Majoni Pontoon Impact Corner Boat Fender Dock Wheel

The Majoni Pontoon Impact Corner Fender Dock Wheel combines a 300 mm inflatable wheel with a reinforced mounting bracket. Installed at a pontoon or dock corner, the rotating wheel guides the hull around the corner while cushioning low-speed contact.

Unlike a fixed corner pad, the wheel turns as the vessel moves alongside, reducing concentrated rubbing at one point. It is intended for sharp corners and approach areas where the boat commonly contacts the dock during berthing.

Product Identification

• Brand: Majoni
• Product name: Majoni Pontoon Impact Corner Fender Dock Wheel
• Marine Scene SKU: SG-DOCK-WHEEL
• Product category: Inflatable rotating dock-corner fender
• Wheel size: 300 mm diameter x 150 mm wide
• Bracket size: Approximately 138 x 155 x 85 mm
• Approximate weight: 1.2 kg
• Quantity supplied: One wheel and bracket assembly

What Is the Majoni Dock Wheel Used For?

It protects a vessel and dock at a corner where the hull may contact while turning into or out of a berth. The rolling action allows the boat to move past the corner rather than dragging continuously across a fixed pad.

What Is Included?

• One white inflatable Majoni dock wheel
• One reinforced marine-polymer mounting bracket
• Wheel axle and associated assembly components

What Is Not Included?

• Dock-mounting bolts, screws, washers or backing plates
• Inflation adaptor or pump
• Additional straight dock fenders
• Structural reinforcement for the pontoon

How Do I Confirm the Dock Wheel Is Suitable?

• Identify the precise corner contact point at the normal water level.
• Allow for tide, vessel loading and changing freeboard.
• Check that the bracket can be fixed to sound structural material.
• Confirm that the wheel can rotate freely without hitting cleats, ladders or dock services.
• Ensure the hull will contact the wheel rather than the bracket.

Construction and Design

• 300 mm diameter inflatable wheel
• 150 mm wheel width
• Reinforced nylon or ABS-type marine bracket
• Approximately 8 mm mounting holes
• White wheel for high visibility
• Rotating geometry guides the hull around a corner

Installation and Safety

Use corrosion-resistant through-bolts or other correctly engineered fixings for the dock substrate. Back the bracket where necessary and tighten it squarely so the wheel rotates without binding. Test at low speed and inspect the hull-to-wheel contact path before relying on the installation.

Maintenance

• Confirm that the wheel rotates freely.
• Check the axle and bracket for wear, cracking and movement.
• Inspect mounting hardware and backing structure for corrosion or loosening.
• Maintain the wheel firm but compressible.
• Rinse grit and salt from the wheel and bracket.
• Replace damaged parts before the berth is used.

Key Features

• 300 x 150 mm inflatable wheel
• Rotating action guides the hull around a corner
• Reinforced marine-polymer bracket
• Compact installation for pontoon and dock corners
• White wheel for visibility
• Approximate 1.2 kg assembly weight
• Suitable for repeated low-speed berthing contact

Frequently Asked Questions

Are dock-mounting bolts included?
No. Select fixings and backing hardware for the dock structure and marine environment.

Does the wheel rotate?
Yes. The wheel is designed to turn as the hull moves around the corner.

Can it replace all other dock fenders?
No. Use straight, flexible or additional corner protection wherever the hull can contact outside the wheel area.

What pressure should the wheel have?
Keep it firm but hand-compressible and follow the Majoni inflation guidance for the fitted valve.

Can it be mounted to a weak fascia board?
No. The bracket must be attached to sound material capable of carrying repeated docking loads.

Specifications

Confirm the complete hull contact path and the strength of the dock structure before installation; mounting hardware is not included.