{"product_id":"multiflex-eec-005-mercury-mercruiser-style-control-cable","title":"Multiflex EDGE EEC-005 Mercury \/ Mercruiser Generation I Style Engine Control Cable","description":"\u003cp\u003eThe \u003cstrong\u003eMultiflex EEC-005 Mercury Generation I EDGE Control Cable\u003c\/strong\u003e is a low-friction throttle or gear-shift cable for compatible Mercury, MerCruiser and selected Mariner systems using the CCX179 \/ MACH5 end format. It uses an 8.6mm EDGE conduit and a 2.75mm coated inner.\u003c\/p\u003e\n\u003cp\u003eThe EEC-005 has a 4in minimum bend radius and is cross-referenced by Multiflex to SeaStar CCX179 and Ultraflex MACH5. It is the EDGE counterpart to the standard EC-005 cable.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eProduct Identification\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Multiflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ cable family:\u003c\/strong\u003e EEC-005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart-number format:\u003c\/strong\u003e EEC-005-XX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength code:\u003c\/strong\u003e XX identifies the nominal cable length in feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct category:\u003c\/strong\u003e Mechanical marine engine control cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable construction:\u003c\/strong\u003e Low-friction EDGE push-pull control cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary application:\u003c\/strong\u003e Mercury and MerCruiser Generation I systems; selected Mariner applications over 50HP using the CCX179 \/ MACH5 end family\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl functions:\u003c\/strong\u003e Throttle and gear shift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished cable travel:\u003c\/strong\u003e 97mm global \/ 95mm Australian page\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConduit:\u003c\/strong\u003e 8.6mm EDGE conduit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner member:\u003c\/strong\u003e 2.75mm coated flexible inner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable-end thread:\u003c\/strong\u003e Not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum bend radius:\u003c\/strong\u003e 4in \/ approximately 100mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeaStar \/ Morse cross-reference:\u003c\/strong\u003e CCX179\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraflex cross-reference:\u003c\/strong\u003e MACH5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable quantity:\u003c\/strong\u003e One cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine-side mounting hardware included:\u003c\/strong\u003e Not itemised unless expressly stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum push \/ pull load:\u003c\/strong\u003e Not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall cable weight:\u003c\/strong\u003e Not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEDGE wiper seals:\u003c\/strong\u003e Polyurethane seals impregnated with lifetime lubricant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished EDGE benefits:\u003c\/strong\u003e Reduced friction, improved efficiency and minimal backlash\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is the Multiflex EEC-005 Used For?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe EEC-005 transfers mechanical push-pull movement between a compatible remote control and the connected engine or gearbox linkage. The cable does not create movement itself; it transmits the movement generated by the control lever.\u003c\/p\u003e\n\u003cp\u003eIt can form part of a correctly specified:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow-friction Mercury throttle control\u003c\/li\u003e\n\u003cli\u003eLow-friction Mercury gear-shift control\u003c\/li\u003e\n\u003cli\u003eMerCruiser throttle or shift system\u003c\/li\u003e\n\u003cli\u003eReplacement CCX179 cable installation\u003c\/li\u003e\n\u003cli\u003eReplacement MACH5 cable installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is Included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe cable includes its fixed Generation I end fittings. Separate retaining clips, adapters and mounting hardware are not universally itemised.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 x Multiflex EEC-005-XX cable in the selected length\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is Not Included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eNot included unless expressly stated:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemote control lever or control box\u003c\/li\u003e\n\u003cli\u003eA second throttle or shift cable\u003c\/li\u003e\n\u003cli\u003eEngine throttle lever or gearbox selector lever\u003c\/li\u003e\n\u003cli\u003eCable outer-casing clamp or structural support bracket\u003c\/li\u003e\n\u003cli\u003eCable-end eye, clevis, pivot or ball joint unless shown as part of the cable\u003c\/li\u003e\n\u003cli\u003eEngine-specific adapter, retaining clip, pin, nut or washer\u003c\/li\u003e\n\u003cli\u003eElectrical start-in-gear or neutral-safety components\u003c\/li\u003e\n\u003cli\u003eSteering helm, steering wheel or steering cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich Engines and Control Systems Are Compatible?