Majoni Pear Pick-Up Buoy

The Majoni Pear Pick-Up Buoy is a high-visibility orange inflatable buoy with an integral moulded handle. It is available in 15 x 35 cm and 18 x 40 cm sizes, with published buoyancy figures of 5 kg and 8 kg respectively.

Its pear-shaped body and top handle make a mooring pick-up line easier to locate and retrieve from the deck. The handle opening accepts rope up to approximately 22 mm diameter, subject to the rope construction and splice or knot dimensions.

Product Identification

• Brand: Majoni
• Product name: Majoni Pear Pick-Up Buoy
• Models: F00PB-1 OR and F00PB-2 OR
• Marine Scene SKUs: SG-F00PB-1 OR and SG-F00PB-2 OR
• Product category: Inflatable mooring pick-up buoy
• Colour: Orange
• Available sizes: 15 x 35 cm or 18 x 40 cm
• Handle rope capacity: Up to approximately 22 mm diameter
• Quantity supplied: One selected buoy

What Is the Majoni Pick-Up Buoy Used For?

It marks and floats the pick-up end of a mooring line so the line can be recovered from the water using a boat hook or by hand. The bright orange body improves visibility and the moulded handle provides a defined lifting point.

What Is Included?

• One orange Majoni Pear Pick-Up Buoy in the selected size
• Integral moulded handle
• Factory-fitted inflation valve

What Is Not Included?

• Mooring rope or pick-up line
• Boat hook
• Shackles, thimbles or splicing service
• Inflation adaptor or pump

How Do I Select the Correct Size?

Select according to the diameter and weight of the pick-up line, the amount of hardware that must be supported, visibility requirements and local water conditions. The published buoyancy is not a working-load rating and must not be used to lift or suspend a person.

How Should the Rope Be Attached?

• Use rope no larger than the stated handle capacity.
• Allow for the increased diameter of knots, splices and protective sleeving.
• Use a secure marine knot or professionally formed splice.
• Position the buoy so the pick-up line remains accessible but cannot foul the propeller.
• Inspect the rope where it bears against the handle.

Construction and Design

• Pear-shaped inflatable body
• High-visibility orange colour
• Integral moulded pick-up handle
• Two size and buoyancy options
• Majoni brass-valve inflation system
• Soft body limits marking if it contacts the hull

Inflation and Safety

Inflate gradually to approximately 0.2 bar or until firm but hand-compressible. Use the correct Majoni adaptor or a flat air nozzle and never insert a needle. The buoy is a mooring-line marker and flotation aid; it is not a life-saving appliance or lifting device.

Maintenance

• Rinse after exposure to salt, mud or harbour contamination.
• Inspect the body, handle, rope and valve regularly.
• Check that the buoy remains inflated and clearly visible.
• Replace the rope if it shows glazing, cuts or wear at the handle.
• Store clean, dry and away from sharp objects.

Key Features

• High-visibility orange body
• Integral moulded pick-up handle
• 15 x 35 cm and 18 x 40 cm sizes
• Published buoyancy of 5 kg or 8 kg
• Accepts rope up to approximately 22 mm
• Inflatable marine PVC construction
• Suitable for mooring pick-up lines

Frequently Asked Questions

Is mooring rope included?
No. The product is the buoy only.

What rope diameter fits through the handle?
The stated maximum is approximately 22 mm, but knots, splices and sleeves may require additional clearance.

Can I use the buoy to lift equipment?
No. The buoyancy figure is not a certified lifting or safe-working-load rating.

Is it a life-saving buoy?
No. It is a mooring pick-up buoy and is not approved as personal flotation or rescue equipment.

How should it be inflated?
Use the correct Majoni valve adaptor or a flat air nozzle and keep the body firm but compressible.

Specifications

Published buoyancy is for model comparison and flotation planning; it is not a certified lifting or mooring-load rating.