{"product_id":"multiflex-s1-splashwell-mounting-steering-cable-support","title":"Multiflex S1 Splashwell Steering Cable Mounting Kit","description":"\u003cp\u003eThe \u003cstrong\u003eMultiflex S1 Splashwell Mounting Kit\u003c\/strong\u003e supports a compatible mechanical steering cable where a standard engine tilt tube or transom support bracket cannot be used because of the boat's splashwell layout. It uses stainless-steel mounting plates, a threaded aluminium support tube and a ball-type articulated mounting arrangement. The assembly measures approximately \u003cstrong\u003e280mm \/ 11in long\u003c\/strong\u003e with an \u003cstrong\u003e89.9mm \/ 3.53in mounting plate diameter\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eProduct Identification\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Multiflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ item code:\u003c\/strong\u003e S1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct category:\u003c\/strong\u003e Mechanical steering system accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Splashwell steering cable mounting kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Supports a mechanical steering cable at the splashwell\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable installation:\u003c\/strong\u003e Boats where a splashwell box prevents standard tilt-tube or transom-support mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative suitable installation:\u003c\/strong\u003e Boats without a suitable engine tilt tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting plate material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport tube material:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport tube design:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished assembly length:\u003c\/strong\u003e 280mm \/ 11in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished mounting plate diameter:\u003c\/strong\u003e 89.9mm \/ 3.53in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting surface orientation:\u003c\/strong\u003e Normally perpendicular to the transom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-stated mounting position:\u003c\/strong\u003e 12-16in from the boat centreline and\/or tiller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate metric mounting position:\u003c\/strong\u003e 305-406mm from the centreline and\/or tiller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-stated total splashwell width:\u003c\/strong\u003e 25-33in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate metric splashwell width:\u003c\/strong\u003e 635-838mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDometic \/ SeaStar cross-reference:\u003c\/strong\u003e SA27253P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltraflex cross-references:\u003c\/strong\u003e S40 and S55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering system type:\u003c\/strong\u003e Mechanical cable steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic steering component:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMultiflex describes the S1 as a replacement for the ball-post and splashwell mounting assembly used in steering connection kits.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is a Splashwell Mounting Kit Used For?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Multiflex S1 provides a fixed support and pivot point for the outer section of a compatible mechanical steering cable.\u003c\/p\u003e\n\u003cp\u003eHolding the cable support securely allows the cable's moving inner output member to transfer steering movement to the outboard engine through a separately selected steering link arm.\u003c\/p\u003e\n\u003cp\u003eThe S1 can form part of a correctly specified:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutboard mechanical steering installation\u003c\/li\u003e\n\u003cli\u003eSplashwell-mounted steering arrangement\u003c\/li\u003e\n\u003cli\u003eNew steering installation without a usable engine tilt tube\u003c\/li\u003e\n\u003cli\u003eReplacement of a compatible splashwell mounting assembly\u003c\/li\u003e\n\u003cli\u003eInstallation where a splashwell box prevents a conventional transom support bracket\u003c\/li\u003e\n\u003cli\u003eSteering connection kit requiring a replacement ball-post and support-tube assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe S1 supports the steering cable; it does not generate steering movement and does not replace the steering helm, steering cable or engine link arm.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhen Is the S1 Splashwell Mount Required?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S1 is intended for boats where the normal steering-cable mounting options are unavailable or obstructed.\u003c\/p\u003e\n\u003cp\u003eTypical reasons for selecting the S1 include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe outboard engine has no suitable steering tilt tube\u003c\/li\u003e\n\u003cli\u003eThe engine tilt tube cannot be used for the selected steering arrangement\u003c\/li\u003e\n\u003cli\u003eA splashwell box obstructs a standard transom support bracket\u003c\/li\u003e\n\u003cli\u003eThe steering cable must be supported from a surface perpendicular to the transom\u003c\/li\u003e\n\u003cli\u003eThe cable requires a ball-type mounting point that permits angular movement\u003c\/li\u003e\n\u003cli\u003eAn existing compatible splashwell mounting assembly requires replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMultiflex states that the mounting surface is usually perpendicular to the transom and positioned between 12in and 16in from the centreline of the boat and\/or tiller. The stated corresponding total splashwell width is 25-33in.