Jabsco Maxi Puppy 3000 23610 Series Freshwater Impeller Pump - 45 LPM

The Jabsco Maxi Puppy 3000 is a continuous-rated bronze flexible-impeller pump delivering up to 45 LPM, with 12V and 24V models.

It is designed for bilge pumping, livewell circulation, bait-tank draining, washdown, oil changing and compatible general transfer duties. The bronze body and nitrile impeller provide a serviceable positive-displacement pump head.

Product Identification

• Brand: Jabsco
• Product name: Jabsco Maxi Puppy 3000 23610-Series Flexible-Impeller Pump
• Model / part number: 23610-3003, 23610-3103
• Marine Scene SKU: CW-23610-3003, CW-23610-3103
• Product category: Continuous-rated flexible-impeller utility and bilge pump
• Quantity supplied: One selected product or kit

What Is the Maxi Puppy 3000 Used For?

It provides high-capacity self-priming liquid transfer for marine and industrial applications within the pump material and duty limits.

What Is Included?

• One Maxi Puppy 3000 pump in the selected voltage
• Installed nitrile impeller
• Rubber mounting grommets
• Installation instructions

What Is Not Included?

• Hose or pipework, clips and through-hull fittings
• Circuit-protection fuse or breaker
• Cable extensions and waterproof electrical connectors
• Control switch unless specifically listed as included

Which Products or Systems Is This Compatible With?

• 12V or 24V DC systems according to model
• 25 mm hose or 1/2 in BSP pipe connections
• Compatible water, bilge water and other approved liquids
• Applications requiring up to 45 LPM and continuous-rated motor operation

How Do I Select the Correct Model or Confirm Compatibility?

• Choose 23610-3003 for 12V or 23610-3103 for 24V
• Provide 25A or 15A fuse protection as specified
• Confirm nitrile compatibility with the liquid
• Do not use for petrol or fluids with a flash point below 37°C

Construction and Design

• Bronze flexible-impeller pump body
• Oil-resistant nitrile impeller
• Stainless-steel shaft
• Continuous-rated permanent-magnet motor
• Serviceable end-cover design

Installation and Safety

Isolate the electrical supply before installation. Match the pump to the vessel voltage, use the specified circuit protection and cable size, keep electrical joints dry and accessible, and support all connected hose or pipework. Follow the Jabsco installation instructions for mounting orientation, priming and duty cycle.

Maintenance

Inspect the pump, wiring, fuse, ports and connected pipework regularly. Clean any inlet strainer, investigate reduced flow or repeated fuse failure, and replace worn seals, diaphragms or impellers with the correct Jabsco service parts.

Key Features

• Up to 45 LPM flow
• 12V and 24V variants
• Self-primes to 2.4 m
• 25 mm hose connections
• Continuous-rated motor
• ISO 8846 and ISO 8849 compliance

Frequently Asked Questions

Can it be mounted vertically?
Yes, provided the motor is above the pump head and the installation follows the Jabsco instructions.

Can it pump petrol?
No. Do not use for petrol or other liquids with a flash point below 37°C.

How do I know whether this part is compatible?
Match the exact Jabsco model or part number first, then confirm the connection size, voltage, dimensions and application shown in the specification table.

Are installation accessories included?
Only the components listed under “What Is Included?” are supplied. Hose, wiring, fittings, switches and fasteners are excluded unless stated otherwise.

Specifications

The stated 45 LPM is a nominal maximum; installed output falls as differential pressure and pipe losses increase.