Skip to product information
1 of 7

Lenco Standard Mount Trim Tab Kit Without Switch - 12V

Lenco Standard Mount Trim Tab Kit Without Switch - 12V

SKU: AF-4-46528

The Lenco Standard Mount Trim Tab Kit is a 12V electric trim-tab system supplied without a control switch. This combined range includes standard 304 stainless-steel and electro-polished blade finishes in sizes from 9 x 9 inches to 12 x 12 inches.

Regular price £595.98
Regular price Sale price £595.98
Sale Sold out
Tax included. Shipping calculated at checkout.
Style
Size

Delivery available  |  lead times vary

Collection available  |  usually ready in 2-4 days

Description

The Lenco Standard Mount Trim Tab Kit is a 12V electric trim-tab system supplied without a control switch. This combined range includes standard 304 stainless-steel and electro-polished blade finishes in sizes from 9 x 9 inches to 12 x 12 inches.

Each selected kit contains two trim-tab blades, two Lenco 15054-001 actuators, two 20 ft extension harnesses, upper and lower mounting brackets, installation instructions and stainless-steel mounting hardware. Select the finish and tab size that match the vessel, transom space and intended control system.

Product Identification

  • Brand: Lenco
  • Product range: 100 Series Standard Mount Trim Tab Kits
  • Product category: Electric marine trim-tab kit
  • Supply voltage: 12V DC
  • Available finishes: Standard stainless steel or electro-polished stainless steel
  • Available sizes: 9 x 9, 9 x 12, 9 x 18, 9 x 24 and 12 x 12 inches
  • Actuator type: Lenco 101 Standard actuator
  • Control switch included: No
  • Quantity supplied: One complete two-tab kit in the selected finish and size

What Is the Lenco Standard Mount Trim Tab Kit Used For?

The kit adds electrically operated trim tabs to a compatible powerboat. Independent port and starboard tab movement allows the helmsman to adjust running attitude, compensate for uneven loading and reduce excessive bow rise when the system is installed and operated correctly.

  • Centre-console fishing boats
  • Cuddy-cabin cruisers
  • Sports boats and other compatible planing powerboats
  • New installations using a separately selected Lenco 100 Series control switch
  • Replacement installations where the transom layout and component compatibility have been confirmed

Which Variants Are Available?

  • 15000-101: Standard finish, 9 x 9 inches, general guide for 14–18 ft boats
  • 15001-101: Standard finish, 9 x 12 inches, general guide for 16–25 ft boats
  • 15002-101: Standard finish, 9 x 18 inches, general guide for 22–30 ft boats
  • 15003-101: Standard finish, 9 x 24 inches, general guide for 26–40 ft boats
  • 15007-101: Standard finish, 12 x 12 inches, general guide for 17–30 ft boats
  • 15113-101: Electro-polished finish, 9 x 12 inches, general guide for 16–25 ft boats
  • 15114-101: Electro-polished finish, 12 x 12 inches, general guide for 17–30 ft boats

What Is Included?

  • Two 12-gauge 304 stainless-steel trim-tab blades in the selected size and finish
  • Two Lenco 15054-001 12V actuators with 6 ft (1.8 m) leads and waterproof Deutsch connectors
  • Two Lenco 30133-103 actuator extension harnesses, each 20 ft (6.1 m) long
  • Two Lenco 15085-001 upper mounting brackets with gland seal
  • Two Lenco 50014-001 lower mounting brackets
  • Lenco owner and installation manual
  • Stainless-steel mounting hardware supplied with the kit

What Is Not Included?

  • Trim-tab control switch or keypad
  • Automatic levelling control
  • Additional cable extensions
  • Boat-specific backing plates, sealant or transom reinforcement
  • Electrical circuit protection, cable extensions or connectors not supplied with the kit

How Do I Select the Correct Variant?

Use the published boat-length range as an initial guide only. Final selection must also account for hull design, engine arrangement, available transom width, strakes, chines, swim platforms, through-hull fittings and the minimum vertical space required for the actuator.

