{"product_id":"multiflex-s2-dual-steering-cable-transom-support-bracket","title":"Multiflex S2 90° Transom Mount Steering Cable Support Bracket","description":"\u003cp\u003eThe \u003cstrong\u003eMultiflex S2 \/ LM-S-2 Steering Cable Support Bracket\u003c\/strong\u003e is a dual-position mounting assembly for one compatible mechanical steering cable. It is used where the steering cable cannot pass through a suitable engine tilt tube or where a conventional flat splashwell mounting arrangement does not suit the boat’s transom and splashwell geometry.\u003c\/p\u003e\n\u003cp\u003eThe S2 uses a raised 90° support bracket with two alternative mounting locations and an approximately \u003cstrong\u003e277mm threaded support tube\u003c\/strong\u003e. This allows the installer to choose the cable-support position that provides the best alignment with the outboard engine tiller and steering link arm.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eProduct Identification\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Multiflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ item code:\u003c\/strong\u003e S2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended supplier reference:\u003c\/strong\u003e LM-S-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct category:\u003c\/strong\u003e Mechanical steering cable support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative description:\u003c\/strong\u003e Raised splashwell or transom steering cable mounting bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable capacity:\u003c\/strong\u003e One mechanical steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket configuration:\u003c\/strong\u003e Raised 90° bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting options:\u003c\/strong\u003e Two alternative cable-support locations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport tube:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-reported support-tube length:\u003c\/strong\u003e 277mm \/ approximately 10.9in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-reported mounting pattern:\u003c\/strong\u003e 64 x 64mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-reported fixing holes:\u003c\/strong\u003e 4 x 7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary application:\u003c\/strong\u003e Outboard mechanical steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting area:\u003c\/strong\u003e Transom or splashwell structure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering type:\u003c\/strong\u003e Mechanical cable steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic steering component:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosest supplier-listed Ultraflex equivalent:\u003c\/strong\u003e S55 \/ 34744A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific steering cable models:\u003c\/strong\u003e Not officially listed by Multiflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum steering load:\u003c\/strong\u003e Not stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum engine horsepower:\u003c\/strong\u003e Not stated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is the Multiflex S2 Used For?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S2 supports the stationary outer section of a compatible mechanical steering cable near the outboard engine.\u003c\/p\u003e\n\u003cp\u003eWhen the steering wheel is turned:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe steering helm moves the inner steering cable.\u003c\/li\u003e\n\u003cli\u003eThe S2 holds the cable’s outer support section in position.\u003c\/li\u003e\n\u003cli\u003eThe cable output moves in a push-pull direction.\u003c\/li\u003e\n\u003cli\u003eA separately selected steering link arm transfers that movement to the outboard engine tiller.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe S2 can form part of a correctly specified:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutboard mechanical steering installation\u003c\/li\u003e\n\u003cli\u003eTransom-mounted steering cable arrangement\u003c\/li\u003e\n\u003cli\u003eSplashwell-mounted steering installation\u003c\/li\u003e\n\u003cli\u003eInstallation without a usable engine tilt tube\u003c\/li\u003e\n\u003cli\u003eInstallation where a conventional flat splashwell flange is unsuitable\u003c\/li\u003e\n\u003cli\u003eReplacement of a compatible raised steering cable bracket\u003c\/li\u003e\n\u003cli\u003eSteering system requiring two alternative cable-support positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is Included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe official Multiflex S2 product data do not publish a complete itemised contents list. Available supplier imagery shows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 x raised 90° support bracket with two mounting