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is Included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe official S1 installation manual identifies the following kit contents:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 x threaded aluminium support tube\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2 x clamp bend plates\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x clamp plate\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x plastic ball\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x plastic cap\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 x M6 stainless-steel hex bolts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 x M6 Nyloc nuts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 x M6 stainless-steel washers\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included unless expressly stated:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMechanical steering cable\u003c\/li\u003e\n\u003cli\u003eSteering helm\u003c\/li\u003e\n\u003cli\u003eSteering wheel\u003c\/li\u003e\n\u003cli\u003eDashboard bezel\u003c\/li\u003e\n\u003cli\u003eEngine steering link arm\u003c\/li\u003e\n\u003cli\u003eEngine tiller arm\u003c\/li\u003e\n\u003cli\u003eSteering cable-to-engine connection hardware\u003c\/li\u003e\n\u003cli\u003eEngine-specific adaptor\u003c\/li\u003e\n\u003cli\u003eTransom clamp block\u003c\/li\u003e\n\u003cli\u003eHydraulic steering cylinder\u003c\/li\u003e\n\u003cli\u003eAdditional structural mounting hardware beyond the listed M6 components\u003c\/li\u003e\n\u003cli\u003eOther installation-specific steering parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Are the Published Product Dimensions?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall assembly length:\u003c\/strong\u003e 280mm \/ 11in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting plate outside diameter:\u003c\/strong\u003e 89.9mm \/ 3.53in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe available manufacturer data do not state:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual plate thickness\u003c\/li\u003e\n\u003cli\u003eSupport-tube outside diameter\u003c\/li\u003e\n\u003cli\u003eSupport-tube inside diameter\u003c\/li\u003e\n\u003cli\u003eThread diameter\u003c\/li\u003e\n\u003cli\u003eThread pitch\u003c\/li\u003e\n\u003cli\u003eMounting-hole diameter\u003c\/li\u003e\n\u003cli\u003eMounting-hole pitch-circle diameter\u003c\/li\u003e\n\u003cli\u003eDistance between individual M6 holes\u003c\/li\u003e\n\u003cli\u003eMaximum articulation angle\u003c\/li\u003e\n\u003cli\u003eProduct weight\u003c\/li\u003e\n\u003cli\u003eMaximum steering load\u003c\/li\u003e\n\u003cli\u003eMaximum engine horsepower\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhere these dimensions are critical, check the physical S1 kit or a current Multiflex technical drawing before drilling the boat.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Does the 12-16in Mounting Position Mean?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-stated position:\u003c\/strong\u003e 12-16in from the centreline of the boat and\/or tiller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate metric position:\u003c\/strong\u003e 305-406mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-stated total splashwell width:\u003c\/strong\u003e 25-33in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate metric splashwell width:\u003c\/strong\u003e 635-838mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is the manufacturer's usual installation geometry, not a guarantee that the S1 will fit every boat within those dimensions. The mounting position must also provide correct cable alignment, steering travel and clearance throughout the engine's steering and tilt range.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Is the S1 Installed?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eThe steering cable is prepared and passed into the threaded aluminium support-tube assembly.\u003c\/li\u003e\n\u003cli\u003eThe stainless-steel plate assembly and plastic ball are positioned through the splashwell mounting surface.\u003c\/li\u003e\n\u003cli\u003eThe plate assembly is secured using the supplied M6 bolts, washers and Nyloc nuts.\u003c\/li\u003e\n\u003cli\u003eThe moving steering-cable end is connected to the outboard engine through a suitable link arm.\u003c\/li\u003e\n\u003cli\u003eThe completed installation is checked for correct alignment and unrestricted engine movement.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe exact drilling procedure, tightening torque and cable adjustment values are not stated in the visible manual text. Use the current Multiflex instructions and the requirements of the steering cable and engine.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Does the Plastic Ball Do?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S1 includes a plastic ball within the mounting plate assembly.