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMultiflex publishes the EEC-005 for Mercury and MerCruiser Generation I systems; selected Mariner applications over 50HP using the CCX179 \/ MACH5 end family. The cable should be selected by its complete end-fitting pattern and required travel, not from engine brand alone.\u003c\/p\u003e\n\u003cp\u003eBefore ordering, confirm:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMercury Generation I remote controls\u003c\/li\u003e\n\u003cli\u003eMerCruiser Generation I systems\u003c\/li\u003e\n\u003cli\u003eSelected Mariner applications over 50HP using matching ends\u003c\/li\u003e\n\u003cli\u003eSystems currently using CCX179 or MACH5 cable ends\u003c\/li\u003e\n\u003cli\u003eThe complete cable family marked on the removed cable\u003c\/li\u003e\n\u003cli\u003eBoth control-head and engine-side end fittings\u003c\/li\u003e\n\u003cli\u003eRequired cable travel and lever movement\u003c\/li\u003e\n\u003cli\u003ePush-to-open or pull-to-open operation\u003c\/li\u003e\n\u003cli\u003eCable routing length and available bend radius\u003c\/li\u003e\n\u003cli\u003eAny engine-specific clip, adapter or retaining hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eCan the Cable Be Used for Both Throttle and Gear Shift?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. Multiflex identifies the EEC-005 for both throttle and gear-shift duty where the control and engine use the same cable-end family and the published travel is suitable.\u003c\/p\u003e\n\u003cp\u003eA conventional single-engine dual-action remote control usually requires two cables: one throttle cable and one shift cable. Each cable must be ordered separately unless the seller expressly states that a pair is supplied.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Many Cables Are Required?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThis listing supplies one cable. The required quantity depends on the control system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne cable for one mechanical control circuit\u003c\/li\u003e\n\u003cli\u003eTwo cables for a typical single-engine throttle-and-shift installation\u003c\/li\u003e\n\u003cli\u003eFour cables for a typical twin-engine throttle-and-shift installation\u003c\/li\u003e\n\u003cli\u003eAdditional cables where a correctly engineered dual-station or specialist control system requires them\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Does the XX Suffix Mean?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIn the part number \u003cstrong\u003eEEC-005-XX\u003c\/strong\u003e, XX identifies the nominal cable length in feet. For example, EEC-005-12 identifies a nominal 12ft cable.\u003c\/p\u003e\n\u003cp\u003eThe suffix does not identify the cable travel, engine application or end-fitting family. Those are determined by the model code before the suffix.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Is the Correct Cable Length Selected?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eFor a new engine-control installation, Multiflex instructs users to measure the routed distance from the control head to the throttle or clutch\/shift connection, round the total up to the next whole foot and, for an outboard installation, add approximately 3ft to allow for engine movement.\u003c\/p\u003e\n\u003cp\u003eFor replacement work, the most reliable starting point is the model and length printed on the existing cable. Compare both end fittings before ordering because two cables of the same length can use different engine-specific terminals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure the intended routed path rather than a straight-line hull dimension\u003c\/li\u003e\n\u003cli\u003eAllow for gradual curves and service access\u003c\/li\u003e\n\u003cli\u003eAvoid unnecessary loops\u003c\/li\u003e\n\u003cli\u003eFor outboards, check cable movement through full steering and tilt travel\u003c\/li\u003e\n\u003cli\u003eRound up to the next available whole-foot length rather than selecting a cable that is too short\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Does Cable Travel Mean?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe published travel for the EEC-005 is \u003cstrong\u003e97mm global \/ 95mm Australian page\u003c\/strong\u003e. Travel is the usable linear movement of the cable inner between its two operating limits.