{"product_id":"ultraflex-s55-90-transom-mount-steering-cable-support-bracket","title":"Ultraflex S55 90° Transom Mount Steering Cable Support Bracket","description":"\u003cp\u003eThe \u003cstrong\u003eUltraflex S55 \/ 34744A Steering Cable Support\u003c\/strong\u003e is a corrosion-resistant 90° mounting bracket designed to secure one compatible mechanical steering cable in the correct position for connection to a boat’s rudder. Its articulated ball-and-flange assembly can be installed at either \u003cstrong\u003e51mm or 89mm above the mounting surface\u003c\/strong\u003e, allowing the cable height to be matched to the rudder linkage and installation geometry.\u003c\/p\u003e\n\u003cp\u003eThe standard S55 uses an \u003cstrong\u003ealuminium support tube\u003c\/strong\u003e with stainless-steel flange components. The bracket mounts to a horizontal bulkhead or deck structure close to the rudder and uses a \u003cstrong\u003e64 x 64mm four-hole mounting pattern\u003c\/strong\u003e. The steering cable, rudder connection fitting and fasteners used to secure the bracket to the boat are supplied separately.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eProduct Identification\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Ultraflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e S55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer part number:\u003c\/strong\u003e 34744A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon catalogue code:\u003c\/strong\u003e 4-S55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct category:\u003c\/strong\u003e Mechanical steering cable support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative description:\u003c\/strong\u003e Square steering cable clamp block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rudder steering cable support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable capacity:\u003c\/strong\u003e One mechanical steering cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket configuration:\u003c\/strong\u003e 90° square support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting positions:\u003c\/strong\u003e Two alternative cable heights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower cable-support height:\u003c\/strong\u003e 51mm \/ approximately 2.01in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper cable-support height:\u003c\/strong\u003e 89mm \/ approximately 3.50in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting pattern:\u003c\/strong\u003e 64 x 64mm \/ approximately 2.52 x 2.52in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing holes:\u003c\/strong\u003e 4 x 7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport tube material:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-published tube length:\u003c\/strong\u003e 270mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-published tube diameter:\u003c\/strong\u003e 22mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting surface:\u003c\/strong\u003e Horizontal bulkhead, deck or equivalent rigid structure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering type:\u003c\/strong\u003e Mechanical cable steering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless-tube alternative:\u003c\/strong\u003e Ultraflex S55SS \/ 41553B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosest Multiflex functional equivalent:\u003c\/strong\u003e Multiflex S2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic steering component:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is the Ultraflex S55 Used For?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S55 supports the stationary outer section of a compatible mechanical steering cable near the boat’s rudder.\u003c\/p\u003e\n\u003cp\u003eWhen the steering wheel is turned:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe steering helm moves the steering cable’s inner output member.\u003c\/li\u003e\n\u003cli\u003eThe S55 holds the cable’s outer casing and support tube securely.\u003c\/li\u003e\n\u003cli\u003eThe moving cable output travels in a push-pull direction.\u003c\/li\u003e\n\u003cli\u003eA separately selected clevis, link arm or rudder connection transfers the movement to the rudder.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe S55 can form part of a correctly specified:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInboard mechanical steering system\u003c\/li\u003e\n\u003cli\u003eRudder steering installation\u003c\/li\u003e\n\u003cli\u003eHorizontal-bulkhead cable support\u003c\/li\u003e\n\u003cli\u003eBelow-deck steering cable installation\u003c\/li\u003e\n\u003cli\u003eReplacement of a compatible square cable-support bracket\u003c\/li\u003e\n\u003cli\u003eInstallation requiring a choice of two cable-support heights\u003c\/li\u003e\n\u003cli\u003eSteering system where the cable must be aligned with a rudder tiller or quadrant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Is Included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 x threaded support tube\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x ring nut\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x articulated ball\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2 x mounting