  • Confirm that the vessel uses a 12V DC electrical system.
  • Measure the available span and chord area on both sides of the transom.
  • Keep the blades clear of drives, propellers, steps, strakes and underwater fittings.
  • Check the required hinge height and minimum 14 in (35.6 cm) transom height.
  • Select standard finish for the standard 304 stainless-steel blade or electro-polished finish for a mirror finish and additional corrosion resistance.
  • Choose a compatible Lenco 100 Series control switch separately.

What Is the Difference Between Standard and Electro-Polished Blades?

Both finishes use 12-gauge 304 stainless-steel blades. Electro-polishing produces a brighter, smoother surface and provides additional corrosion protection. It does not change the operating voltage, actuator type or requirement for a separate control switch.

Construction and Design

  • Blade material: 12-gauge (approximately 2.7 mm) laser-cut 304 stainless steel
  • Trailing edge: 5/8 in (1.6 cm) flared edge
  • Hinge pin: 1/8 in (3.2 mm) diameter
  • Actuators: Two Lenco 101 Standard electric actuators
  • Connections: Waterproof plug-and-play Deutsch connectors
  • Mounting brackets: Corrosion-resistant upper and lower brackets
  • System voltage: 12V DC

Installation and Safety

Trim-tab installation requires accurate transom measurement, drilling, sealing and marine electrical work. Follow the current Lenco installation manual and the vessel manufacturer’s guidance.

  • Disconnect the vessel battery before electrical installation.
  • Dry-fit both blades and actuators before drilling.
  • Use a suitable marine sealant on all transom penetrations.
  • Route cables away from heat, sharp edges and moving equipment.
  • Use correctly rated circuit protection and a compatible control switch.
  • Confirm full actuator movement without interference before launching.
  • Test port and starboard control directions at low speed before normal operation.

Maintenance

  • Rinse blades and external hardware with fresh water after saltwater use.
  • Inspect blades, hinges, brackets, cables and fasteners regularly.
  • Remove marine growth that could restrict tab movement.
  • Check transom seals and cable glands for leakage.
  • Replace damaged blades, brackets, wiring or actuators before further use.

Key Features

  • Seven selectable 12V variants in one listing
  • Standard and electro-polished 304 stainless-steel finishes
  • Two Lenco 15054-001 actuators supplied with each kit
  • 20 ft extension harnesses and Deutsch connectors
  • Standard Mount transom installation
  • Sizes for a broad range of compatible planing boats
  • Switch sold separately for control-system choice

Frequently Asked Questions

Is a trim-tab switch included?
No. Every variant in this listing is supplied without a switch.

Are the electro-polished kits mechanically different?
The principal difference is the blade finish. The kits use the same 12V 15054-001 actuator type and standard mounting arrangement.

Can I select the kit from boat length alone?
No. Boat length is only a guide. Confirm transom clearance, hull layout, engine position and actuator mounting height.

Are the 9 x 18 and 9 x 24 variants 230 mm wide?
Yes. Their nominal 9-inch chord is approximately 229 mm. The corresponding spans are approximately 457 mm and 610 mm.

Can these kits be connected to a 24V system?
No. The variants in this listing use 12V actuators and controls.

Standard-Finish Specifications

Specification 15000-101 15001-101 15002-101 15003-101 15007-101
Finish Standard Standard Standard Standard Standard
Tab size 9 x 9 in 9 x 12 in 9 x 18 in 9 x 24 in 12 x 12 in
Approx. metric size 229 x 229 mm 229 x 305 mm 229 x 457 mm 229 x 610 mm 305 x 305 mm
Recommended boat length 14–18 ft (4.3–5.5 m) 16–25 ft (4.9–7.6 m) 22–30 ft (6.7–9.1 m) 26–40 ft (7.9–12.2 m) 17–30 ft (5.2–9.1 m)
Hinge height 2 in (5.1 cm) 2 in (5.1 cm) 2 in (5.1 cm) 1 in (2.5 cm) 2 in (5.1 cm)
Minimum transom height 14 in (35.6 cm) 14 in (35.6 cm) 14 in (35.6 cm) 14 in (35.6 cm) 14 in (35.6 cm)
Voltage 12V DC 12V DC 12V DC 12V DC 12V DC
Actuators 2 x 15054-001 2 x 15054-001 2 x 15054-001 2 x 15054-001 2 x 15054-001
Extension harnesses 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m)
Upper brackets 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal
Lower brackets 2 x 50014-001 2 x 50014-001 2 x 50014-001 2 x 50014-001 2 x 50014-001
Switch included No No No No No