\u003c\/p\u003e\n\u003cp\u003eThe selected cable must provide enough movement for the remote control and engine linkage without bottoming out, overtravelling or leaving incomplete gear engagement or throttle movement. A matching cable length does not compensate for incorrect travel.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is the Minimum Bend Radius?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe published minimum bend radius is \u003cstrong\u003e4in \/ approximately 100mm\u003c\/strong\u003e. The cable must not be routed around a tighter curve.\u003c\/p\u003e\n\u003cp\u003eLarger, gentler bends and fewer changes of direction reduce friction and improve service life. The minimum figure is a limit, not a target routing radius.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Does the EEC-005 Differ From the EC-005?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEEC-005:\u003c\/strong\u003e EDGE conduit, coated flexible inner, tighter bend radius and reduced backlash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC-005:\u003c\/strong\u003e Standard conduit, solid-wire inner and larger minimum bend radius\u003c\/li\u003e\n\u003cli\u003eThe two cable families may share a general engine-end format, but published travel, conduit size and routing requirements must still be checked\u003c\/li\u003e\n\u003cli\u003eDo not assume an EDGE cable is a direct replacement solely because the cross-reference family is similar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eDo the Published Cross-References Guarantee Direct Fitment?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. Multiflex cross-references the EEC-005 to \u003cstrong\u003eCCX179\u003c\/strong\u003e and \u003cstrong\u003eMACH5\u003c\/strong\u003e, but its cross-reference chart states that the information is for reference and users must confirm interchangeability before installation.\u003c\/p\u003e\n\u003cp\u003eDirect replacement depends on both end fittings, usable travel, length, conduit routing, retaining hardware and the control or engine generation.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Are the Cable Dimensions?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMultiflex publishes the conduit dimension as \u003cstrong\u003e8.6mm EDGE conduit\u003c\/strong\u003e and the inner construction as \u003cstrong\u003e2.75mm coated flexible inner\u003c\/strong\u003e. Overall length varies with the selected XX suffix.\u003c\/p\u003e\n\u003cp\u003eUnless separately stated by Multiflex, the following dimensions are not published:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOverall end-to-end length tolerance\u003c\/li\u003e\n\u003cli\u003eControl-end terminal dimensions\u003c\/li\u003e\n\u003cli\u003eEngine-end terminal dimensions\u003c\/li\u003e\n\u003cli\u003eBulkhead or clamp-hub thread dimensions\u003c\/li\u003e\n\u003cli\u003eExposed rod length\u003c\/li\u003e\n\u003cli\u003eTerminal-eye or clevis dimensions\u003c\/li\u003e\n\u003cli\u003eCable weight by length\u003c\/li\u003e\n\u003cli\u003eMaximum push and pull working load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the Cable Include the End Fittings and Mounting Hardware?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe cable is supplied as a complete cable assembly with its model-specific fixed end components. Multiflex does not provide a universal loose-parts list for every retail length and market.\u003c\/p\u003e\n\u003cp\u003eDo not assume that separate pins, clips, cable clamps, ball joints, clevises, terminal eyes, engine brackets or control-box adapters are included unless the seller expressly identifies them.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan This Cable Be Used as a Steering Cable?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The EEC-005 is an engine control cable. It is not a rotary steering cable, rack-and-pinion steering cable, hydraulic hose or steering link arm.\u003c\/p\u003e\n\u003cp\u003eEngine control cables and steering cables use different load cases, end fittings, retaining methods and safety requirements.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs a Maximum Working Load Published?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo numerical maximum push load, pull load or fatigue rating is published on the current product page. The complete control system must be selected according to the engine or gearbox operating force, control-lever geometry, cable route, cable length and the rating of the lowest-rated component.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the EEC-005 a Mercury Generation II Cable?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. Mercury Generation II systems normally use EC-036 or EEC-036. Generation I and Generation II end fittings are different and must be identified physically.