Hempel Broads Self-Polishing Antifouling Paint - 2.5 Litre

Hempel Broads 76111 is a self-polishing antifouling for glass fibre, wood, plywood and steel hulls used below the waterline. It provides season-long fouling protection for boats operating at cruising speeds; the vessel’s normal, continuous operating speed rather than maximum performance speed. It is not suitable for aluminium or light-alloy metals.

Hempel Broads 76111 is a self-polishing antifouling coating developed for protecting underwater hull surfaces from marine growth throughout the boating season. Its formulation is designed to maintain antifouling performance during normal cruising operation.

Suitable for properly prepared glass fibre, wood, plywood and steel, it is intended for exterior use below and around the waterline. It must not be applied to aluminium or light-alloy metals due to corrosion risk when copper-based coatings are in direct contact.

The coating can be applied by brush, roller or paint pad. Apply two coats as standard, with an additional coat recommended on leading edges, rudders and areas of high wear. Use Hempel’s Thinner 08080 when required, up to a maximum of 5%.

Key Features

• Self-polishing marine antifouling coating
• Provides all-season fouling protection
• Maintains performance at cruising speeds
• Good mechanical strength and coating durability
• Good colour retention throughout the season
• Suitable for glass fibre, wood, plywood and steel
• For exterior use below and around the waterline
• Not suitable for aluminium or light-alloy metals
• Theoretical coverage of 13m² per litre
• Apply by brush, roller or paint pad
• Use Hempel’s Thinner 08080 (max. 5%)
• Recommended application of two coats, plus extra on high-wear areas
• Surface dry in approximately 4 hours at 20°C

Frequently Asked Questions

What is Hempel Broads 76111 used for?
It is used as an antifouling coating to protect underwater hull surfaces from marine growth during the boating season.

What does cruising speed mean?
Cruising speed is the boat’s normal, continuous operating speed used during regular passage-making, rather than its maximum or racing speed.

Is Hempel Broads suitable for high-speed boats?
Hempel Broads is intended for boats operating at normal cruising speeds. Check the vessel’s operating profile and the current Hempel product data before using it on high-performance or racing craft.

What surfaces can it be applied to?
It is suitable for properly prepared glass fibre, wood, plywood and steel hulls. It must not be used on aluminium or light-alloy metals.

Is it suitable for all boats?
It is designed for vessels operating at cruising speeds and is suitable for general recreational marine use.

How much area does it cover?
The theoretical spreading rate is 13m² per litre. Actual coverage will vary depending on surface condition and application method.

Which thinner should be used?
Use Hempel’s Thinner 08080 when required, with a maximum thinning of 5%.