flanges\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x 90° square support bracket\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 x M6 x 40mm screws\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 x elastic washers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 x M6 nuts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x drilling template\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included unless expressly stated:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMechanical steering cable\u003c\/li\u003e\n\u003cli\u003eSteering helm\u003c\/li\u003e\n\u003cli\u003eSteering wheel\u003c\/li\u003e\n\u003cli\u003eDashboard bezel\u003c\/li\u003e\n\u003cli\u003eRudder tiller arm\u003c\/li\u003e\n\u003cli\u003eSteering cable clevis\u003c\/li\u003e\n\u003cli\u003eRudder connection pin or bolt\u003c\/li\u003e\n\u003cli\u003eEngine steering link arm\u003c\/li\u003e\n\u003cli\u003eHydraulic steering components\u003c\/li\u003e\n\u003cli\u003eScrews, washers and nuts used to secure the bracket to the boat\u003c\/li\u003e\n\u003cli\u003eAdditional structural reinforcement\u003c\/li\u003e\n\u003cli\u003eOther installation-specific steering hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the S55 Hold One or Two Steering Cables?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S55 supports \u003cstrong\u003eone mechanical steering cable\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eDual mounting refers to two alternative cable-support positions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e51mm \/ 2.01in above the mounting surface\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e89mm \/ 3.50in above the mounting surface\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnly one position is used in a normal installation. The S55 is not a twin-cable or dual-station steering bracket.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Do the Two Mounting Heights Work?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe articulated tube and flange assembly can be fitted through either side opening in the square bracket.\u003c\/p\u003e\n\u003cp\u003eSelect the opening that provides the most suitable:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCable height\u003c\/li\u003e\n\u003cli\u003eRudder tiller alignment\u003c\/li\u003e\n\u003cli\u003eCable approach angle\u003c\/li\u003e\n\u003cli\u003eBelow-deck clearance\u003c\/li\u003e\n\u003cli\u003eLinkage movement\u003c\/li\u003e\n\u003cli\u003eSteering cable travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Are the S55 Mounting Dimensions?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting pattern:\u003c\/strong\u003e 64 x 64mm \/ approximately 2.52 x 2.52in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of fixing holes:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing-hole diameter:\u003c\/strong\u003e 7mm \/ approximately 0.27in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower cable-support height:\u003c\/strong\u003e 51mm \/ approximately 2.01in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper cable-support height:\u003c\/strong\u003e 89mm \/ approximately 3.50in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe available manufacturer data do not state the bracket thickness, maximum mounting-surface thickness, articulation angle, product weight or maximum steering load.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat Are the S55 Tube Dimensions?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-published tube length:\u003c\/strong\u003e 270mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier-published tube outside diameter:\u003c\/strong\u003e 22mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSome supplier catalogues state a 275mm tube length. The official installation manual does not publish the tube length, so check the physical product where the exact measurement is critical.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich Steering Cables Are Compatible?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe official S55 manual does not publish a definitive cable-model compatibility list. A specialist supplier lists the S55 for compatible Ultraflex M58 and M66 steering cables.\u003c\/p\u003e\n\u003cp\u003eBefore ordering, confirm:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteering cable manufacturer and model\u003c\/li\u003e\n\u003cli\u003eCable retaining-nut thread\u003c\/li\u003e\n\u003cli\u003eCable output-end design\u003c\/li\u003e\n\u003cli\u003eCable travel and length\u003c\/li\u003e\n\u003cli\u003eMinimum bend radius\u003c\/li\u003e\n\u003cli\u003eRudder tiller connection\u003c\/li\u003e\n\u003cli\u003eRequired clevis or linkage fitting\u003c\/li\u003e\n\u003cli\u003eComplete steering-system rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the S55 Intended for Rudder or Outboard Steering?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe S55 is primarily designed to position a mechanical steering cable for connection to a \u003cstrong\u003erudder\u003c\/strong\u003e. The official installation instructions show the cable attached to a rudder arm and the bracket mounted to a horizontal bulkhead.\u003c\/p\u003e\n\u003cp\u003eDo not assume that the S55 is suitable for an outboard splashwell installation without checking the complete steering arrangement.