40082\/1","price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Yamaha Blue 1984","offer_id":48398158168341,"sku":"AF-6-40051\/1","price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Yamaha Dark Grey 1994","offer_id":48398158201109,"sku":"AF-6-40098\/1","price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Yamaha Ocean Blue","offer_id":48398158233877,"sku":"AF-6-40050\/1","price":17.95,"currency_code":"GBP","in_stock":true},{"title":"Yanmar Grey","offer_id":48398158266645,"sku":"AF-6-40083\/1","price":17.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/tk-colorspray-engine-paint-400ml_2db800cd-20f1-4857-a864-bd05479e214a.webp?v=1720013916"},{"product_id":"baileys-fibreglass-flowcoat-topcoat-brilliant-white-250g","title":"Baileys Fibreglass Topcoat \/ Flowcoat - Brilliant White","description":"\u003cp data-mce-fragment=\"1\"\u003eThis Flowcoat is a Lloyds approved coating which provides excellent weathering and water resistance properties to fibreglass. Also known as Topcoat, it is generally used as an all-purpose coating for GRP constructions and maintenance. Flowcoat will air dry rock-hard and tack-free due to the addition of a wax in styrene solution, and requires only 1 coat. Apply the high grade UV stabilised Topcoat using a brush or roller.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis Flowcoat is supplied with MEKP liquid catalyst, which is required for the coating to cure. The mix ratio is 2 parts MEKP hardener to 100 parts Flowcoat.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Flowcoat is applied instead of a Gelcoat, and should be applied in workshop temperatures between 16 - 23°C.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eGel time: less than 15 minutes\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCure time: less than 90 minutes\u003c\/p\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5kg \/ m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApprovals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLloyds approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Baileys","offers":[{"title":"250g","offer_id":48006298075413,"sku":"AF-BA-015","price":19.0,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":57279495831929,"sku":"AF-BA-016","price":23.0,"currency_code":"GBP","in_stock":true},{"title":"1 KG","offer_id":57279495864697,"sku":"AF-BA-017","price":37.99,"currency_code":"GBP","in_stock":true},{"title":"2.5 KG","offer_id":57279495897465,"sku":"AF-BA-018","price":64.0,"currency_code":"GBP","in_stock":true},{"title":"5 KG","offer_id":57279495930233,"sku":"AF-BA-019","price":109.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/BA-015.jpg?v=1708421799"},{"product_id":"baileys-gelcoat-repair-kit-250g-inc-tools","title":"Baileys Gelcoat Repair Kit With Tools 4ft² \/ 250g","description":"\u003cp data-mce-fragment=\"1\"\u003e4 sq ft Fibreglass kit, with premium flowcoat, surface tissue, paint roller and an aluminium bubble remover. Suitable for Caravan, Wood, Boat \u0026amp; Automotive GRP repairs. Bailey Fibreglass's bubble burster paddle roller tools is great for removing air bubbles and speeding up the wetting-out process.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKit includes:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e4 Square Feet Chopped Strand Matting.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e250ml Quality Polyester Resin.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e10g BPO Red Paste Hardener.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1 Sq Yard Glass Fibre Surface Tissue.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePremium Flowcoat Brilliant White 250g.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMEKP Catalyst.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePremium Roller for Flowcoat.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAluminium Bubble Removing Tool (handle colour may vary from image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFull Application Instructions.\u003c\/p\u003e","brand":"Baileys","offers":[{"title":"Default Title","offer_id":48003308388629,"sku":"AF-BA-2604","price":44.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/BA-2604.jpg?v=1708429311"},{"product_id":"baileys-fibreglass-topcoat-flowcoat-black","title":"Baileys Fibreglass Topcoat \/ Flowcoat - Black","description":"\u003cp data-mce-fragment=\"1\"\u003eThis Flowcoat is a Lloyds approved coating which provides excellent weathering and water resistance properties to fibreglass. Also known as Topcoat, it is generally used as an all-purpose coating for GRP constructions and maintenance. Flowcoat will air dry rock-hard and tack-free due to the addition of a wax in styrene solution, and requires only 1 coat. Apply the high grade UV stabilised Topcoat using a brush or roller.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis Flowcoat is supplied with MEKP liquid catalyst, which is required for the coating to cure. The mix ratio is 2 parts MEKP hardener to 100 parts Flowcoat.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Flowcoat is applied instead of a Gelcoat, and should be applied in workshop temperatures between 16 - 23°C.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eGel time: less than 15 minutes\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCure time: less than 90 minutes\u003c\/p\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5kg \/ m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApprovals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLloyds approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Baileys","offers":[{"title":"250g","offer_id":48006424199445,"sku":"AF-BA-7401","price":19.0,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":48006424232213,"sku":"AF-BA-7402","price":23.0,"currency_code":"GBP","in_stock":true},{"title":"1 KG","offer_id":48006424264981,"sku":"AF-BA-7403","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"2.5 KG","offer_id":48006424297749,"sku":"AF-BA-7404","price":54.0,"currency_code":"GBP","in_stock":true},{"title":"5 KG","offer_id":48006424330517,"sku":"AF-BA-7405","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/BA-7401.jpg?v=1708428861"},{"product_id":"ibs-pvc-and-hypalon-inflatable-boat-paint","title":"IBS PVC And Hypalon Inflatable Boat Paint","description":"\u003cdiv id=\"idTab1\" class=\"rte\"\u003e\n\u003cp\u003eAt last, One Paint for Hypalon \u0026amp; PVC Boats.