Majoni Pontoon Multi Wrap Around Dock Impact Boat Fender

The Majoni Pontoon Multi Wrap-Around Dock Impact Fender is a flexible 60 x 30 x 8 cm dock pad designed to wrap around corners, posts and pilings or lie flat along a berth edge. Its sectioned body follows irregular surfaces more readily than a rigid block fender.

Available in white or navy, the Multi Fender provides a broad contact area for low-freeboard boats, swim platforms and other hull sections that may meet the pontoon during berthing. The approximately 3 kg body can be fixed through its designated mounting areas using hardware selected for the dock structure.

Product Identification

• Brand: Majoni
• Product name: Majoni Pontoon Multi Wrap-Around Dock Impact Fender
• Marine Scene SKUs: SG-MULTI-1-W and SG-MULTI-1-N
• Product category: Flexible pontoon and dock fender
• Dimensions: 60 x 30 x 8 cm
• Approximate weight: 3.0 kg
• Colours: White or Navy
• Quantity supplied: One selected fender

What Is the Majoni Multi Fender Used For?

It protects areas where a flat strip cannot follow the dock geometry. The flexible body can be formed around a corner, post or piling, while the broad face also suits straight low-freeboard contact areas.

What Is Included?

• One Majoni Multi Fender in the selected colour
• Integral flexible sections and mounting areas

What Is Not Included?

• Mounting screws, bolts, washers or backing plates
• Dock reinforcement
• Additional straight or wheel fenders
• Installation service

How Do I Select the Mounting Position?

• Observe where the hull or swim platform contacts during normal approach.
• Allow for tide and vessel loading.
• Place the broad face across the complete contact zone.
• Wrap only to a radius the fender can follow without excessive stress.
• Keep the installation clear of cleats, ladders, power outlets and pedestrian routes.

Construction and Design

• Flexible sectioned body
• 60 cm length, 30 cm width and 8 cm depth
• Broad impact-distribution area
• Can be used flat or wrapped around suitable corners and posts
• White and navy colour variants
• Marine PVC construction for berth-side use

Installation and Safety

Attach the fender to sound structural material using corrosion-resistant hardware and adequate backing. Use all relevant mounting areas and avoid over-tightening, which can distort or tear the body. Test the berth at low speed before normal use.

Maintenance

• Inspect the body, folds and mounting points for cracking or abrasion.
• Check every fixing and the dock substrate.
• Remove grit that could abrade the hull.
• Rinse with fresh water and clean with mild soap.
• Replace the fender if the flexible sections become split or permanently distorted.

Key Features

• Flexible wrap-around dock protection
• 60 x 30 x 8 cm
• Approximately 3 kg
• Broad sectioned contact surface
• Suitable for corners, posts, pilings and straight edges
• Useful for low-freeboard boats and swim platforms
• White or navy colour options

Frequently Asked Questions

Can it be fitted around a dock corner?
Yes, provided the corner radius does not overstress the fender and the mounting points are correctly supported.

Can it be used on a straight edge?
Yes. The broad face can also provide flat dock-edge protection.

Are mounting fixings included?
No. Select corrosion-resistant hardware for the specific dock material.

Is it inflatable?
The Multi Fender is a flexible moulded dock fender rather than a conventional air-filled cylindrical fender.

How many are needed?
Use enough units to cover every expected contact area along the berth.

Specifications

Choose the mounting hardware and backing arrangement for the dock structure; universal fixings are not included.