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the S55 the Ultraflex Equivalent of the Multiflex S2?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Ultraflex S55 is the closest functional counterpart to the Multiflex S2 used elsewhere in this project.\u003c\/p\u003e\n\u003cp\u003eBoth products use:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA raised 90° bracket\u003c\/li\u003e\n\u003cli\u003eOne articulated steering cable support tube\u003c\/li\u003e\n\u003cli\u003eTwo alternative cable-support positions\u003c\/li\u003e\n\u003cli\u003eA square mounting pattern\u003c\/li\u003e\n\u003cli\u003eA separate rudder or engine linkage fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompare the mounting pattern, tube dimensions, cable thread, support heights and steering geometry before treating them as interchangeable.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow Does the S55 Differ From the S55SS?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eUltraflex S55 \/ 34744A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete 90° rudder steering cable support\u003c\/li\u003e\n\u003cli\u003eAluminium support tube\u003c\/li\u003e\n\u003cli\u003eStainless-steel flange components\u003c\/li\u003e\n\u003cli\u003eStandard version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUltraflex S55SS \/ 41553B\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete 90° rudder steering cable support\u003c\/li\u003e\n\u003cli\u003eStainless-steel support tube\u003c\/li\u003e\n\u003cli\u003eStainless-steel flange construction\u003c\/li\u003e\n\u003cli\u003eStainless-tube alternative\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the S55 Include a Rudder Clevis or Link Arm?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The S55 supports the steering cable but does not include the separate component that connects the moving cable output to the rudder.\u003c\/p\u003e\n\u003cp\u003eA clevis, ball joint, eye end, threaded adaptor or rudder-specific linkage may be required.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eAre the Boat-Mounting Fasteners Included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The kit includes the M6 hardware used to assemble the flanges to the bracket. The fasteners used to secure the complete bracket to the boat are not included.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan the S55 Be Used with Hydraulic Steering?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The S55 is a mechanical steering cable support and is not a hydraulic cylinder bracket, hydraulic tie bar or hydraulic hose fitting.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the S55 a Complete Steering System?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. A complete mechanical rudder steering system may also require:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteering wheel\u003c\/li\u003e\n\u003cli\u003eMechanical steering helm\u003c\/li\u003e\n\u003cli\u003eDashboard bezel\u003c\/li\u003e\n\u003cli\u003eCorrectly measured steering cable\u003c\/li\u003e\n\u003cli\u003eS55 cable-support bracket\u003c\/li\u003e\n\u003cli\u003eRudder clevis or link arm\u003c\/li\u003e\n\u003cli\u003eRudder tiller\u003c\/li\u003e\n\u003cli\u003eStructural backing plate\u003c\/li\u003e\n\u003cli\u003eSuitable mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eConstruction and Design\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUltraflex S55 steering cable support\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 34744A\u003c\/li\u003e\n\u003cli\u003eCommon catalogue code 4-S55\u003c\/li\u003e\n\u003cli\u003eSquare 90° bracket construction\u003c\/li\u003e\n\u003cli\u003eDesigned for one mechanical steering cable\u003c\/li\u003e\n\u003cli\u003eIntended primarily for rudder steering\u003c\/li\u003e\n\u003cli\u003eTwo alternative cable-support heights\u003c\/li\u003e\n\u003cli\u003eLower position at 51mm\u003c\/li\u003e\n\u003cli\u003eUpper position at 89mm\u003c\/li\u003e\n\u003cli\u003eArticulated ball support\u003c\/li\u003e\n\u003cli\u003eTwo mounting flanges\u003c\/li\u003e\n\u003cli\u003eThreaded aluminium support tube\u003c\/li\u003e\n\u003cli\u003eStainless-steel flange components\u003c\/li\u003e\n\u003cli\u003eFour M6 x 40mm assembly screws\u003c\/li\u003e\n\u003cli\u003eFour elastic washers\u003c\/li\u003e\n\u003cli\u003eFour M6 nuts\u003c\/li\u003e\n\u003cli\u003e64 x 64mm mounting pattern\u003c\/li\u003e\n\u003cli\u003eFour 7mm mounting holes\u003c\/li\u003e\n\u003cli\u003eSupplier-published 270mm tube length\u003c\/li\u003e\n\u003cli\u003eSupplier-published 22mm tube diameter\u003c\/li\u003e\n\u003cli\u003eSteering cable supplied separately\u003c\/li\u003e\n\u003cli\u003eRudder connection supplied separately\u003c\/li\u003e\n\u003cli\u003eBoat-mounting fasteners supplied separately\u003c\/li\u003e\n\u003cli\u003eNo hydraulic or electrical components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eInstallation and Safety\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm that the installation requires a 90° rudder steering cable support\u003c\/li\u003e\n\u003cli\u003eVerify the exact S55 \/ 34744A product\u003c\/li\u003e\n\u003cli\u003eConfirm