\u003c\/p\u003e\n\u003cp\u003eThis ball-type arrangement allows the support tube and steering cable to align with the engine connection while the plates secure the assembly to the splashwell surface.\u003c\/p\u003e\n\u003cp\u003eThe articulated mounting arrangement is intended to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport the steering cable outer assembly\u003c\/li\u003e\n\u003cli\u003ePermit the required cable approach angle\u003c\/li\u003e\n\u003cli\u003eReduce unwanted side loading\u003c\/li\u003e\n\u003cli\u003eAllow alignment with the engine tiller\u003c\/li\u003e\n\u003cli\u003eMaintain a secure mounting point through the splashwell wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich Steering Cables Are Compatible?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe current S1 product data do not identify a specific Multiflex steering-cable model.\u003c\/p\u003e\n\u003cp\u003eThe selected cable must have a support and output arrangement compatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe S1 threaded aluminium support tube\u003c\/li\u003e\n\u003cli\u003eThe ball-type splashwell mount\u003c\/li\u003e\n\u003cli\u003eThe selected steering helm\u003c\/li\u003e\n\u003cli\u003eThe engine link arm\u003c\/li\u003e\n\u003cli\u003eThe required steering travel\u003c\/li\u003e\n\u003cli\u003eThe available installation space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, confirm:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteering-cable manufacturer\u003c\/li\u003e\n\u003cli\u003eSteering-cable model\u003c\/li\u003e\n\u003cli\u003eCable output-end design\u003c\/li\u003e\n\u003cli\u003eSupport-tube or threaded mounting interface\u003c\/li\u003e\n\u003cli\u003eCable travel\u003c\/li\u003e\n\u003cli\u003eCable length\u003c\/li\u003e\n\u003cli\u003eMinimum bend radius\u003c\/li\u003e\n\u003cli\u003eEngine connection\u003c\/li\u003e\n\u003cli\u003eRequired link arm\u003c\/li\u003e\n\u003cli\u003eMaximum steering-system rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the S1 Compatible with Dometic \/ SeaStar SA27253P?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMultiflex lists the S1 as compatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDometic \/ SeaStar SA27253P\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMultiflex states that its cross-reference information is supplied for reference and that users must confirm interchangeability before installation.\u003c\/p\u003e\n\u003cp\u003eBefore replacing an SA27253P assembly, compare:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport-tube dimensions\u003c\/li\u003e\n\u003cli\u003ePlate diameter\u003c\/li\u003e\n\u003cli\u003eMounting-hole positions\u003c\/li\u003e\n\u003cli\u003eThreaded connection\u003c\/li\u003e\n\u003cli\u003eBall and plate geometry\u003c\/li\u003e\n\u003cli\u003eSteering-cable fit\u003c\/li\u003e\n\u003cli\u003eAvailable steering travel\u003c\/li\u003e\n\u003cli\u003eSplashwell wall thickness\u003c\/li\u003e\n\u003cli\u003eEngine link-arm arrangement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich Ultraflex Parts Cross-Reference to the S1?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMultiflex lists the following Ultraflex references for the S1:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eUltraflex S40\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUltraflex S55\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe references are selection guidance. Confirm the exact existing model, steering-cable type, support-tube dimensions, mounting-hole pattern and engine connection before installation.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDo the Cross-References Guarantee Direct Fitment?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. Direct replacement depends on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoat structure\u003c\/li\u003e\n\u003cli\u003eSplashwell width\u003c\/li\u003e\n\u003cli\u003eMounting-surface position\u003c\/li\u003e\n\u003cli\u003eMounting-hole arrangement\u003c\/li\u003e\n\u003cli\u003eWall thickness\u003c\/li\u003e\n\u003cli\u003eSteering-cable interface\u003c\/li\u003e\n\u003cli\u003eCable travel\u003c\/li\u003e\n\u003cli\u003eEngine tiller geometry\u003c\/li\u003e\n\u003cli\u003eLink-arm dimensions\u003c\/li\u003e\n\u003cli\u003eSteering and tilt clearances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not drill new mounting holes or reuse an existing hole pattern until the physical S1 assembly has been checked against the boat.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the S1 Replace an Engine Tilt Tube?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S1 provides an alternative cable-support arrangement where a usable engine tilt tube is unavailable.\u003c\/p\u003e\n\u003cp\u003eIt should not be described as a universal tilt-tube replacement for every outboard engine. Correct installation still depends on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA structurally suitable splashwell surface\u003c\/li\u003e\n\u003cli\u003eCorrect distance from the engine tiller\u003c\/li\u003e\n\u003cli\u003eCompatible steering-cable travel\u003c\/li\u003e\n\u003cli\u003eCorrect cable alignment\u003c\/li\u003e\n\u003cli\u003eA suitable link arm\u003c\/li\u003e\n\u003cli\u003eClearance through the full steering range\u003c\/li\u003e\n\u003cli\u003eClearance through the full engine tilt range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the S1 Replace a Transom Clamp Block?