Jabsco Electric Toilet Conversion Kit

Suitable for use in above or below waterline installations. This simple-to-install kit replaces the pump on a Jabsco Manual Toilet with an electric pump, using the same hose.

It comes ready to fit directly in place of the existing pump. Its spring return knob has two positions, one for bowl emptying and the other for emptying and flushing.

• Directly replaces manual pump assembly
• Easy to Install
• Simple to operate
• Fits all Jabsco and Par 29090 and 29120 standard and large bowl toilets,  left and right-handed installations.
• Built-in macerator with stainless steel chopper plate
• Meets ISO 8846 MARINE and USCG 183.410 for Ignition protection
• Self priming up to 0.6m(2ft)
• Waste pump discharges over an anti syphon loop up to 1.8m(6ft) and out of a through hull fitting down to 0.9m(3ft) below the surface
• Simple rotary control for ‘flush & discharge’ or ‘discharge only’
• Self-priming pumps permit installation above or below waterline
• Manual pump easy to refit if power supply fails
• Noise - This unit runs with a characteristic ‘buzz’
• Connections: - for 19mm (¾”) bore inlet hose. Uses existing discharge elbow and outlet hose on manual pump

Electric Toilet Conversion Kit 12v - Specifications: 

• Dimensions: - 270mm high, 87mm wide, 150mm deep
• Voltage: 12 (VAC)
• Amp Draw : 24 (amp)
• Fuse Size: 25 (amp)
• Typical power consumption is less than 1.0 amp hour 

Electric Toilet Conversion Kit 24v - Specifications:

• Dimensions: - 270mm high, 87mm wide, 150mm deep
• Voltage: 24 (VAC)
• Amp Draw : 13 (amp)
• Fuse Size: 15 (amp)
• Typical power consumption is less than 0.5 amp hour