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Paint can be applied directly to the fabric without the need for a primer\u003c\/li\u003e\n\u003cli\u003eA Single Part Paint which has been specifically designed for Hypalon \u0026amp; PVC Inflatables \u0026amp; Ribs\u003c\/li\u003e\n\u003cli\u003eEasy brush on straight from the tin,quick drying, seawater and sunlight resistant\u003c\/li\u003e\n\u003cli\u003eCoverage 6 sq\/m Litre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/usercontent.one\/wp\/ibsparts.co.uk\/wp-content\/uploads\/2024\/04\/IBS-Hypalon-PVC-Paint-MSDS-2024.pdf?media=1727534778\" title=\"Safety Data Sheet\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"IBS Boat Supplies","offers":[{"title":"250ml \/ Black","offer_id":55041902838137,"sku":"IBS-301431","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"250ml \/ Grey","offer_id":57250994356601,"sku":"IBS-301432","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"250ml \/ Orange","offer_id":57250994389369,"sku":"IBS-301433","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"250ml \/ Red","offer_id":57250994422137,"sku":"IBS-301437","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"250ml \/ White","offer_id":57250994454905,"sku":"IBS-301434","price":30.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Black","offer_id":57250994487673,"sku":"IBS-301417","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Grey","offer_id":57250994520441,"sku":"IBS-301418","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Orange","offer_id":57251148038521,"sku":"IBS-301419","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ Red","offer_id":57251150627193,"sku":"IBS-301438","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"750ml \/ White","offer_id":57251151479161,"sku":"IBS-301420","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/products-301417-8-600x450.jpg?v=1744637093"},{"product_id":"crosseven-engine-spray-paint","title":"Crosseven Inboard Engine Spray Paint","description":"\u003cp\u003e\u003cspan\u003eAerosols for repainting inboard engines and accessories. Available in several shades to meet the needs of all engine builders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAerosols for repainting engines and accessories in original colors.\u003c\/p\u003e\n\u003cp\u003eCaution: as the original paint ages, a difference in hue may appear over the years.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum continuous temperature: 90°C\u003c\/li\u003e\n\u003cli\u003e400ml\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" class=\"table3D crossed\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"1\"\u003eMotor manufacturer\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eNanni\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eCaterpillar\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eCummins\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eVolvo\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eVolvo Penta\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003eP205500\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205501\u003c\/td\u003e\n\u003ctd\u003eP205504\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205502\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGRAY ENGINE PETROL 94\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205537\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAqua 72 + Green\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray Metal Embase SX\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205543\u003c\/td\u003e\n\u003ctd\u003eP205542\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Crosseven","offers":[{"title":"Caterpillar White","offer_id":55898147193209,"sku":"MA-P205501","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Caterpillar Yellow","offer_id":55898147225977,"sku":"MA-P205502","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Cummins White","offer_id":55898147258745,"sku":"MA-P205504","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Nanni Blue Metallic","offer_id":55898147586425,"sku":"MA-P205500","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Volvo Grey Metallic 95","offer_id":55898147914105,"sku":"MA-P205537","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Volvo SX\/DPX Grey","offer_id":55898148045177,"sku":"MA-P205541","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Volvo Red","offer_id":55898148012409,"sku":"MA-P205543","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Volvo Penta Green","offer_id":55898147979641,"sku":"MA-P205540","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Volvo Penta Red","offer_id":55898147946873,"sku":"MA-P205542","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/68812dcd5cb26967009581-677764_Spray_Paint_4_1.jpg?v=1759321655"},{"product_id":"crosseven-outboard-engine-spray-paint","title":"Crosseven Outboard Engine Spray Paint","description":"\u003cp\u003e\u003cspan\u003eAerosols for repainting outboard engines and accessories. Available in several shades to meet the needs of all engine builders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAerosols for repainting engines and accessories in original colors.\u003c\/p\u003e\n\u003cp\u003eCaution: as the original paint ages, a difference in hue may appear over the years.