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S1 is used where a standard transom support mounting arrangement is prevented by the splashwell box or installation layout.\u003c\/p\u003e\n\u003cp\u003eIt performs the steering-cable support function through a splashwell mounting surface rather than through a conventional transom-mounted clamp-block arrangement.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the S1 Include a Steering Link Arm?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo steering link arm is listed in the S1 kit contents.\u003c\/p\u003e\n\u003cp\u003eThe correct link arm must be selected according to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteering-cable output end\u003c\/li\u003e\n\u003cli\u003eOutboard engine make and model\u003c\/li\u003e\n\u003cli\u003eEngine tiller mounting point\u003c\/li\u003e\n\u003cli\u003eRequired arm length and offset\u003c\/li\u003e\n\u003cli\u003eMounting-bolt diameter\u003c\/li\u003e\n\u003cli\u003eSteering travel\u003c\/li\u003e\n\u003cli\u003eEngine tilt clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eCan the S1 Be Used for Inboard Steering?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S1 is specifically described and illustrated as a splashwell mounting kit for an outboard mechanical steering installation.\u003c\/p\u003e\n\u003cp\u003eThe available manufacturer data do not identify it as an inboard rudder mounting bracket.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan the S1 Be Used with Hydraulic Steering?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S1 is a mechanical steering system accessory designed to support a mechanical steering cable.\u003c\/p\u003e\n\u003cp\u003eIt is not identified as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA hydraulic cylinder mount\u003c\/li\u003e\n\u003cli\u003eA hydraulic helm component\u003c\/li\u003e\n\u003cli\u003eA hydraulic hose bulkhead fitting\u003c\/li\u003e\n\u003cli\u003eA hydraulic tie bar\u003c\/li\u003e\n\u003cli\u003eA hydraulic engine bracket\u003c\/li\u003e\n\u003cli\u003eA hydraulic steering adaptor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the S1 a Complete Steering System?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The Multiflex S1 is the splashwell cable-support assembly only.\u003c\/p\u003e\n\u003cp\u003eA complete mechanical steering system may also require:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteering wheel\u003c\/li\u003e\n\u003cli\u003eSteering helm\u003c\/li\u003e\n\u003cli\u003eDashboard bezel\u003c\/li\u003e\n\u003cli\u003eCorrectly measured mechanical steering cable\u003c\/li\u003e\n\u003cli\u003eS1 splashwell mounting kit\u003c\/li\u003e\n\u003cli\u003eCompatible steering link arm\u003c\/li\u003e\n\u003cli\u003eEngine tiller connection\u003c\/li\u003e\n\u003cli\u003eEngine-specific mounting hardware\u003c\/li\u003e\n\u003cli\u003eSuitable splashwell structure\u003c\/li\u003e\n\u003cli\u003eCorrect steering and tilt clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eConstruction and Design\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMultiflex mechanical steering accessory\u003c\/li\u003e\n\u003cli\u003eItem code S1\u003c\/li\u003e\n\u003cli\u003eSplashwell steering cable mounting design\u003c\/li\u003e\n\u003cli\u003eIntended for outboard mechanical steering installations\u003c\/li\u003e\n\u003cli\u003eUsed where a normal engine tilt tube is unavailable\u003c\/li\u003e\n\u003cli\u003eUsed where a splashwell box prevents standard transom-support mounting\u003c\/li\u003e\n\u003cli\u003eStainless-steel mounting plate assembly\u003c\/li\u003e\n\u003cli\u003eThreaded aluminium support tube\u003c\/li\u003e\n\u003cli\u003ePlastic articulation ball\u003c\/li\u003e\n\u003cli\u003ePlastic end cap\u003c\/li\u003e\n\u003cli\u003eTwo clamp bend plates\u003c\/li\u003e\n\u003cli\u003eOne clamp plate\u003c\/li\u003e\n\u003cli\u003eFour M6 stainless-steel hex bolts\u003c\/li\u003e\n\u003cli\u003eFour M6 stainless-steel washers\u003c\/li\u003e\n\u003cli\u003eFour M6 Nyloc nuts\u003c\/li\u003e\n\u003cli\u003e280mm \/ 11in published overall assembly length\u003c\/li\u003e\n\u003cli\u003e89.9mm \/ 3.53in published mounting plate diameter\u003c\/li\u003e\n\u003cli\u003eMounting surface normally perpendicular to the transom\u003c\/li\u003e\n\u003cli\u003eUsual position 12-16in from the centreline and\/or tiller\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated total splashwell width of 25-33in\u003c\/li\u003e\n\u003cli\u003eNo electrical components\u003c\/li\u003e\n\u003cli\u003eNo hydraulic components\u003c\/li\u003e\n\u003cli\u003eNo steering cable included\u003c\/li\u003e\n\u003cli\u003eNo steering helm included\u003c\/li\u003e\n\u003cli\u003eNo engine link arm included\u003c\/li\u003e\n\u003cli\u003eMaximum steering load not published\u003c\/li\u003e\n\u003cli\u003eMaximum engine horsepower not published\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eInstallation and Safety\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eBefore installing the Multiflex S1:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm that the boat requires a splashwell-mounted steering-cable support\u003c\/li\u003e\n\u003cli\u003eVerify that the engine has no suitable tilt-tube