Coast TX10 LED Quad Colour Torch - 80 Lumens

The COAST TX10 is a four-colour led inspection torch delivering up to 80 lumens white output. It is designed for portable inspection, maintenance, outdoor and emergency lighting where a dependable handheld beam is required.

Its power system, beam control and output modes allow the light to be matched to close-range tasks, general navigation and longer-distance illumination. Select the mode required for the task rather than using maximum output continuously.

Product Identification

• Brand: COAST
• Model: TX10
• Marine Scene SKU: NC-5746
• Product category: Four-colour LED inspection torch
• Maximum output: 80 lumens white output
• Power source: 3 × AAA alkaline batteries
• Beam system: MAX BEAM multi-reflector fixed beam
• Quantity supplied: One torch

What Is the COAST TX10 Used For?

The TX10 is intended for the following applications:

• Boat and vehicle inspection
• Engine-room, locker and bilge checks
• Night-time walking and outdoor use
• Workshop, maintenance and emergency lighting

What Is Included?

• One COAST TX10 torch
• 3 × AAA alkaline batteries

What Is Not Included?

• Replacement batteries
• Charging equipment
• Holster

How Do I Select the Correct Mode or Beam?

Choose the light setting according to distance, required runtime and the amount of reflected glare in the working area.

• Output: Use maximum output for short periods when maximum reach or visibility is required.
• Beam pattern: MAX BEAM multi-reflector fixed beam
• Published maximum runtime: Approx. 9 hours 45 minutes

Power, Charging and Runtime

• Power source: 3 × AAA alkaline batteries
• Maximum published runtime: Approx. 9 hours 45 minutes
• Use only the battery type specified for the model.
• Do not mix rechargeable and disposable cells in the same battery compartment.
• Keep charging ports and battery compartments clean and dry.
• Allow a wet light to dry before opening a battery compartment or connecting a charger.

Beam and Light Modes

• Modes: Independent white, red, green and blue light switches
• Beam system: MAX BEAM multi-reflector fixed beam

Construction and Design

• Four separate LED colours
• Direct colour selection without cycling
• Compact square-section body
• Size: 100 × 26 × 26mm
• Weight: 85g including batteries

Use and Safety

• Do not look directly into the LED or aim the beam at another person’s eyes.
• Use lower output at close range or around reflective surfaces.
• Do not leave the light operating unattended beneath fabric or in an enclosed space where heat can build up.
• Check the product and power source before relying on it for emergency use.

Care and Maintenance

• Wipe the housing and lens with a soft damp cloth.
• Rinse with fresh water after exposure to salt spray and dry thoroughly.
• Keep charging contacts, seals and battery terminals clean.
• Inspect straps, clips, hinges, magnets and mounting points for damage.
• Store in a cool, dry location away from direct heat and prolonged sunlight.
• Recharge rechargeable models before extended storage and check them periodically.
• Replace damaged cells or components rather than using an unreliable light.

Key Features

• Maximum output: 80 lumens white output
• Four separate LED colours
• Direct colour selection without cycling
• Compact square-section body
• Power: 3 × AAA alkaline batteries

Frequently Asked Questions

What is the maximum output of the TX10?
80 lumens white output

Which power source does it use?
3 × AAA alkaline batteries.

Can the beam be adjusted?
The beam system is MAX BEAM multi-reflector fixed beam.

Should maximum output be used continuously?
Use the lowest setting that safely illuminates the task. Lower settings reduce glare, heat and battery use.

What is included?
Only the items listed under “What Is Included?” are supplied.

Specifications

Published output, beam distance and runtime are measured under controlled conditions. Actual performance varies with the selected mode, battery condition, temperature and operating environment.

Published output, beam distance and runtime are measured under controlled conditions. Actual performance varies with the selected mode, battery condition, temperature and operating environment.