Jabsco Water Puppy 2000 Bilge & Deckwash Pump

The Jabsco Water Puppy 2000 is a non-automatic, self-priming flexible-impeller pump for bilge and deckwash duties, available for 12V or 24V systems with 25 mm hose connections.

Its bronze pump body and serviceable impeller head provide strong suction for intermittent bilge pumping, deck washing and compatible water transfer. A separate switch is required for automatic bilge control.

Product Identification

• Brand: Jabsco
• Product name: Jabsco Water Puppy 2000 Bilge and Deckwash Pump
• Model / part number: 23680-4003, 23680-4103
• Marine Scene SKU: CW-23680-4003, CW-23680-4103
• Product category: Flexible-impeller bilge and deckwash pump
• Quantity supplied: One selected product or kit

What Is the Jabsco Water Puppy 2000 Used For?

It is used for bilge drainage, deck washing and general water transfer where a self-priming remote pump is required.

What Is Included?

• One Water Puppy 2000 pump in the selected voltage
• Factory-fitted electrical leads
• Flexible impeller installed in the pump

What Is Not Included?

• Hose or pipework, clips and through-hull fittings
• Circuit-protection fuse or breaker
• Cable extensions and waterproof electrical connectors
• Control switch unless specifically listed as included

Which Products or Systems Is This Compatible With?

• 12V or 24V DC systems according to model
• 25 mm (1 in) hose or 1/2 in BSP female pipe connections
• Manual switching or a suitably rated automatic bilge control
• Compatible water and bilge-water applications

How Do I Select the Correct Model or Confirm Compatibility?

• Choose 23680-4003 for 12V or 23680-4103 for 24V
• Allow for 15A fuse protection on 12V and 10A on 24V
• Use 25 mm hose throughout the discharge path
• Confirm the expected output at the actual discharge head

Construction and Design

• Bronze flexible-impeller pump head
• Stainless-steel shaft
• Serviceable nitrile impeller
• DC motor for intermittent marine duty

Installation and Safety

Isolate the electrical supply before installation. Match the pump to the vessel voltage, use the specified circuit protection and cable size, keep electrical joints dry and accessible, and support all connected hose or pipework. Follow the Jabsco installation instructions for mounting orientation, priming and duty cycle.

Maintenance

Inspect the pump, wiring, fuse, ports and connected pipework regularly. Clean any inlet strainer, investigate reduced flow or repeated fuse failure, and replace worn seals, diaphragms or impellers with the correct Jabsco service parts.

Key Features

• 12V and 24V versions
• Self-primes to approximately 1.2 m
• 25 mm hose connections
• Non-automatic remote pump design
• ISO 8846 ignition protected
• ISO 8849 marine bilge-pump compliance

Frequently Asked Questions

Is this an automatic bilge pump?
No. Add a correctly rated float switch or control system where automatic operation is required.

What replacement impeller is listed?
The source listing specifies Jabsco 6303-0001-P; confirm against the pump service documentation before ordering.

How do I know whether this part is compatible?
Match the exact Jabsco model or part number first, then confirm the connection size, voltage, dimensions and application shown in the specification table.

Are installation accessories included?
Only the components listed under “What Is Included?” are supplied. Hose, wiring, fittings, switches and fasteners are excluded unless stated otherwise.

Specifications

Flow ratings reduce with head, hose length, bends and voltage drop.