\u003c\/p\u003e\n\u003cp\u003eMaximum continuous temperature: 90°C\u003c\/p\u003e\n\u003ctable class=\"table3D crossed\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"1\"\u003eMotor manufacturer\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eHonda\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eJohnson\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eMariner\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eMercury\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eSuzuki\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eYamaha\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eYanmar\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eJohnson Evinrude\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquamarine metallic grey2012\u003c\/td\u003e\n\u003ctd\u003eP205507\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray metal\u003c\/td\u003e\n\u003ctd\u003eP205508\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205516\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205528\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205550\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrey metallic Oyster\u003c\/td\u003e\n\u003ctd\u003eP205509\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205513\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205553\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight gray\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205517\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205519\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDark gray metalized\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205527\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlue 84\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205545\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight gray 94+\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205546\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOcean Blue 74 to 82\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205548\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray metal 87+\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205551\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Crosseven","offers":[{"title":"Honda Aquamarine Silver","offer_id":55898236191097,"sku":"MA-P205507","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Honda Grey","offer_id":55898236223865,"sku":"MA-P205508","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Honda Oyster Grey","offer_id":55898236256633,"sku":"MA-P205509","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Johnson White","offer_id":55898236289401,"sku":"MA-P205513","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Mariner Grey","offer_id":55898236322169,"sku":"MA-P205516","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Mariner Light Grey","offer_id":55898236354937,"sku":"MA-P205517","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Mercury Black","offer_id":55898236387705,"sku":"MA-P205519","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Suzuki Dark Grey","offer_id":55898236420473,"sku":"MA-P205527","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Suzuki Grey","offer_id":55898236453241,"sku":"MA-P205528","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Yamaha Marine Blue","offer_id":55898262110585,"sku":"MA-P205545","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Yamaha Dark Blue\/Grey","offer_id":55898262143353,"sku":"MA-P205546","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Yamaha Ocean Blue","offer_id":55898262176121,"sku":"MA-P205548","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/68812dccbabd9560684188-677763_Spray_Paint_3_1_b.jpg?v=1759323608"},{"product_id":"crosseven-engine-spray-paints","title":"Crosseven Standard Engine Spray Paint","description":"\u003cp\u003eAerosols for repainting engines and accessories in original colors.\u003c\/p\u003e\n\u003cp\u003eCaution: as the original paint ages, a difference in hue may appear over the years.\u003c\/p\u003e\n\u003cp\u003eMaximum continuous temperature: 90°C\u003c\/p\u003e\n\u003ctable border=\"1\" class=\"table3D crossed\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"1\"\u003eType\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eClear coats\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eStandard colours\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransparent\u003c\/td\u003e\n\u003ctd\u003eP205497\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard matte black\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205518\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePure white\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eP205524\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosseven","offers":[{"title":"Transparent","offer_id":55898266206585,"sku":"MA-P205497","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Matt Black","offer_id":55898266239353,"sku":"MA-P205518","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Pure White","offer_id":55898266272121,"sku":"MA-P205524","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/68812ddb1d791768586605-677737_Spray_Paint_2_1.jpg?v=1759324253"},{"product_id":"crosseven-standard-engine-primer","title":"Crosseven Standard Engine Spray Primer","description":"\u003cp\u003e\u003cspan\u003ePrimers for surface preparation and undercoats for full paintwork or touch-ups.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrimers for surface preparation and undercoats for complete painting or touch-ups.\u003cbr type=\"_moz\"\u003e\u003c\/p\u003e\n\u003cp\u003eMaximum continuous temperature: 90°C\u003c\/p\u003e\n\u003cp\u003eFast drying.\u003c\/p\u003e\n\u003ctable class=\"vertical table3D\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003eArticle number\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZink and stainless steel primer\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003eP205493\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntirust green\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003eP205494\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAntirust grey\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003eP205495\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Crosseven","offers":[{"title":"Zinc And Stainless Steel","offer_id":55898298548601,"sku":"MA-P205493","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Antirust Green","offer_id":55898298581369,"sku":"MA-P205494","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"Antirust Grey","offer_id":55898298614137,"sku":"MA-P205495","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/68812dda2a154663071291-677736_Spray_Paint_1_1.jpg?v=1759324926"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/collections\/cat-maintenance-paint_jpg_28fb1045-0193-44ef-ad7a-dd9622aa9e30.png?v=1791886726","url":"https:\/\/marinescene.co.uk\/collections\/paint-varnish-protection-copy.oembed","provider":"Marine Scene","version":"1.0","type":"link"}