Majoni Block 50 Pontoon Dock Impact Corner Boat Fender - Single

The Majoni Block 50 Pontoon Dock Impact Fender is a compact 50 x 12 x 7 cm berth bumper for pontoons, jetties and marina edges. It protects a defined contact point without occupying the full metre required by the Block 100.

Available in white or navy, the UV-resistant rotation-moulded PVC body has pre-moulded fixing positions for attachment to a suitable dock structure. Its compact length suits short edges, gaps between fittings and locations requiring several independently positioned fenders.

Product Identification

• Brand: Majoni
• Product name: Majoni Block 50 Pontoon Dock Impact Fender
• Marine Scene SKUs: SG-BLOCK-50 and SG-BLOCK-50-N
• Product category: Compact pontoon and dock fender
• Dimensions: 50 x 12 x 7 cm
• Approximate weight: 1.4 kg
• Colours: White or Navy
• Quantity supplied: One selected fender

What Is the Majoni Block 50 Used For?

It cushions localised hull contact at a berth, including short dock edges, narrow structural sections and spaces between cleats, ladders or services. Multiple units can be spaced along a longer edge.

What Is Included?

• One Majoni Block 50 dock fender in the selected colour
• Pre-moulded fixing positions
• Factory-fitted Majoni inflation valve where applicable

What Is Not Included?

• Mounting screws, bolts, washers or backing plates
• Dock reinforcement
• Inflation adaptor or pump
• Additional fenders for adjacent contact areas

How Do I Select Between Block 50 and Block 100?

Choose Block 50 for a compact 50 cm protected section or where fittings restrict the available length. Choose Block 100 for a continuous one-metre section. Several Block 50 units can be positioned independently to match the hull contact pattern.

Construction and Design

• 50 cm protected length
• 12 cm height and 7 cm depth
• UV-resistant rotation-moulded PVC
• Compact fixed-profile body
• White and navy colour options
• Pre-moulded mounting positions

Installation and Safety

Fix the fender to sound structural material with corrosion-resistant hardware and backing appropriate to the substrate. Use all necessary mounting points and avoid crushing the body. Confirm the fender aligns with the hull at all relevant water levels before normal berthing.

Maintenance

• Check the body for cuts, deformation and pressure loss.
• Inspect fixings and backing structure for corrosion or movement.
• Remove grit from the contact face.
• Rinse and clean with mild soap.
• Replace damaged units or loose fixings before use.

Key Features

• Compact 50 x 12 x 7 cm dock fender
• Approximate 1.4 kg weight
• UV-resistant rotation-moulded PVC
• White and navy variants
• Pre-moulded fixing positions
• Suitable for short dock sections and local contact points
• Can be combined with multiple units for longer coverage

Frequently Asked Questions

Are mounting fixings included?
No. Select corrosion-resistant fixings and backing hardware for the dock construction.

How is Block 50 different from Block 100?
Block 50 is 50 cm long; Block 100 is 100 cm long. Both are approximately 12 cm high and 7 cm deep.

Can multiple Block 50 fenders be installed together?
Yes. They can be spaced or aligned to cover several contact points.

Is it suitable for a corner?
It is primarily a compact straight-section fender. Use a Flex, Multi or Dock Wheel product where the berth geometry requires corner protection.

Can it absorb high-speed impact?
No dock fender has unlimited capacity. Approach and berth at a controlled speed.

Specifications

Confirm hull contact height, water-level variation and dock structural strength before installation.