Electro-Polished Specifications

Specification 15113-101 15114-101
Finish Electro-polished Electro-polished
Tab size 9 x 12 in 12 x 12 in
Approx. metric size 229 x 305 mm 305 x 305 mm
Recommended boat length 16–25 ft (4.9–7.6 m) 17–30 ft (5.2–9.1 m)
Hinge height 2 in (5.1 cm) 2 in (5.1 cm)
Minimum transom height 14 in (35.6 cm) 14 in (35.6 cm)
Voltage 12V DC 12V DC
Actuators 2 x 15054-001 2 x 15054-001
Extension harnesses 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m)
Upper brackets 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal
Lower brackets 2 x 50014-001 2 x 50014-001
Switch included No No

Boat-length ranges are manufacturer selection guides, not compatibility guarantees. Confirm the complete transom installation and select a compatible Lenco control switch before ordering.

Specification

Specification 15000-101 15001-101 15002-101 15003-101 15007-101
Finish Standard Standard Standard Standard Standard
Tab size 9 x 9 in 9 x 12 in 9 x 18 in 9 x 24 in 12 x 12 in
Approx. metric size 229 x 229 mm 229 x 305 mm 229 x 457 mm 229 x 610 mm 305 x 305 mm
Recommended boat length 14–18 ft (4.3–5.5 m) 16–25 ft (4.9–7.6 m) 22–30 ft (6.7–9.1 m) 26–40 ft (7.9–12.2 m) 17–30 ft (5.2–9.1 m)
Hinge height 2 in (5.1 cm) 2 in (5.1 cm) 2 in (5.1 cm) 1 in (2.5 cm) 2 in (5.1 cm)
Minimum transom height 14 in (35.6 cm) 14 in (35.6 cm) 14 in (35.6 cm) 14 in (35.6 cm) 14 in (35.6 cm)
Voltage 12V DC 12V DC 12V DC 12V DC 12V DC
Actuators 2 x 15054-001 2 x 15054-001 2 x 15054-001 2 x 15054-001 2 x 15054-001
Extension harnesses 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m)
Upper brackets 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal
Lower brackets 2 x 50014-001 2 x 50014-001 2 x 50014-001 2 x 50014-001 2 x 50014-001
Switch included No No No No No

Electro-Polished Specifications

Specification 15113-101 15114-101
Finish Electro-polished Electro-polished
Tab size 9 x 12 in 12 x 12 in
Approx. metric size 229 x 305 mm 305 x 305 mm
Recommended boat length 16–25 ft (4.9–7.6 m) 17–30 ft (5.2–9.1 m)
Hinge height 2 in (5.1 cm) 2 in (5.1 cm)
Minimum transom height 14 in (35.6 cm) 14 in (35.6 cm)
Voltage 12V DC 12V DC
Actuators 2 x 15054-001 2 x 15054-001
Extension harnesses 2 x 30133-103, 20 ft (6.1 m) 2 x 30133-103, 20 ft (6.1 m)
Upper brackets 2 x 15085-001 with gland seal 2 x 15085-001 with gland seal
Lower brackets 2 x 50014-001 2 x 50014-001
Switch included No No

Boat-length ranges are manufacturer selection guides, not compatibility guarantees. Confirm the complete transom installation and select a compatible Lenco control switch before ordering.

View full details