Majoni Bow Impact Protector Stem Boat Fender

The Majoni Bow Impact Protector Stem Boat Fender is a compact V-shaped inflatable fender measuring approximately 60 x 14 cm. It is available in black, navy blue or white and is designed to sit directly over the bow stem for discreet protection during berthing.

Four integral rope eyes allow the fender to be restrained above and below the contact zone. Its rotation-moulded marine PVC body and replaceable brass valve provide a durable, serviceable solution for boats whose bow shape suits the fender profile.

Product Identification

• Brand: Majoni
• Product name: Majoni Bow Impact Protector Stem Boat Fender
• Marine Scene SKUs: SG-BOWFEN-BLACK, SG-BOWFEN-NAVY and SG-BOWFEN-WHITE
• Product category: V-shaped inflatable bow fender
• Dimensions: Approximately 60 x 14 cm
• Approximate weight: 1.8 kg
• Available colours: Black, Navy Blue or White
• Quantity supplied: One selected fender

What Is the Bow Impact Protector Used For?

It protects the narrow stem area when approaching pontoons, harbour walls or another vessel bow-first. The V-shaped body concentrates protection around the bow without adding the broader coverage of a full wrap-around bow buoy.

What Is Included?

• One Majoni bow impact protector in the selected colour
• Four integral rope eyes
• Factory-fitted Majoni brass inflation valve

What Is Not Included?

• Fender ropes
• Inflation adaptor or pump
• Deck fittings or mounting hardware
• Additional side fenders

How Do I Confirm Compatibility?

• Measure the length and width of the intended stem contact area.
• Check that the V-shaped profile can sit centrally without fouling the anchor, roller, navigation lights or bow fitting.
• Confirm that secure upper and lower tie points are available.
• Do not select by boat length alone; stem shape and mounting geometry are the controlling factors.

Construction and Design

• V-shaped body follows the bow stem
• Rotation-moulded marine PVC construction
• Four integral attachment eyes
• Replaceable Majoni brass inflation valve
• UV-resistant material suitable for normal marine exposure
• Compact profile intended to remain discreet at the bow

Fitting and Safety

Position the fender over the stem and secure all required attachment points with suitable lines. The fender should remain centred when the boat moves against the berth. Inflate only until firm and hand-compressible; do not add pressure beyond the manufacturer guidance. Remove or reposition it if it interferes with anchoring equipment, navigation lights or safe deck access.

Maintenance

• Rinse after use in salt or dirty water.
• Clean with mild soap and warm water.
• Inspect the rope eyes for wear before each use.
• Check the brass valve and air pressure periodically.
• Protect from sharp edges and prolonged compression during storage.

Key Features

• V-shaped stem protection
• Approximately 60 x 14 cm
• Four integral rope eyes
• Rotation-moulded marine PVC
• Replaceable brass inflation valve
• Black, navy-blue and white variants
• Compact alternative to a full wrap-around bow fender

Frequently Asked Questions

Is this the same as the larger Majoni Bow Buoy?
No. This model is a narrower V-shaped stem protector. The Bow Buoy wraps farther around the forward sides of the hull.

Are the fender lines included?
No. Select suitable lines for the available vessel attachment points.

What pressure should I use?
Majoni recommends approximately 0.2 bar for its inflatable fenders. The body should remain compressible by hand.

Can I inflate it with a needle?
No. Use a flat air nozzle or the correct Majoni brass-valve adaptor. A needle can damage the valve.

Is it suitable for every bow shape?
No. Check the vessel stem angle, contact area and clearance around bow equipment before ordering.

Specifications

Confirm the physical bow profile and available tie points before ordering; overall dimensions alone do not guarantee fit.