Majoni Stackable Boat Fender Ladder Step

The Majoni Stackable Boat Fender Ladder Step is an individual inflatable PVC section that can be threaded onto two side ropes to create a customised boarding ladder. Each section measures 25 x 20 x 12 cm and also acts as a fender against the hull.

The product is sold as one step, not a complete multi-step ladder. Order the required number of matching sections and assemble them on suitable marine rope, keeping the ladder vertical so the rope channels are loaded evenly.

Product Identification

• Brand: Majoni
• Product name: Majoni Stackable Boat Fender Ladder Step
• Marine Scene SKUs: SG-FEN-LAD-N and SG-FEN-LAD-W
• Product category: Stackable inflatable fender-ladder section
• Dimensions per step: 25 x 20 x 12 cm
• Approximate weight per step: 1.1 kg
• Colours: Navy Blue or White
• Quantity supplied: One individual step

What Is the Stackable Fender Ladder Step Used For?

Multiple sections can be assembled vertically to create a boarding aid for access from a low pontoon, tender or water level. The inflated PVC body also cushions the hull where the ladder rests against the boat.

What Is Included?

• One Majoni stackable step in the selected colour
• Integral side rope channels
• Factory-fitted inflation valve

What Is Not Included?

• Side ropes
• Upper attachment hardware
• Additional step sections
• Inflation adaptor or pump
• Certified fall-arrest or rescue equipment

How Many Steps Do I Need?

Measure the vertical distance from the secure attachment point to the lowest required foothold. Each section adds approximately 20 cm of height, but allow for spacing, rope stretch, attachment knots and the position of the lowest step. The ladder must not extend into propellers, thrusters or other hazards.

How Is the Ladder Assembled?

1. Select two equal lengths of strong marine rope that pass through the side channels.
2. Thread the same number of step sections onto both ropes in the same orientation.
3. Set consistent spacing and secure the ropes so the sections cannot bunch together.
4. Attach both ropes to independent or adequately rated vessel points.
5. Hang the ladder as vertically as possible and test it close to the dock before use.

Construction and Design

• Individual 25 x 20 x 12 cm inflatable section
• Approximately 1.1 kg per step
• Dual side rope channels
• Navy-blue and white options
• Stackable system can be configured to the required length
• Fender surface protects the hull while the assembly is hanging

Use and Safety

This is a boarding aid, not certified rescue, fall-arrest or load-lifting equipment. Inspect the step bodies, valves, ropes, knots and vessel attachment points before every use. Maintain three points of contact, use handholds where available and do not exceed any vessel or installation limit.

Maintenance

• Rinse and dry after use.
• Inspect each section for cuts, soft spots and valve leakage.
• Check both ropes for chafe, UV damage and salt hardening.
• Replace any damaged section rather than using a partially failed ladder.
• Store deflated or lightly inflated without sharp folds.

Key Features

• Sold as one individual stackable step
• 25 x 20 x 12 cm per section
• Approximately 1.1 kg per section
• Create a customised ladder length
• Dual-purpose fender and boarding aid
• Navy-blue and white options
• Threaded onto two side ropes
• Inflatable PVC construction

Frequently Asked Questions

Does one purchase include a complete ladder?
No. Each purchase includes one individual step. Order multiple sections to build a longer ladder.

Is the rope included?
No. Two suitable marine ropes and secure vessel attachment points are required.

How much height does one step add?
Each section is approximately 20 cm high, but the finished spacing depends on the rope assembly and knots.

Can it be used as a rescue ladder?
It is a boarding aid and fender, not certified rescue or fall-arrest equipment.

Should I add more air before use?
Only adjust pressure if necessary. Keep each section firm but compressible and use the correct Majoni valve adaptor.

Specifications

This product is sold as one step section. Rope, upper attachment hardware and additional sections are purchased separately.