AZTRON COMET 49" Wakesurf Board

The AZTRON COMET 49" Wakesurf Board is a compact wakesurf-to-skim board for beginner and intermediate riders seeking a fast, loose feel behind a suitable wakesurf boat. Its 49-inch outline combines a wide deck, shallow fish tail, single-concave hull and twin-fin setup for speed, release and responsive surface turns.

The current AW-211 model uses a CNC-machined stringerless EPS core with compression-moulded fibreglass and epoxy construction. A two-section diamond-grooved EVA traction pad, raised tail kick and two removable 1.7-inch nylon fins are supplied with the board.

Product Identification

• Brand: AZTRON
• Product range: COMET
• Product name: AZTRON COMET 49" Wakesurf Board
• Manufacturer item number: AW-211
• Marine Scene SKU: MZ-56059
• Product category: Wakesurf-to-skim board
• Rider capacity: One rider
• Recommended rider weight: Up to 80kg / 180lb
• Length: 49in / 125cm
• Width: 21in / 53.3cm
• Board volume: 22.7 litres
• Board weight: Approx. 2.65kg
• Core: CNC-machined stringerless EPS foam
• Construction: Compression-moulded fibreglass and epoxy composite
• Tail: Shallow fish tail
• Hull: Single concave
• Fin configuration: Two removable 1.7in nylon wakesurf fins
• Quantity supplied: One board and two fins

What Is the AZTRON COMET Used For?

The COMET is designed for wakesurfing on the shaped wake of a suitable purpose-built towboat. Its compact skim-influenced outline is intended for riders learning wakesurf technique and for riders developing surface spins, quick pivots and skate-style manoeuvres.

Use the board only behind a boat specifically designed and approved for wakesurfing, with the propeller safely isolated from the rider. Follow the boat manufacturer's operating instructions and local navigation rules.

What Is Included?

• One AZTRON COMET AW-211 wakesurf board
• Two removable 1.7-inch nylon wakesurf fins
• Factory-fitted two-section EVA traction pad
• Integrated raised tail-kick pad

What Is Not Included?

• Wakesurf rope and handle
• Personal flotation device or impact vest
• Board bag
• Replacement fins or fin hardware
• Towboat, ballast or wake-shaping equipment
• Instruction or supervision

Who Is the COMET 49 Designed For?

AZTRON positions the COMET as a wakesurf-to-skim board for beginner and intermediate riders. The current manufacturer recommendation is for riders weighing up to approximately 80kg.

Rider weight is only one selection factor. Boat wake size, rider height, skill level, preferred riding style and desired board looseness also affect suitability.

What Does the 22.7-Litre Volume Mean?

The 22.7-litre figure describes the board's three-dimensional volume, not a liquid capacity. It is calculated from the overall outline, thickness, rails, nose, tail and bottom contours.

More board volume generally increases flotation and paddling support, while lower volume can produce a more direct, skate-like feel. Volume does not equal maximum rider weight; the board shape, wake speed, rider skill and manufacturer recommendation must also be considered.

How Does the COMET Ride?

• Wakesurf-to-skim outline: Produces a loose, responsive feel suited to surface manoeuvres.
• Wide deck: Adds standing area and supports balance during take-off and recovery.
• Single-concave hull: Directs water beneath the board to support speed and hold through turns.
• Shallow fish tail: Helps the tail release during pivots, spins and aerial attempts.
• Twin-fin configuration: Supports speed down the line while retaining a freer feel than a larger tri-fin setup.

Construction and Design

• Compression-moulded composite construction
• Fibreglass and epoxy outer structure
• CNC-machined stringerless EPS foam core
• Single-concave bottom profile
• Wide 49 × 21in outline
• Shallow fish-tail design
• Two-section EVA traction deck
• Raised rear tail kick
• Removable twin-fin system
• AZTRON COMET artwork

How Does the EVA Traction Pad Help?

The top deck uses machined diamond-grooved EVA sections to provide grip between the rider and board. The rear pad incorporates a raised tail kick that gives the back foot a reference point during turns and surface tricks.

The deck pad should be kept clean and free from oil, sunscreen residue and loose sand that could reduce grip.

How Should the Twin Fins Be Set Up?

• Install both 1.7-inch fins in their designated positions before use.
• Check that each fin sits fully in its box and is secured with the correct hardware.
• Do not overtighten screws or force misaligned threads.
• Inspect the fins and fixing points before each session.
• Remove sand and debris before installation or removal.
• Replace cracked, distorted or loose fins before riding.

Safety and Use

• Wear a correctly fitted personal flotation device or impact vest suitable for wakesurfing.
• Use only behind a boat specifically designed and approved for wakesurfing.
• Keep clear of the propeller, swim platform and exhaust outlets.
• Use a competent driver and a separate observer where required.
• Start at low speed and follow the towboat manufacturer's wakesurfing guidance.
• Inspect the board, fins and traction pad before use.
• Do not exceed the manufacturer's recommended rider weight.
• Keep away from swimmers, docks, shallow water and other vessels.
• Follow local rules governing towing and wakesports.

Care and Storage

• Rinse the board and fins with fresh water after use, particularly after saltwater sessions.
• Remove the fins before transport where they may be struck or bent.
• Allow the board to dry before placing it in a closed bag.
• Store in a shaded, ventilated location away from excessive heat.
• Do not leave the board inside a hot vehicle for prolonged periods.
• Avoid dragging the underside across concrete, gravel or sharp surfaces.
• Inspect the composite shell, fin boxes and traction pad regularly.
• Repair impact damage before water can reach the EPS core.

Key Features

• AZTRON AW-211 COMET model
• 49in / 125cm wakesurf-to-skim outline
• 22.7-litre board volume
• Approx. 2.65kg board weight
• Recommended for riders up to 80kg
• Compression-moulded fibreglass and epoxy construction
• Stringerless CNC-machined EPS core
• Single-concave hull
• Shallow fish tail
• Diamond-grooved EVA traction deck
• Raised tail kick
• Two removable 1.7-inch nylon fins included

Frequently Asked Questions

Is the AZTRON COMET suitable for beginners?
Yes. AZTRON positions it for beginner and intermediate wakesurf riders, although instruction and competent boat operation remain important.

What rider weight is recommended?
The current manufacturer recommendation is up to approximately 80kg.

What does 22.7 litres mean?
It is the board's calculated volume, not a liquid capacity or direct weight rating.

Are the fins included?
Yes. Two removable 1.7-inch nylon wakesurf fins are included.

Does the board include a rope?
No. A suitable wakesurf rope and handle must be obtained separately.

Is the COMET a surf-style or skim-style board?
It is a wakesurf-to-skim design with a loose, skate-like feel and a fish tail intended to release readily during turns and spins.

Can it be used behind any motorboat?
No. Use it only behind a boat specifically designed and approved for wakesurfing, with the propeller safely isolated from the rider.

Specifications

Select the board according to rider weight, skill level, wake size and preferred riding style. Use only behind a purpose-designed wakesurf boat with the propeller safely isolated from the rider.

Select the board according to rider weight, skill level, wake size and preferred riding style. Use only behind a purpose-designed wakesurf boat with the propeller safely isolated from the rider.