mounting arrangement\u003c\/li\u003e\n\u003cli\u003eConfirm that a standard transom support bracket cannot be used\u003c\/li\u003e\n\u003cli\u003eCheck that the splashwell mounting surface is structurally suitable\u003c\/li\u003e\n\u003cli\u003eConfirm that the intended surface is correctly positioned relative to the engine tiller\u003c\/li\u003e\n\u003cli\u003eCheck the manufacturer's 12-16in centreline guidance\u003c\/li\u003e\n\u003cli\u003eConfirm that the steering cable is compatible with the S1 support tube\u003c\/li\u003e\n\u003cli\u003eVerify the steering cable's required length and travel\u003c\/li\u003e\n\u003cli\u003eMaintain the cable manufacturer's minimum bend radius\u003c\/li\u003e\n\u003cli\u003eConfirm compatibility with the selected engine link arm\u003c\/li\u003e\n\u003cli\u003eCheck the 89.9mm mounting plate clearance before drilling\u003c\/li\u003e\n\u003cli\u003eCheck the 280mm assembly length against the available space\u003c\/li\u003e\n\u003cli\u003eUse the supplied M6 stainless-steel bolts, washers and Nyloc nuts correctly\u003c\/li\u003e\n\u003cli\u003eEnsure the plastic ball is seated correctly between the plate components\u003c\/li\u003e\n\u003cli\u003eTighten the mounting hardware evenly\u003c\/li\u003e\n\u003cli\u003eDo not distort the stainless-steel plates or splashwell surface\u003c\/li\u003e\n\u003cli\u003eDo not clamp the steering cable tightly enough to restrict its movement\u003c\/li\u003e\n\u003cli\u003eAlign the cable without excessive side loading\u003c\/li\u003e\n\u003cli\u003eEnsure the plastic cap is installed correctly\u003c\/li\u003e\n\u003cli\u003eConnect the cable output to the engine using the correct link arm\u003c\/li\u003e\n\u003cli\u003eTurn the steering fully from port to starboard\u003c\/li\u003e\n\u003cli\u003eConfirm that the cable moves freely throughout its travel\u003c\/li\u003e\n\u003cli\u003eCheck that the engine reaches both steering locks without binding\u003c\/li\u003e\n\u003cli\u003eTilt the engine fully upward and downward\u003c\/li\u003e\n\u003cli\u003eRepeat the steering-clearance check throughout the tilt range\u003c\/li\u003e\n\u003cli\u003eEnsure the support tube, cable and link arm do not contact the transom or splashwell\u003c\/li\u003e\n\u003cli\u003eRecheck the M6 fasteners after the initial steering test\u003c\/li\u003e\n\u003cli\u003eInspect the plates, tube, plastic ball and fasteners regularly\u003c\/li\u003e\n\u003cli\u003eReplace any bent, cracked, loose or excessively corroded component\u003c\/li\u003e\n\u003cli\u003eDo not operate the boat if the steering cable or mounting assembly binds\u003c\/li\u003e\n\u003cli\u003eDo not exceed the rating of the lowest-rated steering component\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMarine steering is safety-critical. Installation should be completed according to the current Multiflex, steering-cable, engine and boat instructions by a competent marine technician.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMultiflex S1 splashwell mounting kit\u003c\/li\u003e\n\u003cli\u003eDesigned for compatible mechanical steering cables\u003c\/li\u003e\n\u003cli\u003eSupports the steering cable at the boat's splashwell\u003c\/li\u003e\n\u003cli\u003eIntended for boats without a usable engine tilt tube\u003c\/li\u003e\n\u003cli\u003eSuitable where a splashwell box prevents standard transom-support mounting\u003c\/li\u003e\n\u003cli\u003eStainless-steel mounting plates\u003c\/li\u003e\n\u003cli\u003eThreaded aluminium support tube\u003c\/li\u003e\n\u003cli\u003ePlastic ball provides an articulated mounting arrangement\u003c\/li\u003e\n\u003cli\u003ePlastic protective cap\u003c\/li\u003e\n\u003cli\u003e280mm \/ 11in published overall length\u003c\/li\u003e\n\u003cli\u003e89.9mm \/ 3.53in mounting plate diameter\u003c\/li\u003e\n\u003cli\u003eFour M6 stainless-steel mounting bolts included\u003c\/li\u003e\n\u003cli\u003eFour M6 stainless-steel washers included\u003c\/li\u003e\n\u003cli\u003eFour M6 Nyloc nuts included\u003c\/li\u003e\n\u003cli\u003eManufacturer mounting guidance of 12-16in from the centreline and\/or tiller\u003c\/li\u003e\n\u003cli\u003eIntended for a stated total splashwell width of 25-33in\u003c\/li\u003e\n\u003cli\u003eCross-referenced to Dometic \/ SeaStar SA27253P\u003c\/li\u003e\n\u003cli\u003eCross-referenced to Ultraflex S40 and S55\u003c\/li\u003e\n\u003cli\u003eCross-references require fitment verification\u003c\/li\u003e\n\u003cli\u003eReplacement for a compatible ball-post and splashwell mounting assembly\u003c\/li\u003e\n\u003cli\u003eSteering cable supplied separately\u003c\/li\u003e\n\u003cli\u003eSteering helm supplied separately\u003c\/li\u003e\n\u003cli\u003eSteering wheel supplied separately\u003c\/li\u003e\n\u003cli\u003eEngine link arm supplied separately\u003c\/li\u003e\n\u003cli\u003eNo specific steering-cable model published\u003c\/li\u003e\n\u003cli\u003eNo maximum horsepower rating published\u003c\/li\u003e\n\u003cli\u003eMounting geometry must be confirmed before drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; min-width: 550px; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eS1\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMultiflex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eModel \/ Item Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eS1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eProduct