locations\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x threaded steering cable support tube\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2 x circular clamp or flange plates\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x articulated ball\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x protective cap or boot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x sealing O-ring\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting bolts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting nuts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFlat washers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLocking washers or retaining hardware\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the physical package before publishing a guaranteed loose-fastener quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included unless expressly stated:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMechanical steering cable\u003c\/li\u003e\n\u003cli\u003eSteering helm\u003c\/li\u003e\n\u003cli\u003eSteering wheel\u003c\/li\u003e\n\u003cli\u003eDashboard bezel\u003c\/li\u003e\n\u003cli\u003eEngine steering link arm\u003c\/li\u003e\n\u003cli\u003eEngine tiller arm\u003c\/li\u003e\n\u003cli\u003eSteering cable-to-engine connection kit\u003c\/li\u003e\n\u003cli\u003eHydraulic steering cylinder\u003c\/li\u003e\n\u003cli\u003eHydraulic hoses\u003c\/li\u003e\n\u003cli\u003eEngine-specific adaptor\u003c\/li\u003e\n\u003cli\u003eAdditional transom reinforcement\u003c\/li\u003e\n\u003cli\u003eOther installation-specific steering components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the S2 Hold Two Steering Cables?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The S2 supports \u003cstrong\u003eone mechanical steering cable\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe bracket provides two alternative mounting locations. These allow the articulated support tube to be installed through either bracket face, depending on the required cable height, offset and approach angle.\u003c\/p\u003e\n\u003cp\u003eThe S2 should therefore be described as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA dual-position steering cable support\u003c\/li\u003e\n\u003cli\u003eA two-location transom support bracket\u003c\/li\u003e\n\u003cli\u003eA raised 90° splashwell mounting bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Do the Two Mounting Positions Work?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S2 bracket has two perpendicular mounting faces.\u003c\/p\u003e\n\u003cp\u003eThe articulated tube and flange assembly can be positioned through the bracket face that provides the most suitable:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCable height\u003c\/li\u003e\n\u003cli\u003eDistance from the transom\u003c\/li\u003e\n\u003cli\u003eCable approach angle\u003c\/li\u003e\n\u003cli\u003eAlignment with the engine tiller\u003c\/li\u003e\n\u003cli\u003eLink-arm clearance\u003c\/li\u003e\n\u003cli\u003eSplashwell clearance\u003c\/li\u003e\n\u003cli\u003eEngine tilt clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnly one mounting location is used for the steering cable in a normal installation.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Are the Published S2 Dimensions?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport-tube length:\u003c\/strong\u003e 277mm \/ approximately 10.9in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting-hole pattern:\u003c\/strong\u003e 64 x 64mm \/ approximately 2.52 x 2.52in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of mounting holes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting-hole diameter:\u003c\/strong\u003e 7mm \/ approximately 0.28in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese measurements are supplier-published rather than shown on the current Multiflex S2 product page.\u003c\/p\u003e\n\u003cp\u003eThe available Multiflex data do not state:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport-tube outside diameter\u003c\/li\u003e\n\u003cli\u003eSupport-tube inside diameter\u003c\/li\u003e\n\u003cli\u003eTube thread diameter\u003c\/li\u003e\n\u003cli\u003eTube thread pitch\u003c\/li\u003e\n\u003cli\u003eBracket thickness\u003c\/li\u003e\n\u003cli\u003eExact cable offset at either mounting position\u003c\/li\u003e\n\u003cli\u003eMaximum articulation angle\u003c\/li\u003e\n\u003cli\u003eMaximum transom thickness\u003c\/li\u003e\n\u003cli\u003eProduct weight\u003c\/li\u003e\n\u003cli\u003eMaximum steering force\u003c\/li\u003e\n\u003cli\u003eMaximum engine horsepower\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Does the 12-16in Mounting Position Mean?