Majoni Dumpy Single Eye Boat Fender

The Majoni Dumpy Single Eye Boat Fender is a compact inflatable fender available in 15 x 30 cm and 18 x 36 cm sizes. Its short, broad body suits tenders, RIBs, fishing boats and other craft where a conventional long cylindrical fender would occupy too much space.

An integral eye at one end provides a simple hanging point, while the soft PVC body cushions contact with pontoons, harbour walls and neighbouring vessels. White and black variants are available in both sizes.

Product Identification

• Brand: Majoni
• Product name: Majoni Dumpy Single Eye Boat Fender
• Models: DUMPY-1 and DUMPY-2
• Marine Scene SKUs: SG-DUMPY-1, SG-DUMPY.B-1, SG-DUMPY-2 and SG-DUMPY.B-2
• Product category: Compact inflatable single-eye fender
• Available sizes: 15 x 30 cm or 18 x 36 cm
• Colours: White or Black
• Quantity supplied: One selected fender

What Is the Majoni Dumpy Fender Used For?

It protects a compact section of hull during low-speed berthing and alongside mooring. The short body is useful on small craft, around curved topsides and in storage-limited installations.

What Is Included?

• One Majoni Dumpy Fender in the selected size and colour
• Integral single attachment eye
• Factory-fitted Majoni inflation valve

What Is Not Included?

• Fender rope
• Inflation adaptor or pump
• Fender cover
• Additional side or bow fenders

How Do I Select the Correct Size?

• Measure the vertical or horizontal contact area.
• Choose the larger model for a broader contact surface and greater body volume.
• Confirm the eye and line can hold the fender at the required height.
• Use enough fenders to protect the complete side of the vessel.
• Consider freeboard, vessel weight and berth exposure rather than length alone.

Construction and Design

• Compact dumpy profile
• Single integral attachment eye
• Inflatable marine PVC body
• White and black variants
• Two sizes and weights
• Replaceable Majoni brass-valve inflation system

Rigging and Inflation

Rig the fender vertically from its single eye and adjust the line so the broadest part covers the expected contact zone. Inflate to approximately 0.2 bar or until the body is firm but compressible. Use the correct Majoni adaptor or a flat air nozzle and never use a needle.

Maintenance

• Rinse and clean after use.
• Inspect the eye, body and valve for damage.
• Check the fender line for chafe.
• Adjust pressure after major temperature changes.
• Store clean and dry away from sharp objects.

Key Features

• Compact single-eye design
• 15 x 30 cm and 18 x 36 cm sizes
• White and black colour options
• Inflatable marine PVC construction
• Suitable for tenders, RIBs and smaller craft
• Replaceable Majoni brass valve
• Easy vertical rigging

Frequently Asked Questions

Can the Dumpy Fender be hung horizontally?
Its single-eye design is primarily intended for vertical hanging. A horizontal installation requires a separate restraint arrangement and must not overload the eye.

Is fender rope included?
No. Select a suitable line for the vessel attachment point.

Which size should I choose?
Compare the available space and expected contact area. Use the larger model where broader coverage is required.

What pressure should I use?
Approximately 0.2 bar, keeping the body firm but hand-compressible.

Can I use a pump needle?
No. A needle can damage the brass valve. Use a flat air connection or Majoni adaptor.

Specifications

Fender size and quantity must suit the vessel, berth and expected contact points; no single fender provides complete hull protection.