compatibility with the selected mechanical steering cable\u003c\/li\u003e\n\u003cli\u003eCheck the cable retaining-nut and support-tube thread\u003c\/li\u003e\n\u003cli\u003eConfirm the required cable length and travel\u003c\/li\u003e\n\u003cli\u003eMaintain the steering cable’s minimum bend radius\u003c\/li\u003e\n\u003cli\u003eAssemble the ball, flanges and ring nut in the correct order\u003c\/li\u003e\n\u003cli\u003eSelect the 51mm or 89mm support position\u003c\/li\u003e\n\u003cli\u003eSecure the flange assembly with the supplied M6 hardware\u003c\/li\u003e\n\u003cli\u003eInsert the steering cable and tighten its retaining nut securely\u003c\/li\u003e\n\u003cli\u003ePosition the steering cable at half stroke\u003c\/li\u003e\n\u003cli\u003eConnect the cable end to the rudder linkage\u003c\/li\u003e\n\u003cli\u003eUse this position to determine the bracket location\u003c\/li\u003e\n\u003cli\u003eUse the official 64 x 64mm drilling template\u003c\/li\u003e\n\u003cli\u003eConfirm the four 7mm fixing holes before drilling\u003c\/li\u003e\n\u003cli\u003eMount the bracket to a rigid horizontal structure\u003c\/li\u003e\n\u003cli\u003eInstall suitable backing or reinforcement where required\u003c\/li\u003e\n\u003cli\u003eUse corrosion-resistant boat-mounting fasteners\u003c\/li\u003e\n\u003cli\u003eAvoid excessive side loading on the cable\u003c\/li\u003e\n\u003cli\u003eConfirm that the articulated ball moves freely\u003c\/li\u003e\n\u003cli\u003eTurn the steering fully from port to starboard\u003c\/li\u003e\n\u003cli\u003eCheck that the cable completes its full travel without binding\u003c\/li\u003e\n\u003cli\u003eEnsure the rudder linkage does not contact surrounding equipment\u003c\/li\u003e\n\u003cli\u003eRecheck all fasteners after the initial test\u003c\/li\u003e\n\u003cli\u003eInspect the support regularly for corrosion, cracking or looseness\u003c\/li\u003e\n\u003cli\u003eDo not operate the boat if the cable or S55 bracket binds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMarine steering is safety-critical. Installation should be completed according to the current Ultraflex, steering-cable and boat instructions by a competent marine technician.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUltraflex S55 90° rudder steering cable support\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 34744A\u003c\/li\u003e\n\u003cli\u003eSupports one mechanical steering cable\u003c\/li\u003e\n\u003cli\u003eDual-position bracket does not mean dual cable\u003c\/li\u003e\n\u003cli\u003eDesigned primarily for rudder steering installations\u003c\/li\u003e\n\u003cli\u003eLower cable position at 51mm\u003c\/li\u003e\n\u003cli\u003eUpper cable position at 89mm\u003c\/li\u003e\n\u003cli\u003eArticulated ball-and-flange support\u003c\/li\u003e\n\u003cli\u003eAluminium support tube\u003c\/li\u003e\n\u003cli\u003eStainless-steel flange components\u003c\/li\u003e\n\u003cli\u003eSupplier-published tube length of 270mm\u003c\/li\u003e\n\u003cli\u003eSupplier-published tube diameter of 22mm\u003c\/li\u003e\n\u003cli\u003e64 x 64mm mounting pattern\u003c\/li\u003e\n\u003cli\u003eFour 7mm mounting holes\u003c\/li\u003e\n\u003cli\u003eFour M6 x 40mm assembly screws included\u003c\/li\u003e\n\u003cli\u003eFour elastic washers included\u003c\/li\u003e\n\u003cli\u003eFour M6 nuts included\u003c\/li\u003e\n\u003cli\u003eBoat-mounting hardware not included\u003c\/li\u003e\n\u003cli\u003eSuitable for compatible M58 and M66 cables according to supplier guidance\u003c\/li\u003e\n\u003cli\u003eClosest Ultraflex functional equivalent to the Multiflex S2\u003c\/li\u003e\n\u003cli\u003eS55SS available with a stainless-steel tube\u003c\/li\u003e\n\u003cli\u003eSteering cable and rudder linkage supplied separately\u003c\/li\u003e\n\u003cli\u003eNot intended for hydraulic steering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n\u003ctable class=\"spec-table\" style=\"width: 100%; min-width: 600px; border-collapse: collapse; font-family: Roboto, Arial, sans-serif; background: #ffffff; text-align: center;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eS55 \/ 34744A\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eBrand\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eUltraflex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eS55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e34744A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eCommon Catalogue Code\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4-S55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eProduct Category\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMechanical Steering Cable Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eAlternative Description\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eSquare Steering Cable Clamp Block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003ePrimary Application\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eRudder Steering Cable Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering System Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMechanical Cable Steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eCable Capacity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eOne Mechanical