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting surface:\u003c\/strong\u003e Normally perpendicular to the transom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance from centreline or tiller:\u003c\/strong\u003e 12-16in \/ approximately 305-406mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal splashwell width:\u003c\/strong\u003e 25-33in \/ approximately 635-838mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese measurements describe the manufacturer’s usual installation geometry. The final position must also provide correct cable alignment, full steering travel and unrestricted engine tilt movement.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Is the S2 Different From the Multiflex S1?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eMultiflex S1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConventional plate-style splashwell mounting kit\u003c\/li\u003e\n\u003cli\u003eMounts through a splashwell side or bulkhead\u003c\/li\u003e\n\u003cli\u003eStainless-steel mounting plates\u003c\/li\u003e\n\u003cli\u003eAluminium support tube\u003c\/li\u003e\n\u003cli\u003eSuitable where a flat through-bulkhead mounting surface is available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMultiflex S2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaised 90° support bracket\u003c\/li\u003e\n\u003cli\u003eTwo alternative mounting locations\u003c\/li\u003e\n\u003cli\u003eSupports the cable at different positions relative to the transom\u003c\/li\u003e\n\u003cli\u003eApproximately 277mm threaded support tube\u003c\/li\u003e\n\u003cli\u003eSuitable where through-tube steering or the normal splashwell arrangement is unsuitable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the S2 Equivalent to the Ultraflex S55?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSpecialist supplier listings pair the Multiflex S2 with the \u003cstrong\u003eUltraflex S55 \/ 34744A\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe S2 should be treated as the closest functional equivalent rather than a guaranteed dimensional replacement.\u003c\/p\u003e\n\u003cp\u003eBefore substitution, compare:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting-hole pattern\u003c\/li\u003e\n\u003cli\u003eFixing-hole diameter\u003c\/li\u003e\n\u003cli\u003eSupport-tube length\u003c\/li\u003e\n\u003cli\u003eSupport-tube thread\u003c\/li\u003e\n\u003cli\u003eCable retaining-nut thread\u003c\/li\u003e\n\u003cli\u003eBracket height\u003c\/li\u003e\n\u003cli\u003eCable offset\u003c\/li\u003e\n\u003cli\u003eLink-arm position\u003c\/li\u003e\n\u003cli\u003eSteering and tilt clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich Steering Cables Are Compatible?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe current Multiflex S2 product data do not identify a specific steering cable model.\u003c\/p\u003e\n\u003cp\u003eThe selected mechanical steering cable must:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePass through the S2 support tube\u003c\/li\u003e\n\u003cli\u003eAttach securely to the threaded support tube\u003c\/li\u003e\n\u003cli\u003eMove through its complete steering travel\u003c\/li\u003e\n\u003cli\u003eConnect to the engine through a compatible link arm\u003c\/li\u003e\n\u003cli\u003eOperate without excessive side loading\u003c\/li\u003e\n\u003cli\u003eMaintain the cable manufacturer’s minimum bend radius\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the cable make, model, retaining-nut thread, output-end design, travel, length and engine connection before ordering.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the S2 Replace an Engine Tilt Tube?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S2 provides an alternative steering cable support where a suitable engine tilt tube is unavailable or cannot be used.\u003c\/p\u003e\n\u003cp\u003eIt anchors the steering cable to the boat’s transom or splashwell structure. A separate steering link arm then connects the moving cable output to the engine tiller.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the S2 Include a Steering Link Arm?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo steering link arm is identified as part of the S2 supply.\u003c\/p\u003e\n\u003cp\u003eThe correct link arm must be selected according to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngine manufacturer and model\u003c\/li\u003e\n\u003cli\u003eSteering cable output end\u003c\/li\u003e\n\u003cli\u003eEngine tiller mounting point\u003c\/li\u003e\n\u003cli\u003eRequired arm length and offset\u003c\/li\u003e\n\u003cli\u003eMounting-bolt diameter\u003c\/li\u003e\n\u003cli\u003eSteering travel\u003c\/li\u003e\n\u003cli\u003eEngine tilt clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eCan the S2 Be Used with Hydraulic Steering?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The S2 is a mechanical steering cable support.\u003c\/p\u003e\n\u003cp\u003eIt is not a hydraulic steering cylinder mount, hydraulic hose bulkhead fitting, hydraulic tie bar or hydraulic engine bracket.