Category\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMechanical Steering System Accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eSplashwell Steering Cable Mounting Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003ePrimary Function\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eSupports a Mechanical Steering Cable at the Splashwell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering System Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMechanical Cable Steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003ePrimary Application\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eOutboard Splashwell Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSuitable Where Engine Tilt Tube Is Unavailable\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSuitable Where Splashwell Prevents Transom Support Mounting\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Surface Orientation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNormally Perpendicular to the Transom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eManufacturer-Stated Centreline Distance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e12-16in \/ Approximately 305-406mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eManufacturer-Stated Total Splashwell Width\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e25-33in \/ Approximately 635-838mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003ePublished Overall Assembly Length\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e280mm \/ 11in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003ePublished Mounting Plate Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e89.9mm \/ 3.53in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Plate Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupport Tube Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupport Tube Design\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eThreaded Aluminium Support Tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eThreaded Aluminium Support Tube\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e1 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eClamp Bend Plates\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e2 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eClamp Plate\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e1 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eArticulation Ball\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e1 Plastic Ball Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eProtective Cap\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e1 Plastic Cap Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Bolts\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4 x M6 Stainless-Steel Hex Bolts Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Nuts\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4 x M6 Nyloc Nuts Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Washers\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4 x M6 Stainless-Steel Washers Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eReplacement Function\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eBall-Post and Splashwell Mounting Assembly in Compatible Steering Connection Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eDometic \/ SeaStar Cross-Reference\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eSA27253P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eUltraflex Cross-Reference\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eS40 \/ S55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eCross-Reference Status\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eReference Only; Confirm Interchangeability Before Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSpecific Multiflex Steering Cable\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated in Current Product Data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Cable Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Helm Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Wheel Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eEngine Link Arm Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eHydraulic Steering Component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupport Tube Outside Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eThread Diameter and Pitch\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting-Hole Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting-Hole Spacing\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Articulation Angle\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Steering Load\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Engine Horsepower\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eDirect-Fit Confirmation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eConfirm Cable Interface, Splashwell Geometry, Mounting Position, Link Arm and Steering Clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Multiflex","offers":[{"title":"Default Title","offer_id":64236743491961,"sku":"MA-LM-S-1","price":37.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/612473927444a.webp?v=1786627686","url":"https:\/\/marinescene.co.uk\/products\/multiflex-s1-splashwell-mounting-steering-cable-support","provider":"Marine Scene","version":"1.0","type":"link"}