Majoni Fender Ladder Boat Fender

The Majoni Fender Ladder Boat Fender combines an inflatable hull-protection fender with one to four moulded boarding steps. It is available in navy blue or white and provides a compact access aid for boarding from a low pontoon, tender or water level.

The soft PVC body rests against the topsides while the stepped profile provides footholds. Four lengths cover one-step to four-step configurations, allowing the boarding height to be matched to the vessel without assembling separate stackable sections.

Product Identification

• Brand: Majoni
• Product name: Majoni Fender Ladder Boat Fender
• Models: 1-STEP, 2-STEP, 3-STEP and 4-STEP
• Product category: Inflatable combined fender and boarding ladder
• Available configurations: One, two, three or four steps
• Colours: Navy Blue or White
• Construction: Soft UV-resistant marine PVC
• Recommended pressure: Approximately 0.2 bar / 2.9 psi
• Quantity supplied: One selected fender ladder

What Is the Majoni Fender Ladder Used For?

It provides a temporary boarding aid while also cushioning the hull where the ladder rests against the boat. Typical uses include stepping between a boat and low pontoon, boarding from a tender and providing an additional foothold near the waterline.

What Is Included?

• One Majoni inflatable fender ladder in the selected step count and colour
• Integral moulded step profile
• Integral rope-attachment sections
• Factory-fitted Majoni brass inflation valve

What Is Not Included?

• Attachment ropes
• Deck fittings or upper handholds
• Inflation adaptor or pump
• Certified rescue-ladder equipment
• Additional support or boarding platform

How Do I Select the Correct Step Count?

Measure from the intended upper attachment point to the lowest required foothold. Choose enough steps for the user to reach the vessel safely while keeping the ladder clear of propellers, thrusters and underwater fittings. Allow for tide, vessel loading and movement at the berth.

How Should It Be Fitted?

• Use strong marine ropes through both attachment sides.
• Secure the ropes to suitable vessel points.
• Hang the ladder as vertically as possible.
• Keep both sides at equal tension to avoid twisting the rope holds.
• Provide a secure handhold above the top step.
• Test the installation at the dock before routine use.

Construction and Design

• Inflatable soft-PVC body
• Combined hull fender and boarding aid
• One to four moulded step configurations
• Navy-blue and white variants
• Replaceable Majoni brass valve
• Compact shape for use at the topsides

Use and Safety

This product is a boarding aid and fender, not certified rescue, fall-arrest or load-lifting equipment. Inspect the body, rope holds, attachment lines and vessel fixing points before each use. Maintain three points of contact and do not use a damaged or poorly secured ladder.

Inflation and Maintenance

• Inflate to approximately 0.2 bar or until firm but hand-compressible.
• Use a flat air nozzle or the correct Majoni adaptor; never use a needle.
• Rinse after use in salt or dirty water.
• Inspect steps, rope holds, body and valve for wear.
• Check attachment ropes for chafe and UV damage.
• Store clean, dry and away from sharp objects.

Key Features

• Combined inflatable fender and boarding ladder
• One, two, three and four-step options
• Navy-blue and white colour variants
• Soft UV-resistant PVC construction
• Protects topsides while providing footholds
• Replaceable brass inflation valve
• Suitable for pontoons, tenders and water-level boarding
• Approximate 0.2 bar inflation pressure

Frequently Asked Questions

Is this a certified rescue ladder?
No. It is a fender and boarding aid. Carry approved safety and recovery equipment appropriate to the vessel.

Are attachment ropes included?
No. Use strong marine rope and suitable vessel attachment points on both sides.

Which step count should I choose?
Measure the boarding height and allow for tide and vessel movement. The lowest step must be reachable without extending into underwater hazards.

Can it remain deployed while the boat is underway?
No. Stow it securely before manoeuvring or travelling where it could strike the water, foul equipment or be lost.

What pressure should I use?
Approximately 0.2 bar / 2.9 psi, keeping the body firm but compressible.

How is this different from the stackable step?
This product is a complete moulded one-to-four-step ladder. The stackable product is sold as individual sections threaded onto separate ropes.

Specifications

Use secure attachment ropes and a separate handhold. No maximum user load is published, so the complete installation must be checked before every use.