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eConstruction and Design\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMultiflex EEC-005 mechanical engine control cable\u003c\/li\u003e\n\u003cli\u003eEDGE low-friction cable construction\u003c\/li\u003e\n\u003cli\u003ePublished for Mercury and MerCruiser Generation I systems; selected Mariner applications over 50HP using the CCX179 \/ MACH5 end family\u003c\/li\u003e\n\u003cli\u003eSuitable for Throttle and gear shift\u003c\/li\u003e\n\u003cli\u003ePublished travel: 97mm global \/ 95mm Australian page\u003c\/li\u003e\n\u003cli\u003eConduit: 8.6mm EDGE conduit\u003c\/li\u003e\n\u003cli\u003eInner: 2.75mm coated flexible inner\u003c\/li\u003e\n\u003cli\u003eCable-end thread: Not published\u003c\/li\u003e\n\u003cli\u003eMinimum bend radius: 4in \/ approximately 100mm\u003c\/li\u003e\n\u003cli\u003eSeaStar \/ Morse reference: CCX179\u003c\/li\u003e\n\u003cli\u003eUltraflex reference: MACH5\u003c\/li\u003e\n\u003cli\u003eLength identified by the XX suffix in feet\u003c\/li\u003e\n\u003cli\u003eOne cable supplied per selected part number\u003c\/li\u003e\n\u003cli\u003eControl head supplied separately\u003c\/li\u003e\n\u003cli\u003eEngine-specific loose mounting hardware not universally itemised\u003c\/li\u003e\n\u003cli\u003eMaximum working load not published\u003c\/li\u003e\n\u003cli\u003eSpecial EDGE conduit for tighter routing\u003c\/li\u003e\n\u003cli\u003eCoated inner designed for low-friction movement\u003c\/li\u003e\n\u003cli\u003ePolyurethane wiper seals impregnated with lifetime lubricant\u003c\/li\u003e\n\u003cli\u003ePublished reduced-backlash design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eInstallation and Safety\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eEngine throttle, shift and shut-off controls are safety-critical. Installation and adjustment should be completed by a competent marine technician using the current Multiflex, remote-control, engine and gearbox instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm that the cable family is EEC-005\u003c\/li\u003e\n\u003cli\u003eRead the model and length from the removed cable where possible\u003c\/li\u003e\n\u003cli\u003eCompare both cable ends before ordering\u003c\/li\u003e\n\u003cli\u003eConfirm the remote-control and engine\/gearbox generation\u003c\/li\u003e\n\u003cli\u003eVerify the required cable travel\u003c\/li\u003e\n\u003cli\u003eConfirm push-to-open or pull-to-open operation\u003c\/li\u003e\n\u003cli\u003eMeasure the routed cable length accurately\u003c\/li\u003e\n\u003cli\u003eAllow additional length for outboard movement where required\u003c\/li\u003e\n\u003cli\u003eMaintain at least the published minimum bend radius of 4in \/ approximately 100mm\u003c\/li\u003e\n\u003cli\u003eUse the fewest and largest-radius bends practical\u003c\/li\u003e\n\u003cli\u003eKeep the cable clear of exhaust components, sharp edges and moving machinery\u003c\/li\u003e\n\u003cli\u003eSupport the cable outer without crushing or kinking the conduit\u003c\/li\u003e\n\u003cli\u003eDo not clamp the moving rod\u003c\/li\u003e\n\u003cli\u003eInstall the correct terminal pin, clip, nut or adapter\u003c\/li\u003e\n\u003cli\u003eSet the throttle and control to idle before final throttle adjustment\u003c\/li\u003e\n\u003cli\u003eSet the control and gearbox to neutral before final shift adjustment\u003c\/li\u003e\n\u003cli\u003eConfirm full forward, neutral and reverse engagement where used for shifting\u003c\/li\u003e\n\u003cli\u003eConfirm complete idle-to-full-throttle movement where used for throttle\u003c\/li\u003e\n\u003cli\u003eEnsure the cable does not bottom out before the engine or gearbox reaches its stop\u003c\/li\u003e\n\u003cli\u003eCheck that no surrounding structure loads the cable ends sideways\u003c\/li\u003e\n\u003cli\u003eRecheck all retainers and clamps after the initial operating test\u003c\/li\u003e\n\u003cli\u003eReplace a cable that is stiff, corroded, abraded, kinked or has reduced usable travel\u003c\/li\u003e\n\u003cli\u003eDo not shorten, weld, straighten, dismantle or internally lubricate the cable unless Multiflex publishes an approved procedure\u003c\/li\u003e\n\u003cli\u003eDo not operate the vessel if gear selection, throttle return or engine-stop operation is uncertain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eMaintenance\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eInspect the complete cable route, end fittings and retaining hardware periodically. A gradual increase in operating effort, lost travel, damaged conduit or corrosion indicates that the cable or related linkage requires attention.