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the S2 a Complete Steering System?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The Multiflex S2 is the steering cable support assembly only.\u003c\/p\u003e\n\u003cp\u003eA complete mechanical steering installation may also require:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteering wheel\u003c\/li\u003e\n\u003cli\u003eSteering helm\u003c\/li\u003e\n\u003cli\u003eDashboard bezel\u003c\/li\u003e\n\u003cli\u003eCorrectly measured steering cable\u003c\/li\u003e\n\u003cli\u003eS2 support bracket\u003c\/li\u003e\n\u003cli\u003eCompatible engine steering link arm\u003c\/li\u003e\n\u003cli\u003eEngine tiller connection\u003c\/li\u003e\n\u003cli\u003eEngine-specific mounting hardware\u003c\/li\u003e\n\u003cli\u003eSuitable transom or splashwell reinforcement\u003c\/li\u003e\n\u003cli\u003eCorrect steering and tilt clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eConstruction and Design\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMultiflex mechanical steering accessory\u003c\/li\u003e\n\u003cli\u003eModel S2\u003c\/li\u003e\n\u003cli\u003eExtended supplier reference LM-S-2\u003c\/li\u003e\n\u003cli\u003eRaised 90° steering cable support bracket\u003c\/li\u003e\n\u003cli\u003eTwo alternative support-tube mounting locations\u003c\/li\u003e\n\u003cli\u003eSupports one mechanical steering cable\u003c\/li\u003e\n\u003cli\u003eThreaded support tube\u003c\/li\u003e\n\u003cli\u003eSupplier-reported tube length of 277mm\u003c\/li\u003e\n\u003cli\u003eSupplier-reported 64 x 64mm mounting pattern\u003c\/li\u003e\n\u003cli\u003eFour supplier-reported 7mm mounting holes\u003c\/li\u003e\n\u003cli\u003eArticulated ball-and-flange support shown in product imagery\u003c\/li\u003e\n\u003cli\u003eProtective cap or boot shown in product imagery\u003c\/li\u003e\n\u003cli\u003eSealing O-ring shown in product imagery\u003c\/li\u003e\n\u003cli\u003eMounting fasteners shown in product imagery\u003c\/li\u003e\n\u003cli\u003eIntended for transom or splashwell mounting\u003c\/li\u003e\n\u003cli\u003eMounting surface normally perpendicular to the transom\u003c\/li\u003e\n\u003cli\u003eManufacturer mounting guidance of 12-16in from the centreline or tiller\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated total splashwell width of 25-33in\u003c\/li\u003e\n\u003cli\u003eNo hydraulic components\u003c\/li\u003e\n\u003cli\u003eNo electrical components\u003c\/li\u003e\n\u003cli\u003eNo steering cable included\u003c\/li\u003e\n\u003cli\u003eNo steering helm included\u003c\/li\u003e\n\u003cli\u003eNo steering link arm included\u003c\/li\u003e\n\u003cli\u003eBracket material not officially stated\u003c\/li\u003e\n\u003cli\u003eSupport-tube material not officially stated\u003c\/li\u003e\n\u003cli\u003eMaximum steering load not published\u003c\/li\u003e\n\u003cli\u003eMaximum engine horsepower not published\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eInstallation and Safety\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm that the product is the S2 \/ LM-S-2 support bracket\u003c\/li\u003e\n\u003cli\u003eConfirm that the installation requires a raised transom or splashwell support\u003c\/li\u003e\n\u003cli\u003eVerify that the bracket supports one steering cable\u003c\/li\u003e\n\u003cli\u003eConfirm compatibility with the selected steering cable\u003c\/li\u003e\n\u003cli\u003eCheck the cable retaining-nut and support-tube thread\u003c\/li\u003e\n\u003cli\u003eVerify the required steering cable length\u003c\/li\u003e\n\u003cli\u003eMaintain the cable manufacturer’s minimum bend radius\u003c\/li\u003e\n\u003cli\u003eCentre the engine before locating the bracket\u003c\/li\u003e\n\u003cli\u003ePosition the steering cable at approximately half travel\u003c\/li\u003e\n\u003cli\u003eSelect the bracket face that provides the correct cable height and offset\u003c\/li\u003e\n\u003cli\u003eConfirm alignment with the engine steering tiller\u003c\/li\u003e\n\u003cli\u003eConfirm compatibility with the selected steering link arm\u003c\/li\u003e\n\u003cli\u003eCheck the supplier-reported 64 x 64mm pattern before drilling\u003c\/li\u003e\n\u003cli\u003eMount the bracket to a rigid structural surface\u003c\/li\u003e\n\u003cli\u003eAdd suitable reinforcement where required\u003c\/li\u003e\n\u003cli\u003eDo not mount the bracket to a cracked or flexible panel\u003c\/li\u003e\n\u003cli\u003eUse suitable corrosion-resistant mounting fasteners\u003c\/li\u003e\n\u003cli\u003eSeat the articulated ball and flange components correctly\u003c\/li\u003e\n\u003cli\u003eEnsure the cable support tube is retained securely\u003c\/li\u003e\n\u003cli\u003eAvoid excessive side loading on the cable\u003c\/li\u003e\n\u003cli\u003eTurn the steering fully from port to starboard\u003c\/li\u003e\n\u003cli\u003eConfirm that the cable moves freely throughout its complete