Steering Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMeaning of Dual Position\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eTwo Alternative Cable Heights; Not Two Steering Cables\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eBracket Configuration\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eSquare 90° Support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Surface\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eHorizontal Bulkhead, Deck or Equivalent Rigid Structure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eLower Cable-Support Height\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e51mm \/ Approximately 2.01in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eUpper Cable-Support Height\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e89mm \/ Approximately 3.50in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Pattern\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e64 x 64mm \/ Approximately 2.52 x 2.52in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eNumber of Boat-Mounting Holes\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eBoat-Mounting-Hole Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e7mm \/ Approximately 0.27in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupport Tube Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eFlange Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupplier-Published Tube Length\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e270mm; Some Catalogues State 275mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupplier-Published Tube Outside Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eTube Thread Diameter and Pitch\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eThreaded Support Tube\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e1 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eRing Nut\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e1 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eArticulated Ball\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e1 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMounting Flanges\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e2 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003e90° Support Bracket\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e1 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eFlange-to-Bracket Screws\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4 x M6 x 40mm Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eElastic Washers\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eM6 Assembly Nuts\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003e4 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eDrilling Template\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eIncluded in Installation Instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eBoat-Mounting Fasteners\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eOfficial Cable-Model List\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Published in the S55 Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSupplier-Listed Cable Compatibility\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eUltraflex M58 and M66, Subject to Fitment Verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eCable Position During Installation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eSet to Half Stroke Before Final Bracket Positioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Connection During Positioning\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eCable End Connected to Rudder Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eClosest Multiflex Functional Equivalent\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eMultiflex S2, Subject to Dimensional and Cable Verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eStainless-Tube Alternative\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eUltraflex S55SS \/ 41553B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Cable Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Helm Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eSteering Wheel Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eRudder Clevis \/ Link Arm Included\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eHydraulic Steering Component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Articulation Angle\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Steering Load\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eMaximum Rudder Load\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eNot Stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center; font-weight: 500;\"\u003eDirect-Fit Confirmation\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px; text-align: center;\"\u003eConfirm Cable Thread, Support Height, Mounting Pattern, Rudder Linkage and Steering Travel Before Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Ultraflex","offers":[{"title":"Default Title","offer_id":48377607618837,"sku":"AF-4-S55","price":70.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0773\/6151\/2725\/files\/4-S55.jpg?v=1719240363","url":"https:\/\/marinescene.co.uk\/products\/ultraflex-s55-90-transom-mount-steering-cable-support-bracket","provider":"Marine Scene","version":"1.0","type":"link"}