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep the cable ends and external linkage clean\u003c\/li\u003e\n\u003cli\u003eInspect terminal pins, clips and nuts for wear or looseness\u003c\/li\u003e\n\u003cli\u003eCheck the outer jacket for abrasion, cracking, heat damage or crushing\u003c\/li\u003e\n\u003cli\u003eConfirm the control returns correctly to idle and neutral\u003c\/li\u003e\n\u003cli\u003eReplace the complete cable rather than attempting an internal repair\u003c\/li\u003e\n\u003cli\u003eRecheck the cable after any engine, gearbox or control-head service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMultiflex EEC-005 control cable\u003c\/li\u003e\n\u003cli\u003eEDGE low-friction construction\u003c\/li\u003e\n\u003cli\u003ePublished for Mercury and MerCruiser Generation I systems; selected Mariner applications over 50HP using the CCX179 \/ MACH5 end family\u003c\/li\u003e\n\u003cli\u003eUsed for Throttle and gear shift\u003c\/li\u003e\n\u003cli\u003ePublished travel: 97mm global \/ 95mm Australian page\u003c\/li\u003e\n\u003cli\u003eConduit: 8.6mm EDGE conduit\u003c\/li\u003e\n\u003cli\u003eInner: 2.75mm coated flexible inner\u003c\/li\u003e\n\u003cli\u003eThread: Not published\u003c\/li\u003e\n\u003cli\u003eMinimum bend radius: 4in \/ approximately 100mm\u003c\/li\u003e\n\u003cli\u003eCCX179 cross-reference\u003c\/li\u003e\n\u003cli\u003eMACH5 cross-reference\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple foot lengths\u003c\/li\u003e\n\u003cli\u003eOne cable supplied\u003c\/li\u003e\n\u003cli\u003eControl head and engine-specific loose hardware supplied separately\u003c\/li\u003e\n\u003cli\u003eDirect fit must be confirmed from both end fittings and travel\u003c\/li\u003e\n\u003cli\u003eReduced-friction EDGE conduit\u003c\/li\u003e\n\u003cli\u003eMinimal-backlash design\u003c\/li\u003e\n\u003cli\u003eLifetime-lubricated polyurethane wiper seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 24.2908%;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; font-weight: 500; width: 75.7092%;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eMultiflex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eModel \/ Cable Family\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eEEC-005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003ePart-Number Format\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eEEC-005-XX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eLength Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eXX identifies nominal cable length in feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eProduct Category\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eMechanical Marine Engine Control Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eCable Construction\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eLow-Friction EDGE Push-Pull Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003ePrimary Application\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eMercury and MerCruiser Generation I systems; selected Mariner applications over 50HP using the CCX179 \/ MACH5 end family\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eControl Functions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eThrottle and gear shift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003ePublished Travel\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003e97mm global \/ 95mm Australian page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eConduit\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003e8.6mm EDGE conduit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eInner Member\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003e2.75mm coated flexible inner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eCable-End Thread\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eMinimum Bend Radius\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003e4in \/ approximately 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eEDGE Wiper Seals\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003ePolyurethane with Incorporated Lifetime Lubricant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003ePublished EDGE Benefits\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eReduced Friction, Improved Efficiency and Minimal Backlash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eSeaStar \/ Morse Cross-Reference\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eCCX179\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eUltraflex Cross-Reference\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eMACH5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eCross-Reference Status\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eReference Only; Confirm Interchangeability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eStandard \/ EDGE Counterpart\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eEC-005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eCable Quantity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eOne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eRemote