Rule 56S 4000 Series Automatic Submersible Bilge Pump - 4000 GPH
Rule 56S 4000 Series Automatic Submersible Bilge Pump - 4000 GPH
Location:
SKU:CW-56S
Couldn't load pickup availability
Rule 56S 4000 Automatic submersible bilge pump with a flow rate of up to 252 LPM (66 GPM).
The Rule automatic bilge pump turns on and checks for water every 2 1/2 minutes, during this check the pump runs for approximately 1 second and checks for resistance or drag against the impeller. If resistance is encountered, it will run until water is no longer present.
The Rule submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components.
The Rule 4000 range of small submersible bilge pumps are recommended for discharge heads up to a maximum of 4 metres. The submersible bilge pump meets ISO8846 marine (ignition) and ISO8849 marine (bilge pump) standards.
- Fully automated bilge pump with computerised operation.
- High capacity pump for larger vessels.
- Quick release inlet strainer allows rapid cleaning.
- Ignition protected.
- No need for a separate float switch.
- Third wire for manual override or warning light.
| Approvals | ISO8846 marine (ignition), ISO8849 marine (bilge pump) standards, CE Certification |
| Flow Rate Description | 15,142 LPH (4000 US GPH) |
| Flow Rate 1 Metre Head | 13,351 LPH (3527 US GPH) |
| Fuse | 25A |
| Height Description | 235mm (9.25"), Switch cut in height: 38mm (1.5") |
| Outlet | 50mm (2") ID Hose |
| Series | Rule 4000 |
| Voltage Description | 12V DC |
| Width | 135mm (5.3") |
| Automatic Bilge Pumps | Yes |
| Maximum Pump Head | 2.3 to 4.27 Metres |
| Diameter Description | Base: 135mm |
| Flow Rate 2 Metre Head | 11,174 LPH (2952 US GPH) |
| Hose Size | 51mm / 2" |
| Maximum Recommended Head | 4 Metres (13.1 Feet) |
| Model | 56S |
| Amps Description | 15.5A at 12V, 20A at 13.6V |
Share