travel\u003c\/li\u003e\n\u003cli\u003eCheck that the engine reaches both steering positions without binding\u003c\/li\u003e\n\u003cli\u003eTilt the outboard fully upward and downward\u003c\/li\u003e\n\u003cli\u003eRepeat the steering check throughout the engine’s tilt range\u003c\/li\u003e\n\u003cli\u003eEnsure the cable, bracket and link arm do not contact the transom or splashwell\u003c\/li\u003e\n\u003cli\u003eRecheck the mounting fasteners after the initial test\u003c\/li\u003e\n\u003cli\u003eInspect the bracket, tube, ball and fasteners regularly\u003c\/li\u003e\n\u003cli\u003eReplace any bent, cracked, loose or excessively corroded component\u003c\/li\u003e\n\u003cli\u003eDo not operate the boat if the cable or support bracket binds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMarine steering is safety-critical. Installation should be completed according to the current Multiflex, steering-cable and engine instructions by a competent marine technician.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMultiflex S2 steering cable support bracket\u003c\/li\u003e\n\u003cli\u003eExtended supplier reference LM-S-2\u003c\/li\u003e\n\u003cli\u003eDual-position bracket for one steering cable\u003c\/li\u003e\n\u003cli\u003eTwo alternative tube mounting locations\u003c\/li\u003e\n\u003cli\u003eRaised 90° support design\u003c\/li\u003e\n\u003cli\u003eSuitable for compatible mechanical steering systems\u003c\/li\u003e\n\u003cli\u003eUsed where engine tilt-tube steering cannot be fitted\u003c\/li\u003e\n\u003cli\u003eSuitable where a conventional splashwell mount does not provide the required geometry\u003c\/li\u003e\n\u003cli\u003eThreaded steering cable support tube\u003c\/li\u003e\n\u003cli\u003eSupplier-reported tube length of 277mm\u003c\/li\u003e\n\u003cli\u003eSupplier-reported mounting pattern of 64 x 64mm\u003c\/li\u003e\n\u003cli\u003eFour supplier-reported 7mm mounting holes\u003c\/li\u003e\n\u003cli\u003eArticulated ball-and-flange support arrangement\u003c\/li\u003e\n\u003cli\u003eNormal mounting surface perpendicular to the transom\u003c\/li\u003e\n\u003cli\u003eManufacturer guidance of 12-16in from the centreline or tiller\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated total splashwell width of 25-33in\u003c\/li\u003e\n\u003cli\u003eSupplier-listed as the Multiflex equivalent to Ultraflex S55\u003c\/li\u003e\n\u003cli\u003eSupports one cable rather than two\u003c\/li\u003e\n\u003cli\u003eSteering cable supplied separately\u003c\/li\u003e\n\u003cli\u003eSteering helm supplied separately\u003c\/li\u003e\n\u003cli\u003eSteering wheel supplied separately\u003c\/li\u003e\n\u003cli\u003eEngine link arm supplied separately\u003c\/li\u003e\n\u003cli\u003eBracket and tube materials not officially stated\u003c\/li\u003e\n\u003cli\u003eExact cable compatibility not published\u003c\/li\u003e\n\u003cli\u003eMaximum steering load not published\u003c\/li\u003e\n\u003cli\u003eMaximum engine horsepower not published\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; min-width: 600px; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eS2 \/ LM-S-2\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMultiflex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eModel \/ Item Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eS2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eExtended Supplier Reference\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eLM-S-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eManufacturer Product Name\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eSplashwell Mounting Kit S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eProduct Category\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMechanical Steering Cable Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eAlternative Description\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eRaised Transom \/ Splashwell Steering Cable Support Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eCable Capacity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eOne Mechanical Steering Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMeaning of Dual Position\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eTwo Alternative Support-Tube Mounting Locations; Not Two Cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering System Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMechanical Cable Steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003ePrimary Application\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eOutboard Transom or Splashwell Steering Cable Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSuitable Where Tilt Tube Cannot Be Used\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSuitable Where Standard Splashwell Mount Is Unsuitable\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eYes, Subject to Installation Geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eBracket Configuration\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eRaised 90° Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Locations\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eTwo Alternative Bracket Faces \/ Positions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupplier Description\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eRaised Straight-Edge Splashwell Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupport Tube Design\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eThreaded Support Tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupplier-Reported Support-Tube Length\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e277mm \/ Approximately 10.9in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupport-Tube Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupport-Tube Thread\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eThread Size and Pitch Not Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupplier-Reported Mounting Pattern\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e64 x 64mm \/ Approximately 2.52 x 2.52in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eNumber of Mounting Holes\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupplier-Reported Mounting-Hole Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e7mm \/ Approximately 0.28in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Surface Orientation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNormally Perpendicular to the Transom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eManufacturer Centreline \/ Tiller Distance\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e12-16in \/ Approximately 305-406mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eManufacturer Total Splashwell Width\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e25-33in \/ Approximately 635-838mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eArticulated Ball\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eShown in Supplier Product Imagery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eCircular Clamp \/ Flange Plates\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eTwo Shown in Supplier Product Imagery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eProtective Cap \/ Boot\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eShown in Supplier Product Imagery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSealing O-Ring\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eShown in Supplier Product Imagery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Fasteners\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eShown; Exact Official Quantity Not Published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eBracket Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Officially Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupport-Tube Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Officially Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eClosest Supplier-Listed Ultraflex Equivalent\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eS55 \/ 34744A, Subject to Fitment Verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMultiflex S1 Difference\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eS2 Uses a Raised Two-Position Bracket Rather Than the Standard Plate-Style Splashwell Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSpecific Multiflex Steering Cable Models\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eM58 \/ M66 Compatibility\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMentioned by Specialist Supplier; Not Officially Confirmed by Multiflex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Cable Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Helm Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Wheel Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eEngine Link Arm Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eHydraulic Steering Component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Articulation Angle\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Steering Load\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Engine Horsepower\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eDirect-Fit Confirmation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eConfirm Cable Thread, Bracket Position, Mounting Pattern, Link Arm and Steering Clearance Before Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Multiflex","offers":[{"title":"Default Title","offer_id":64275668828537,"sku":"MA-LM-S-2","price":54.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/S2-Spashwell-Mounting.jpg?v=1787039093","url":"https:\/\/marinescene.co.uk\/products\/multiflex-s2-dual-steering-cable-transom-support-bracket","provider":"Marine Scene","version":"1.0","type":"link"}