Control Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eSecond Control Cable Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eEngine-Side Loose Hardware\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNot Universally Itemised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eOverall Length\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eVaries by XX Foot-Length Suffix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eControl-End Dimensions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNot Published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eEngine-End Dimensions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNot Published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eCable Weight\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNot Published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eMaximum Push \/ Pull Load\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNot Published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eProduct Data Clarification\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eThe global Multiflex page publishes 97mm travel, while the current Multiflex Australia page publishes 95mm. Confirm the required full stroke before replacing an existing cable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eDirect-Fit Confirmation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eConfirm Both Ends, Length, Travel, Bend Radius, Retainers and Control Geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 24.2908%;\"\u003eGeneration II Compatibility\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(221, 221, 221); padding: 8px; text-align: center; width: 75.7092%;\"\u003eNo; Use EC-036 \/ EEC-036 Where Specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Multiflex","offers":[{"title":"6 Foot","offer_id":64317403431289,"sku":"MA-EEC-005-06","price":26.95,"currency_code":"GBP","in_stock":false},{"title":"7 Foot","offer_id":64317403464057,"sku":"MA-EEC-005-07","price":57.98,"currency_code":"GBP","in_stock":true},{"title":"8 Foot","offer_id":64317403496825,"sku":"MA-EEC-005-08","price":61.98,"currency_code":"GBP","in_stock":true},{"title":"9 Foot","offer_id":64317403529593,"sku":"MA-EEC-005-09","price":62.98,"currency_code":"GBP","in_stock":true},{"title":"10 Foot","offer_id":64317403562361,"sku":"MA-EEC-005-10","price":66.98,"currency_code":"GBP","in_stock":true},{"title":"11 Foot","offer_id":64317403595129,"sku":"MA-EEC-005-11","price":67.98,"currency_code":"GBP","in_stock":true},{"title":"12 Foot","offer_id":64317403627897,"sku":"MA-EEC-005-12","price":71.98,"currency_code":"GBP","in_stock":true},{"title":"13 Foot","offer_id":64317403660665,"sku":"MA-EEC-005-13","price":74.98,"currency_code":"GBP","in_stock":true},{"title":"14 Foot","offer_id":64317403693433,"sku":"MA-EEC-005-14","price":76.98,"currency_code":"GBP","in_stock":true},{"title":"15 Foot","offer_id":64317403726201,"sku":"MA-EEC-005-15","price":79.98,"currency_code":"GBP","in_stock":true},{"title":"16 Foot","offer_id":64317403758969,"sku":"MA-EEC-005-16","price":81.98,"currency_code":"GBP","in_stock":true},{"title":"17 Foot","offer_id":64317403791737,"sku":"MA-EEC-005-17","price":84.98,"currency_code":"GBP","in_stock":true},{"title":"18 Foot","offer_id":64317403824505,"sku":"MA-EEC-005-18","price":87.98,"currency_code":"GBP","in_stock":true},{"title":"19 Foot","offer_id":64317403857273,"sku":"MA-EEC-005-19","price":89.98,"currency_code":"GBP","in_stock":true},{"title":"20 Foot","offer_id":64317403890041,"sku":"MA-EEC-005-20","price":92.98,"currency_code":"GBP","in_stock":true},{"title":"22 Foot","offer_id":64317403922809,"sku":"MA-EEC-005-22","price":97.98,"currency_code":"GBP","in_stock":true},{"title":"23 Foot","offer_id":64317403955577,"sku":"MA-EEC-005-23","price":99.98,"currency_code":"GBP","in_stock":true},{"title":"24 Foot","offer_id":64317403988345,"sku":"MA-EEC-005-24","price":102.98,"currency_code":"GBP","in_stock":true},{"title":"25 Foot","offer_id":64317404021113,"sku":"MA-EEC-005-25","price":105.98,"currency_code":"GBP","in_stock":true},{"title":"26 Foot","offer_id":64317404053881,"sku":"MA-EEC-005-26","price":107.98,"currency_code":"GBP","in_stock":true},{"title":"27 Foot","offer_id":64317404086649,"sku":"MA-EEC-005-27","price":110.98,"currency_code":"GBP","in_stock":true},{"title":"28 Foot","offer_id":64317404119417,"sku":"MA-EEC-005-28","price":112.98,"currency_code":"GBP","in_stock":true},{"title":"29 Foot","offer_id":64317404152185,"sku":"MA-EEC-005-29","price":115.98,"currency_code":"GBP","in_stock":true},{"title":"30 Foot","offer_id":64317404184953,"sku":"MA-EEC-005-30","price":117.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/61bfae40a3243.webp?v=1787229552","url":"https:\/\/marinescene.co.uk\/products\/multiflex-eec-005-mercury-mercruiser-style-control-cable","provider":"Marine Scene","version":"1.0","type":"link"}